Browse > Article
http://dx.doi.org/10.5658/WOOD.2018.46.3.213

Bonding Properties and Resin Exudation Characteristics of Pitch Pine  

Roh, JeongKwan (Department of Interior Materials Engineering, Gyeongnam National University of Science Technology)
Kim, Yun Geun (Gyeongnam Oriental Medicinal Herb Institute)
Publication Information
Journal of the Korean Wood Science and Technology / v.46, no.3, 2018 , pp. 213-220 More about this Journal
Abstract
In order to use Pitch pine (Pinus rigida Miller) as the material of the structural glued laminated timber, the effect of the amount of resin exudation due to storage time after the planning and the knot of the lamina were evaluated on the bonding properties of the glued board with resorcinol resin. For Pitch pine that was dried at high temperature ($120{\sim}95^{\circ}C$) and low temperature ($65{\sim}50^{\circ}C$), the flat sawn(tangential section) showed higher amount of resin exudation than the quarter sawn(radial section). And the low temperature drying wood showed higher resin exudation than the high temperature drying wood. The low and high temperature drying wood showed the highest amount of resin exudation on the 3rd day and 7th day, respectively and they were gradually decreased. However, there were no significant differences from 15 to 90 days. Adhesion performances were low until 2~3 days with high exudation of resin, but there were no significant differences after 15 days. Both high temperature and low temperature drying woods satisfied the Korean standard regardless of the storage time. The adhesive strengths of the laminating parts including knots were higher than those of KS criteria, but the wood failures were not satisfied the KS standard. Adhesive performances according to the laminating combinations (quarter sawn + quarter sawn, flat sawn + flat sawn, quarter sawn + flat sawn) were better than those of KS criteria in all laminating combinations in both high temperature and low temperature drying woods.
Keywords
Pitch pine; resin exudation; resorcinol adhesive; bonding properties; knot;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Kim, K.M., Eom, C.D., Lee, S.J. 2011. Performance of structural glulam lalminated with CuAz-3 preservative treated lumber. Journal of the Korean Wood Science and Technology 39(6): 521-530.   DOI
2 Kim, K.M., Shim, K.B., Kim. B.N. 2010. Bending behavior of preservative treated Pitch pine stress-laminated timber. Journal of the Korean Wood Science and Technology 38(4): 306-315.   DOI
3 Kim, K.M., Shim, K.B., Park, J.S., Kim, W.S., Lim, J.A., Yeo, H.M. 2007. Development of Pitch pine glued laminated timber for structural use. - Improvement of bending capacity of Pitch pine glulam by using domestic larch laminars-. Journal of the Korean Wood Science and Technology 35(6): 13-22.
4 Kim, S.J., Lee, S.S., Baek, Y.C., Kim, Y.S., Park, M.J., Ahn, B.J., Cho, S.T., Choi, D.H. 2015. Manufacturing and feed value evaluation of wood-based roughage using lumber from thinning of Oak and Pitch Pine. Journal of the Korean Wood Science and Technology 43(6): 851-860.   DOI
5 Korea Forest Service. 2017. Statistical yearbook of forestry 2017. Vol. 47.
6 KS F 3021. 2013. Structural glued laminated timber. Korean Agency for Technology and Standards.
7 Seo, J.W., Lee, E.S., Kang, C.Y., Kim, S.B., Yoon, Y.H., Park, H. 2015. Comparison of quality characteristics of woodpellet manufactured from Pinus densiflora S. et Z. and Pinus rigida Mill. Journal of the Korean Wood Science and Technology. 43(3): 374-380.   DOI
8 Shim, S.R., Yeo, H.M. 2004. Visual log grading and evaluation of lamina yield for manufacturing structural glued laminated timber of Pitch pine. Journal of the Korean Wood Science and Technology 32(2): 90-95.
9 Son, W.L., Park, J.S., Kim, K.M. 2014. Life Cycle Assessment of Timber Arch-Truss Bridge by Using Domestic Pinus rigida Glued-Laminated Timber. Journal of the Korean Wood Science and Technology 42(1): 1-12.   DOI
10 Wi, H., Seo, B.S. 1979. Study on oleoresin exudation in Pinus rigida(I). Theses Collection of the Agricultural College 10: 49-55. 1981. 12:41-45.
11 Yang, I., Kim, S.H., Han, G.S. 2015. Effects of moisture content and particle size of sawdust and operating time of flat-die pelletizer on the fuel characteristics of wood pellets fabricated with Mongolian oak and Rigida pine sawdust. New & Renewable Energy 11(3): 11-20.   DOI
12 Yeo, H.M., Shim, S.R. 2004. High temperature drying of Pitch pine lumber. Journal of the Korean Wood Science and Technology 32(4): 46-51.