• 보존과학연구
• /
• 통권33호
• /
• pp.99-108
• /
• 2012

백색부후균(Trametes versicolor)과 갈색부후균(Tyromyces palustris)은 목조문화재 및 건축물 등의 목재 조직의 건조, 부패과 균열, 스펀지화, 변색 등 다양한 손상을 발생시켜 구조적, 미학적인 관점에서 심각한 문제를 나타내고 있다. 그리고 가장 피해를 많이 주는 해충인 흰개미(Reticulitermes speratus Kyushuensis Morimoto)는 목조건축물의 옥외 기둥이나 대들보 등의 표층을 얇게 남겨두고 내부를 침해함으로써, 결국은 속이 빈 기둥이 되어 건축물이 무너져버리는 피해를 줄 수 있다. 대표적 피해 미생물인 목재부후 균이 흰개미의 서식에 미치는 영향을 파악하기 위하여 부후균이 만연된 곳에 흰개미를 넣어 공존 가능성을 실험해 보았다. 목재의 중량으로 피해율을 산정한 결과, 전반적인 총질량은 두 종류의 부후균에서 모두 감소하였다. 목재의 질량은 백색부후균에서는 모두 감소하였으나, 갈색부후균에서는 오히려 증가한 경향을 볼 수 있었다. 그리고 섭식량을 측정하기 위한 목재의 건조 후 질량에서는 갈색부후균에 넣었던 목재의 질량 감소가 더 크게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제46권3호
• /
• pp.213-220
• /
• 2018

리기다소나무를 구조용 집성재의 재료로 이용하기 위해 판면의 옹이와 대패가공 후 방치시간에 따른 수지 삼출량이 레조르시놀수지로 접착한 판재의 접착성능에 미치는 영향을 검토하였다. 고온($120{\sim}95^{\circ}C$) 및 저온($65{\sim}50^{\circ}C$)에서 건조한 리기다소나무의 수지 삼출량은 판목면이 정목면 보다 저온건조재가 고온건조재보다 많았다. 방치시간별로는 저온건조재는 3일째 고온건조재는 7일째에 최고함량을 보였고, 이후부터는 서서히 감소하여 15~90일에는 거의 차이가 없었다. 접착성능은 수지의 삼출이 많은 2~3일까지는 낮았으나 15일 이후에는 큰 차이가 없었으며, 고온 및 저온 건조재 모두 방치시간에 관계없이 KS 기준의 접착성능을 만족하였다. 옹이부가 포함된 적층 구성에서의 접착강도는 KS의 접착강도 기준 이상이었으나 목파율은 기준인 65% 이상을 만족하지 못하였다. 적층 단면구성(정목+정목, 판목+판목, 정목+판목)에 따른 접착성능은 고온 및 저온건조재 모두 모든 적층구성에서 KS의 기준을 크게 상회하였다.

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.360-371
• /
• 2016

폴 루돌프의 플로리다 지역 주택은 2차 세계대전 이후 형식적인 근대 건축에서 탈피한 다양한 공간 구성, 지역 재료 및 구법의 사용으로 지역적 특성을 반영한 사례이다. 플로리다 주택 작품은 시대적, 지역적인 특성을 기반으로 하여 공간의 확장 및 연결 그리고 지역 환경을 고려한 재료 및 구법, 구조 시스템을 표현해야 한다는 설계 개념이 반영된 건축이다. 플로리다 주택의 특성은 공간 확장 및 외부 공간 연결 기법으로 목재 구조체를 중심으로 한 공간 확장과 가변적 공간구현 그리고 외부공간의 적극적인 연계성을 유도하기 위하여 다양한 방법(스크린 지붕, 오픈 지붕, 내부 파티오)을 사용하였다. 그리고 지역 재료 사용 그리고 지역 환경에 적합한 디테일 및 구법 사용으로 플로리다 지역의 석회암과 사이프러스 목재를 주된 재료로 사용하고, 고온 다습한 기후에 적합한 디테일과 지역 건설 환경을 고려한 구법을 사용하였다. 폴 루돌프의 플로리다 주택 연구를 통하여 현대 건축의 지역성을 고려한 계획에 구체적으로 적용 가능한 공간적, 기술적 적용 방법에 대한 모범사례로서 제안하는데 그 의미를 찾고자 한다.

• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.141-151
• /
• 2007

The appearance of many Glass Fiber Reinforced Plastic (GFRP) constructions look like ordinary steel construction, because GFRP has been imitated by the same way with the traditional steel's cross section as well as connection system. In terms of detachable connection, there was not enough appropriate option of GFRP connection, such as a traditional bolt connection for steel and wood structures. Most of all, from material characteristic of GFRP related to the deficient ductility, the shearstress principle of GFRP s not proper for the material property, which causes ineffective and not economic application of material. With this research problem, the innovative and detachable onnection system, which is more considered with appropriate material characteristic for FRP, is developed. Not only short time but also long time research with various connection variations is carried out.

• Earthquakes and Structures
• /
• 제3권6호
• /
• pp.869-887
• /
• 2012

Ground motion scaling techniques are actively debated in the earthquake engineering community. Considerations such as what amplitude, over what period range and to what target spectrum are amongst the questions of practical importance. In this paper, the effect of various ground motion scaling approaches are explored using three reinforced concrete prototypical building models of 8, 12 and 20 stories designed to respond nonlinearly under a design level earthquake event in the seismically active Southern California region. Twenty-one recorded earthquake motions are selected using a probabilistic seismic hazard analysis and subsequently scaled using four different strategies. These motions are subsequently compared to spectrally compatible motions. The nonlinear response of a planar frameidealized building is evaluated in terms of plasticity distribution, floor level acceleration and uncorrelated acceleration amplification ratio distributions; and interstory drift distributions. The most pronounced response variability observed in association with the scaling method is the extent of higher mode participation in the nonlinear demands.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.809-815
• /
• 2007

The floor structure of railway vehicles consists of plywood, rubber, and wood keystone plate which affects on the comfort of passengers. Its structural characteristics has been investigated experimentally and numerically for samples of beam and plate structure, and the real floor structure in this paper. The material properties of etch part measured directly by experiments. The deformation and stress distribution of the sample beams for 6 different joints were sought experimentally and calculated using a commercial software. The numerical calculation shows that the effect of friction and clearance between joints is crucial. The DMU/EMU plates were also experimented and compared for different loading conditions. The structural characteristics of the whole floor structure were calculated numerically. The results show that the method of joint between plywoods is an important factor to decide the strength of the floor structure of railway vehicles.

• 국제초고층학회논문집
• /
• 제9권3호
• /
• pp.255-260
• /
• 2020

This research and technology development project is based on the concept and plan of Sumitomo Forestry Co., Ltd., and designed by Nikken Sekkei Ltd., and is aiming to realize 350 m supertall timber-framed buildings in urban areas by 2041, the 350 year anniversary of Sumitomo Forestry's founding(Fig. 1). By constructing office-based multi-use buildings which have 70 stories above ground with GFA of 455,000 ㎡, using a huge amount of timber of 185,000 ㎥, this project envisions to connect forests and cities, and to solve the problems in both of forests and cities. At the present stage, the main objective is to identify the issues related to wood, such as building structural systems, construction methods, materials used, and resource development, and to create a roadmap for future technologies to be researched and developed.

• 한국가구학회지
• /
• 제13권2호
• /
• pp.11-18
• /
• 2002

This study was carried out to investigate the strength and technical feasibility of glulam from small diameter Pinus densiflora and Larix kaempferi. Small diameter logs are currently not used in structural laminated beam construction, but it is suggested that its properties may be feasible for this purpose. The glulam combinations were designed with high grade laminae located at outer laminations (face) and low grade laminae located at center laminations. Important problems of finger jointed glulam as a structural beam are the small modulus of rupture (MOR). One solution for this problem Mi to use veneer and solid wood as the face laminae. The MOE values were predicted for each beam from laminae. The results showed that actual beam MOE values exceeded slightly the predicted values. Based on the evaluation and analysis of Pinus and Larix glulam, the maximum load of Larix kaempferi glulam indicated large values. The bending properties of A and E types glulam were superior to others. It is suggested that this small diameter log can be a candidate for structural glulam construction, providing the proper combinations of face laminae.

