• Title/Summary/Keyword: structural materials

검색결과 5,861건 처리시간 0.038초

Co-sputtered $HfO_2-Al_2O_3$을 게이트 절연막으로 적용한 IZO 기반 Oxide-TFT 소자의 성능 향상 (Enhanced Device Performance of IZO-based oxide-TFTs with Co-sputtered $HfO_2-Al_2O_3$ Gate Dielectrics)

  • 손희근;양정일;조동규;우상현;이동희;이문석
    • 대한전자공학회논문지SD
    • /
    • 제48권6호
    • /
    • pp.1-6
    • /
    • 2011
  • 투명 산화물 반도체 (Transparent Oxide-TFT)를 활성층과 소스/드레인, 게이트 전극층으로 동시에 사용한 비결정 indium zinc oxide (a-IZO), 절연층으로 co-sputtered $HfO_2-Al_2O_3$ (HfAIO)을 적용하여 실온에서 RF-magnetron 스퍼터 공정에 의해 제작하였다. TFT의 게이트 절연막으로써 $HfO_2$ 는 그 높은 유전상수( > 20)에도 불구하고 미세결정구조와 작은 에너지 밴드갭 (5.31eV) 으로 부터 기인한 거친계면특성, 높은 누설전류의 단점을 가지고 있다. 본 연구에서는, 어떠한 추가적인 열처리 공정 없이 co-sputtering에 의해 $HfO_2$$Al_2O_3$를 동시에 증착함으로써 구조적, 전기적 특성이 TFT 의 절연막으로 더욱 적합하게 향상되어진 $HfO_2$ 박막의 변화를 x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE)를 통해 분석하였다. XRD 분석은 기존 $HfO_2$ 의 미세결정 구조가 $Al_2O_3$와의 co-sputter에 의해 비결정 구조로 변한 것을 확인 시켜 주었고, AFM 분석을 통해 $HfO_2$ 의 표면 거칠기를 비교할 수 있는 RMS 값이 2.979 nm 인 것에 반해 HfAIO의 경우 0.490 nm로 향상된 것을 확인하였다. 또한 SE 분석을 통해 $HfO_2$ 의 에너지 밴드 갭 5.17 eV 이 HfAIO 의 에너지 밴드 갭 5.42 eV 로 향상 되어진 것을 알 수 있었다. 자유 전자 농도와 그에 따른 비저항도를 적절하게 조절한 활성층/전극층 으로써의 IZO 물질과 게이트 절연층으로써 co-sputtered HfAIO를 적용하여 제작한 Oxide-TFT 의 전기적 특성은 이동도 $10cm^2/V{\cdot}s$이상, 문턱전압 2 V 이하, 전류점멸비 $10^5$ 이상, 최대 전류량 2 mA 이상을 보여주었다.

수열합성법으로 성장된 산화아연 나노막대의 특성 및 열처리 효과 (Annealing Effects on Properties of ZnO Nanorods Grown by Hydrothermal Method)

  • 전수민;김민수;김군식;조민영;최현영;임광국;김형근;이동율;김진수;김종수;이주인;임재영
    • 한국진공학회지
    • /
    • 제19권4호
    • /
    • pp.293-299
    • /
    • 2010
  • 수열합성법으로 실리콘 (111) 기판 위에 산화아연 나노막대를 성장하였다. 산화아연 나노막대를 성장하기 전, 실리콘 기판에 스핀코팅법으로 씨앗층을 성장하였다. 산화아연 나노막대는 오토클레이브(autoclave)로 $140^{\circ}C$에서 6시간 동안 성장하였고, 아르곤 분위기에서 300, 500, $700^{\circ}C$의 온도로 20분 동안 열처리하였다. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL)를 이용하여 열처리한 산화아연 나노막대의 구조적, 광학적 특성을 분석하였다. 모든 산화아연 나노막대 시료에서 c-축 배향성을 나타내는 강한 ZnO (002) 회절 피크와 약한 ZnO (004) 회절 피크가 나타났다. 열처리 온도가 증가함에 따라 산화아연 나노로드의 residual stress는 compressive에서 tensile로 변하였다. Hexagonal 형태의 산화아연 나노로드를 관찰하였다. 산화아연 나노로드의 PL 스펙트럼은 free-exciton recombination에 의해 3.2 eV에서 좁은 near-band-edge emission (NBE) 피크와 산화아연 나노막대의 결함에 의해 2.12~1.96 eV에서 넓은 deep-level emission (DLE) 피크가 나타났다. 산화아연 나노막대를 열처리함에 따라, NBE 피크의 세기는 감소하였고 DLE 피크는 열처리에 의해 발생한 산소 관련 결함에 의하여 적색편이 하였다.

