• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1133-1145
• /
• 2000

It is necessary to develop an efficient analysis method to identify the dynamic characteristics of a large mechanical structure and update its finite element model. That is because these processes need the huge computation of a large structure and iterative estimation due to the use of the first- order sensitivity. To efficiently carry out these processes, a new method, called the generalized free-interface mode sensitivity method, has been proposed in the authors' preceeding paper. This method is based on substructuring approach such as a free-interface method and a generalized synthesis algorithm. In this paper, the proposed method is applied to the model updating of a car body structure to verify its accuracy and reliability for a large mechanical structure.

• 전산구조공학
• /
• 제7권1호
• /
• pp.91-98
• /
• 1994

선박, 자동차, 항공기등 수송체 구조해석에 유한요소법이 사용됨에 따라 초기 설계 후 대형 복합구조물의 해석이 ANSYS, NASTRA등의 범용 유한요소 코드에 의해 수행되고 있다. 설계변경을 시도할 때 설계자의 경험과 인지만으로 대형 구조물의 성능변경을 예측하기는 어렵다. 비록 대형 컴퓨터의 사용으로 구조 재해석이 용이하나 정량적 및 이론적 설계수정방향 없이는 인력과 계산시간 소모를 초래하고 때로는 시간 제약으로 충분한 재해석을 못할 수가 있다. 이때 긴요하게 사용될 수 있는 정보는 민감도로서 설계변수 변화에 대한 구조응답 변화를 수치적으로 나타내므로 설계변경에 도움을 줄 수 있다. 본 논문에서 계산된 정확한 민감도는 선체데크구조와 수송체구조물 프레임 강성도를 설계 변수로 하였으며 구조물 진동저감 설계에 사용될 수 있다. 즉 유한요소법에 의한 구조 재해석에 의하지 않고 민감도 값으로 구조 진동변위 증감을 예측할 수 있음이 예제로 보여지고 있다.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.74-81
• /
• 1996

This paper is to estimate sizing design sensitivity of linear and nonlinear vehicle frame structure using structural ananlysis result from ANSYS. Using design sensitivity results, optimal design of plane vehicle frame structure with buckling constraint is carried out the gradient projection method. Optimal design results are compares gradient projection method resrult with SUMT result.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.354-357
• /
• 2004

In this paper, a sensitivity analysis technique is presented for performing effective structural optimization of bus system. Design sensitivities are analyzed on natural frequency of bus substructures using super-element. Vibration modes of substructure, which large affect on the global vibration mode of bus B.I.W., are found through the sensitivity analysis using the chain rule. And design variables, which are determined from the sensitivity analysis, are changed through optimum design.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.750-756
• /
• 2006

This study predicts the modified eigenvectors and eigenvalues of the non-proportional damped structure due to the change in the mass, damping and stiffness of structure by iterative method of the sensitivity coefficient using the original dynamic characteristic. The method is applied to the non-proportional damped 3 degree of freedom system by modifying the mass, damping and stiffness. The predicted dynamic characteristics are showed a good agreement with these from the structural reanalysis using the modified mass, damping and stiffness.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.20-30
• /
• 1994

The lossless bounded real(LBR) two-pair cascade structure is one of the exiting low-sensitivity digital filter structures such as wave digital filters(WDFs) orthogonal filters. They are known to have the same structures which are composed of canonic building blocks interconnected to each other. The LBR two-pair cascade filters amount to describing in a unified manner the existing canonic low-sensitivity filters in terms of transfer matrices and chain matrices. However the existing structures have somewhat degraded low-sensitivity performance because they include dependent parameters within their structures. In this paper we propose a filter structure called “two-type-interlaced(TTI) structure.” eliminating such problem completely. This structures can be viewed as the WDFs of analog ladder circuits. As ladder circuits are obtained by cascading Brune sections and merging neighboring inductors or capacitors. so TTI structures at e obtained by cascading Type 3 LBR two-pairs and merging neighboring Type 1 LBR two-pairs. Next, a test procedure called “LBR test” is also presented in this paper. which determines whether of not the quantized TTI structure is stable . If it is unstable we can fine-tune the quantized parameters to make the overall structure stable. Therefore we can solve the dependent parameter problem completely with TTI structure along with LBR test. test.