• Journal of Microbiology
• /
• 제45권6호
• /
• pp.485-491
• /
• 2007

The effects of biological pretreatment on the Japanese red pine Pinus densiflora, was evaluated after exposure to three white rot fungi Ceriporia lacerata, Stereum hirsutum, and Polyporus brumalis. Change in chemical composition, structural modification, and their susceptibility to enzymatic saccharification in the degraded wood were analyzed. Of the three white rot fungi tested, S. hirsutum selectively degraded the lignin of this sortwood rather than the holocellulose component. After eight weeks of pretreatment with S. hirsutum, total weight loss was 10.7%, while lignin loss was the highest at 14.52% among the tested samples. However, holocellulose loss was lower at 7.81 % compared to those of C. lacerata and P. brumalis. Extracelluar enzymes from S. hirsutum showed higher activity of ligninase and lower activity of cellulase than those from other white rot fungi. Thus, total weight loss and changes in chemical composition of the Japanese red pine was well correlated with the enzyme activities related with lignin- and cellulose degradation in these fungi. Based on the data obtained from analysis of physical characterization of degraded wood by X-ray Diffractometry (XRD) and pore size distribution, S. hirsutum was considered as an effective potential fungus for biological pretreatment. In particular, the increase of available pore size of over 120 nm in pretreated wood powder with S. hirsutum made enzymes accessible for further enzymatic saccharification. When Japanese red pine chips treated with S. hirsutum were enzymatically saccharified using commercial enzymes (Cellulclast 1.5 L and Novozyme 188), sugar yield was greatly increased (21.01 %) compared to non-pre treated control samples, indicating that white rot fungus S. hirsutum provides an effective process in increasing sugar yield from woody biomass.

• Journal of the Korean Wood Science and Technology
• /
• 제10권2호
• /
• pp.12-21
• /
• 1982

Red pine and Japanese larch (Larix leptolepis Gordon) grown in Korea have been the main species of coniferous resources in Korea. Especially, planting area of Japanese larch has been increased continueously in the recent years due to its superior plant type and rapid growth rate and its stocks reached approximately 4.32 million cubic meters at the present time. Although many research works have been done for the utilization of the larch wood in various ways, still many problems are existed in its chemical applications due to a large proportion of soluble extractives. In this study, chemical composition of larch extractives and chemical structure of its major component were analyzed. In order to identify the basic structure of major component, gas-liquid chromatography for separation of some completely methylated alditols as their acetates on a 3% - ECNSS-M on Gas Chrom Q. column was used. Proportion of extractives of Japanese larch wood was higher than that of other conifers and major component of the soluble extractives was arabinogalactan, a schematic structural formula which was presented in Figure 2. The molar ratio of arabinose and galactose was 1:4.5. The main chain of arabinogalactan was composed of 1,3 linked ${\beta}$-D-galactopyranose residues, each of which carried a side chain, attached to the C-6 positions. The exact nature of all of the side chains is not known, but the majority of these side chain was composed of 1, 6 linked ${\beta}$-D-galactopyranose residues, with 2~3 such units present per average chain. Some of the galactose units in the main chain had a residue of 3 - 0 - ${\beta}$-L-arabinopyranosyl-L-arabinofuranose. In addition, a few terminal residues of D-glucuronic acid also was confirmed, attached to C-6 position of the D-galactopyranose residue. It could concluded that the main structure of highly branched arabinogalactan from Japanese larch extractive was essentially the same as those of the other larch species.