PREPARATION OF AMORPHOUS CARBON NITRIDE FILMS AND DLC FILMS BY SHIELDED ARC ION PLATING AND THEIR TRIBOLOGICAL PROPERTIES

  • Takai, Osamu
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2000년도 추계학술발표회 초록집
    • /
    • pp.3-4
    • /
    • 2000
  • Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

  • PDF

유아숲체험장의 이용후 평가 (Post Occupancy Evaluation of the Forest Experience Centers for Children)

  • 강태순;이명우;정문선
    • 한국조경학회지
    • /
    • 제45권2호
    • /
    • pp.109-123
    • /
    • 2017
  • 숲공간이 갖는 유아발달의 긍정적인 영향으로 다양한 사업주체에 의해 숲활동공간의 조성과 운영이 양적으로 증가하고 있으나, 실제적인 공간설계 및 운영프로그램에 관한 연구는 미흡한 실정이다. 따라서 본 연구의 목적은 숲활동에 참여한 교사와 유아를 대상으로 이용후 평가를 실시하여 유아숲체험장의 공간 및 운영프로그램을 평가하는데 있다. 이를 위해 서울시 유아숲체험장 12개소를 대상으로 현장조사, 수업참관, 숲교육 전문가 인터뷰를 통한 현황분석과 115명의 산림교육전문가 및 보육교사들에게 중요도, 성취도, 전반적 만족도, 공간선호도 설문조사를 하였다. 또한 29명의 유아를 대상으로 면담법, 사진 시뮬레이션, 유아용 설문지를 사용하여 전반적 만족도와 공간선호도를 파악하였다. 중요도 및 성취도 분석결과, 운영프로그램특성 영역이 공간특성 영역보다 높게 평가되었고, 구조적 프로그램의 적용 여부를 바탕으로 구분한 집단간 비교에서 적극적인 적용 그룹이 소극적/자유놀이 그룹보다 두 영역 모두를 높게 평가하였다. 유아설문결과는 구조적 프로그램을 적용한 유아들은 시설공간을, 자유놀이 중심의 유아들은 자연공간을 선호하였으며, 두 집단 모두 숲활동에 대해 '만족'하였다. 이를 바탕으로 1) 숲활동공간의 조성은 접근성, 안전성, 경사다양성, 수공간을 확보하고, 숲길로서 연결될 수 있게 하며, 다양한 지형과 수목 및 자연재료를 확보하도록 한다. 2) 운영 프로그램은 숲활동 프로그램을 체계적인 운영과 구조적 프로그램 및 자유놀이의 비율이 편향되지 않도록 한다. 또한 자유놀이시간의 충분한 확보와 숲속 공간에서의 놀이 점유율이 높은 운영 프로그램을 계획한다. 3) 산림교육전문가의 역할과 전문성을 확보하여 유아의 자율성을 높일 수 있는 프로그램을 운영하도록 한다.

활하중이 작용하는 해안도로 하부 연성지중구조물의 거동 분석 (Structural Behavior of the Buried flexible Conduits in Coastal Roads Under the Live Load)

  • 조성민;장용채
    • 한국항해항만학회지
    • /
    • 제26권3호
    • /
    • pp.323-328
    • /
    • 2002
  • 강판벽체와 뒷채움 지반의 상호작용에 의해 외력을 지지하는 지중강판구조물은 도로 제방의 하부 통·수로 구조물로 널리 사용되고 있다. 해안도로로 사용되는 성토체 내에 통로용 횡단구조물로 설치한 직경 6.25m의 원형단면 지중강판구조물에 대하여 상부 도로의 차량 통행에 의한 활하중 작용시 강판 벽체의 축력과 모멘트 변화를 평가하고, 토목섬유에 의한 강판구조물 상부 지반의 보강효과를 검증하였다. 이를 위하여 실제 구조물을 대상으로 정적 및 동적 차량재하시험을 실시하고, 구조물 내에 발생하는 축력과 모멘트, 그리고 구조물에 작용하는 토압을 계측하였으며 그 결과를 각각 분석하였다. 또한 지오그리드를 이용한 토피부 보강 효과에 대해서도 검증하였다. 차량하중 작용시 강판 부재의 축력은 주로 상부 아치부에서 증가하였으며, 그 최대값은 구조물 정점부 또는 도관 어깨부에서 발생하였다. 모멘트도 상부 아치부를 중심으로 증가하는 형태를 보였으나, 그 크기는 무시할 수 있을 만큼 작았다. 정적차량하중이 가해질 때 토피부에 지오그리드를 포설한 단면에서 계측된 최대축력 증가량은 지오그리드가 설치되지 않은 단면에서 계측된 값의 85∼92%를 나타내어 사하중에 대한 효과 외에 추가적인 축력감소 효과를 확인할 수 있었으나 차량주행시에는 차량하중에 대한 추가적인 보강 효과는 없어짐을 관찰하였다. 동적재하시험을 통해 산정한 충격계수 (DLA)는 토피두께가 0.9m에서 1.5m까지 증가함에 따라 반비례하여 감소하였는데, 그 크기는 CHBDC 방법으로 예측한 값보다 1.2-1.4배 정도 크게 나타났다.