• 전산구조공학
• /
• 제11권1호
• /
• pp.161-170
• /
• 1998

길이가 긴 원통형 실린더를 구성하는 데에 사용될 조인트 부재에 대한 공차설계를 수행하였다. 즉, 원통형 실린더를 체결할 때 사용되는 조인트 부품 가운데 스터드 볼트를 최소 민감도해석에 의해 공차설계를 하였다. 조인트 부재의 공차설계를 위한 최소 민감도 해석에 의한 정식화는 목적함수가 폰 마이세스 응력의 공차에 대한 민감도이고, 여러 부등호 제약식 중에서 자중이 부등호 제안식에 포함된다. 조인트 부재의 경우 자중에 대한 타당한 부등호 제안식을 설정하기 위하여 우선 확정적인 경우에 대한 최적설계를 수행하여 그 범위값을 선정하였다. 원통형 부재의 구조 응답은 축대칭 유한요소로서 구조해석을 수행하여 제안식을 설정하였으며, 직접미분에 의해서 설계 민감도를 구하여 ,최적화 알고리즘과 결합하여 최적의 공차를 제시하였다.

• 센서학회지
• /
• 제27권4호
• /
• pp.269-274
• /
• 2018

High-sensitivity signal-to-noise ratio (SNR) microphones are essentially required for a broad range of automatic speech recognition applications. Piezoelectric microphones have several advantages compared to conventional capacitor microphones including high stiffness and high SNR. In this study, we designed a new piezoelectric membrane structure by using the finite elements method (FEM) and an optimization technique to improve the sensitivity of the transducer, which has a high-quality AlN piezoelectric thin film. The simulation demonstrated that the sensitivity critically depends on the inner radius of the top electrode, the outer radius of the membrane, and the thickness of the piezoelectric film in the microphone. The optimized piezoelectric transducer structure showed a much higher sensitivity than that of the conventional piezoelectric transducer structure. This study provides a visible path to realize micro-scale high-sensitivity piezoelectric microphones that have a simple manufacturing process, wide range of frequency and low DC bias voltage.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.57-62
• /
• 1991

For the purpose of developing the method for efficiently calculating the design sensitivity and the reliability for the complicated structure such as ship structure, the probabilistic finite element method is introduced to formulate the deterministic design sensitivity analysis method and incorporated with the second moment reliability methods such as MVFOSM, AFOSM and SORM. Also, the probabilistic design sensitivity analysis needed in the reliability-based design is performed. The reliability analysis is carried out for the initial yielding failure, in which the derivative derived in the deterministic desin sensitivity is used. The present PFEM-based reliability method shows good agreement with Monte Carlo method in terms with the variance of response and the associated probability of failure even at the first or first few iteration steps. The probabilistic design sensitivity analysis evaluates explicitly the contribution of each random variable to probability of failure. Further, the reliability index variation can be easily predicted by the variation of the mean and the variance of the random variables.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.42-49
• /
• 1995

In this study, the optimum structural modification of the L-type structure by shape changes is suggested. The vibration characteristics of L-type structure are analyzed by the sub-structure synthesis method, and the coordinte sensitivities of each sub-structure are calculated and the change quantities of the positions to be modified are suggested by using the coordinate sensitivities. The results obtained are as follows : 1. The sensitivities of the natural frequency could be calculated by the sensitivity analysis. 2. The change quantities of the position to be modified could be suggested by the optimum structural modification method. 3. The developed program could reduce the process and time of computation, since the sensitivity was directly calculated by differential method, not finite difference method.