• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.80-88
• /
• 2020

Supercritical fluid dyeing is a new alternative to the conventional aqueous process because of its environmental benefits. In this study, dyeing properties of Nylon 6 fabrics were investigated depending on dyeing temperature and pressure in supercritical CO₂ fluid dyeing system. In order to select the optimal condition for supercritical fluid dyeing of Nylon 6 fabrics, dyeing temperature and pressure were varied from 100, 110, 120℃, 200, 230, 260bar, respectively. The results of K/S values and levelling properties showed that the optimal dyeing condition for Nylon 6 fabrics was 110℃ and 230bar in the supercritical CO₂ fluid dyeing system. The washing fastness ratings of the dyed Nylon 6 fabrics under supercritical medium were good for both fading and staining except for staining on nylon.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1220-1223
• /
• 2003

본 연구에서는 반도체 성질을 지닌 TiO$_2$ 분말과 촉매적 활성이 높은 물질로 예상되는 TiO$_2$-CdS계 분말을 초임계 유체법으로 제조하였다. 초임계유체법을 이용하여 제조된 미 분말들은 2-3$mu extrm{m}$ 크기의 응집체였고, 20nm크기의 아주 미세한 1차 입자들로 이루어져있었다. 또한 초임계 유체법으로 어떤 열처리 없이도 아나타제 결정질 분말을 얻을 수 가 있었다.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.25-32
• /
• 2019

The influence of the contact amount of carbon dioxide per unit mass of dyestuff(${\alpha}$) on dyeing uniformity in supercritical fluid dyeing is analyzed in this study. The experiments using a 5L class Pilot Scale dyeing machine is carried out for this study purpose. For a fixed temperature and pressure, the amount of sample and the dyeing leveling time were considered as process variables. The results show that the increase in the amount of the sample causes a higher color difference than the reference sample, and it also increases the amount of residual dye. On the other hand, the color difference tended to decrease with the increase in dyeing time. Based on these results, the correlation between ${\alpha}$ value and dyeing uniformity in supercritical fluid dyeing is obtained.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3540-3550
• /
• 2022

The supercritical carbon dioxide (S-CO₂) Brayton cycle is an important energy conversion technology for the fourth generation of nuclear energy. Since the printed circuit heat exchanger (PCHE) used in the S-CO₂ Brayton cycle has narrow channels, Rayleigh-Bénard (RB) convection is likely to exist in the tiny channels. However, there are very few studies on RB convection in supercritical fluids. Current research on RB convection mainly focuses on conventional fluids such as water and air that meet the Boussinesq assumption. It is necessary to study non-Boussinesq fluids. PRB convection refers to RB convection that is affected by horizontal incoming flow. In this paper, the computational fluid dynamics simulation method is used to study the PRB convection phenomenon of non-Boussinesq fluid-supercritical carbon dioxide. The result shows that the inlet Reynolds number (Re) of the horizontal incoming flow significantly affects the PRB convection. When the inlet Re remains unchanged, with the increase of Rayleigh number (Ra), the steady-state convective pattern of the fluid layer is shown in order: horizontal flow, local traveling wave, traveling wave convection. If Ra remains unchanged, as the inlet Re increases, three convection patterns of traveling wave convection, local traveling wave, and horizontal flow will appear in sequence. To characterize the relationship between traveling wave convection and horizontal incoming flow, this paper proposes the relationship between critical Reynolds number and relative Rayleigh number (r).

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3107-3110
• /
• 2014

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.48-64
• /
• 2019

With evolution in the production environment of the textile industry, the need for non-water-based dyeing technologies and eco-friendly process facilities in the dyeing and processing stages has increased. In recent years, supercritical fluid dyes have been developed and commercialized in Europe, centering on this demand. However, so far, such dyes have been mainly applied in the processing of PET fibers. Basic research has mainly involved investigation of dyeing by supercritical carbon dioxide or solubility of such dyes, and more in-depth research should be continuously carried out. In this review, we describe the types and characteristics of supercritical fluids that exhibit specific properties at pressures and temperatures over the critical point. In addition, the state of the art in the dyeing and processing technology using supercritical fluids and associated, processing problems, environmental regulation, and wastewater treatment issues are described in detail. We hope this review can contribute to the supercritical fluid technology being further developed as an environment friendly dyeing processing method. Furthermore, we expect that the technique can be used as a means of ensuring different, high-quality dyed products.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.384-390
• /
• 2007

본 연구는 $CO_2$ 초임계 유체를 도금액과 혼합하여 PET 필름 위에 무전해 구리도금을 실시하였으며 초임계 유체의 혼용조건에 따른 그 도금 효과를 비교하였다. 이산화탄소 초임계 유체와 도금액의 부피비는 1:9가 최적이였으며 초임계 유체가 10 vol% 이상이 되면 혼합액의 분산성이 불량해져 층분리가 발생하였다. 구리 무전해도금은 $25^{\circ}C$, 15 MPa 에서 수행된 구리막의 표면물성이 가장 균일하였다. 무전해 구리도금에서 도금액과 혼합시킨 초임계 유체의 역할은 단순히 용해도를 높여 주는 것이 아니라 도금막을 구성하는 구리입자를 1차 입자상태로 분산, 유지시킴을 확인하였다.

• 공업화학
• /
• 제16권5호
• /
• pp.609-613
• /
• 2005

토종콩에 포함된 daidzein과 genistein을 초임계 $CO_2$와 아임계/초임계 $H_2O$를 이용하여 추출하였다. 추출액은 역상 고성능 액체 코토마토그래피(RP-HPLC)를 사용하여 분석하였다. 초임계 유체의 온도와 압력, 에탄올 농도의 변화에 따라서 비배당체의 체류시간, 체류인자, 컬럼효율, 컬럼의 선택도, 분리도를 비교하였다. 초임계 $CO_2$를 사용하였을 때, daidzein과 genistein의 추출특성은 온도와 에탄올농도의 영향을 주로 받았다. 아임계/초임계 $H_2O$를 사용하였을 때는 초임계 상태의 $400^{\circ}C$, 250 bar에서의 추출효율이 가장 우수하였다. 일반적으로 초임계 $CO_2$를 사용하는 경우, 초임계 $H_2O$에 비해서 약 10배 이상 비배당체의 추출수율이 증가하였다.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1023-1027
• /
• 2002

본 연구에서는 초임계 mixing을 이용하여 $SrTiO_3:\;Pr^{3+}$ 형광체 분말을 제조하였으며, 일반적 제조 방법인 고상법으로 제조된 분말과 발광특성을 비교하였다. 초임계 mixing에 의해 제조된 $SrTiO_3:\;Pr^{3+}$ 형광체 분말은 단상의 perovskite 구조를 갖으며, 형상은 구형인 좁은 입도분포를 보인다. 발광특성의 증대를 sensitizer인 $Al^{3+}$과 $Ga^{3+}$을 첨가하여 형광체의 발광특성을 관찰하였다.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.481-484
• /
• 2004

본 연구에서는 촉매적 활성이 높은 물질로 예상되는 TiO$_2$와 TiO$_2$-CdS계 분말을 초임계 유체법으로 제조하였다. 제조된 TiO$_2$ 광촉매 분말들은 결정질 아나타제로서 비표면적이 넓은 초미립의 구형이었다. 초임계 유체법으로 제조된 TiO$_2$ 광촉매는 유해 유기물인 DCA(Dichloroactic Acid)의 광분해반응의 실험 결과 기존 광촉매 보다 우수한 물성을 보였다.