단일 절삭가공용 왁스 디스크 내에서 순차적 절삭가공 순서에 따른 크라운의 내면 및 변연 적합도 비교 (Comparison of internal and marginal fit of crown according to milling order in a single machinable wax disc)

  • 송준범;이종혁;하승룡;최유성
    • 대한치과보철학회지
    • /
    • 제59권4호
    • /
    • pp.395-404
    • /
    • 2021
  • 목적: 본 연구의 목적은 절삭가공이 순차적으로 진행됨에 따른 왁스 디스크의 구조적 안정성의 변화가 보철물의 적합도에 미치는 영향을 평가하는 것이다. 재료 및 방법: 삭제된 상악 제1대구치 인공치아를 이용하여 Ni-Cr 합금 표준모형을 제작하였고, 이를 스캔하여 크라운을 디자인한 뒤 왁스 디스크를 절삭가공하고 매몰 및 Ni-Cr 합금으로 주조하여 보철물을 제작하였다. 단일 왁스 디스크 내에서 중앙에 일렬로 위치한 납형들은 가장 처음 절삭가공 되는 WM1군부터 마지막에 절삭가공 되는 WM5군으로 총 5개의 군을 설정하였고 각 군의 수는 10개로 하였다. 적합도는 실리콘 레플리카 방법을 이용하여 변연 간극, 축면 간극, 선각간극, 교합면 간극을 측정하였다. 측정값은 일원배치분산분석(one-way ANOVA)을 사용하여 유의 수준은 95%로 그룹 간의 차이를 평가한 뒤, 사후 분석을 위해 Tukey HSD test를 시행하였다(α = .05). 결과: 각 군의 변연 간극은 WM1군(40.41 ± 2.15 ㎛), WM2군(40.44 ± 2.23 ㎛), WM3군(39.96 ± 2.25 ㎛), WM4군(39.96 ± 2.48 ㎛), WM5군(40.57 ± 2.53 ㎛)으로 각 군간에 유의한 차이를 보이지 않았다. 축면 간극, 선각 간극, 교합면 간극에서도 각 군간에 유의한 차이를 보이지 않았다. 결론: 단일 절삭가공용 왁스 디스크 내에서 순차적 절삭가공 시 크라운의 내면 및 변연 적합도는 절삭 순서에 영향 받지 않는 것으로 보인다.

역할 창조를 위한 '몸틀(body schema)' 형성 연구 (A Study on Forming 'Body Schema' for Role Creating)

  • 송효숙
    • 한국연극학
    • /
    • 제52호
    • /
    • pp.319-357
    • /
    • 2014
  • Formation of 'body schema' is the start for actor to create role and becomes the root and the foundation of existing as a role on the stage. For this, an actor needs to form 'scheme of role' with escaping from own 'body schema.' 'Schema of role' is formed by acquiring through synthesizing daily basic actions, namely, walking, standing, sitting, hand stretching, bending, and touching. The body schema, which was made with simple and usual actions, has fundamental significance in a sense of becoming the body in which the past traces in a role are habituated while energy as a role flows. As for the process of forming body schema, an actor first needs to obtain the visualized materials like photo, magazine, picture and image available for seeing a role specifically and clearly based on what analyzed a character. An actor needs to have three-dimensional image available for always recalling it in the head during acting. To do this, image data available for fundamentally capturing routine actions along with body structure are still more useful. Next, the body schema is formed by interaction with environment. Thus, there is a need of passing through the two-time process of forming body schema. Firstly, the body schema is made on routine actions in a role as physical condition of a role in actor's own everyday life. Secondly, the body schema is made on routine actions available for moving efficiently and economically in line with the environment of performance. A theatrical stage is the temporal space of rhythm and rule different from routine space. What forms body schema immediately in the second phase without body schema in the first phase ultimately becomes what exists as actor's own body, not the body of a role. The body schema, which was formed as the second process, is what truly has identity as a role in the ontological aspect, comes to experience the oppositional force in muscle, a qualitative change in energy, and emotional agitation in the physical aspect, and experiences perception, thinking, volition, and even consciousness with the entire body in the cognitive dimension. Thus, the formation of body schema can be known to be just a method of changing even spiritual and emotional layer. Body schema cannot be made if there is no process of embodiment and habit. Embodiment and habit are not simply the repeated, empty and mechanical action in the body. But, habit itself has very important meanings for forming body schema for role creating. First, habit allows the body itself to learn and understand a meaning. Second, habit relies upon environment, thereby allowing an actor of making the habituated body schema to recognize environment. Third, habit makes the mind. The habituated body schema is just the mind and the ego of a person who possesses the body schema. Fourth, habit comes to experience the expansion in energy and the expansion in existence. It may be experienced through interrelation among actor's body, tool, and environment. Fifth, habit makes identity of the body. Hence, this just becomes what secures identity of a role. These implications of habit are the formation of body schema, which is maintained with the body of being remembered firmly through being closely connected with the process of neural adaptation. Finally, it sought for possibility of practice as one method of forming body schema for role creating through Deleuze's '-becoming' theory. As 'actual animal-becoming' is real '-becoming' of forming structural transformation in the physical dimension, it meets with what the formation of body schema pursues actuality and reality. This was explained with a concept as saying of 'all '-becoming' molecular' by Deleuze/Guattari. 'Animal of having imitated animal's characteristic- becoming' is formed by which the body schema relies upon environment. In this way, relationship among the body, tool and environment has influence even upon a change in consciousness, thinking, and emotion, thereby being able to be useful for forming body schema in a sense of possibly experiencing ultimately expansion in role, namely, expansion in existence.

검무 구조 분석 시론 - 문헌과 음악을 중심으로 - (The Structural Analysis and Criticism of Geommu (Korean Sword Dance) - Focusing in Literary Works and Music -)

  • 김영희
    • 공연문화연구
    • /
    • 제34호
    • /
    • pp.9-42
    • /
    • 2017
  • 한국의 검무는 조선시대까지 의례, 민속예능, 궁중연향, 풍류 등에서 다양하게 추어졌다. 그 중 기생들이 민간과 궁중에서 추었던 여기(女妓) 검무가 현재까지 전승되었는데, 조선 후기 문학작품들에 기록된 검무들은 현행 검무보다 역동적이고 검기(劍氣)를 가득 담은 춤이었다. 하지만 현재 전승되고 있는 기녀 검무들은 의식(儀式)성이 강하고 단아하다. 시대적 변화를 겪으며 검무의 정조(情調)가 변한 듯하다. 그러나 이러한 차이에도 불구하고 시대를 관통하는 검무의 핵심적인 구조가 있을 것이라는 가설 하에 검무의 내적 구조를 시론적으로 분석해 보았다. 이를 위해 현행 검무와 조선 후기 검무의 구조를 교차하여 연구하였다. 조선후기 문학작품 중 박제가의 <검무기>와 정약용의 <무검편증미인>을 분석했고, 무보로 "정재무도홀기"에서 <검기무>와 "교방가요"의 <검무>를 분석하였다. 도입과정에서는 춤꾼이 등장하여 절을 하고 춤꾼의 캐릭터를 보여주고, 무진 무퇴하며 손춤이나 한삼춤을 춘다. 전개과정에서는 춤꾼과 검이 만나는데, 검을 잡을 것인지를 갈등하다가 양 손에 칼을 잡고 춤춘다. 절정과정에서 숙련된 검술과 교전(交戰)의 모습을 보여주고, 마지막에 연풍대까지 춘다. 결말과정에서는 궁중에서 추었던 경우 인사를 하고 마치지만, 교방에서 추었던 경우 칼을 던지고 춤을 마무리한다. 검무의 구조를 도입 - 전개 - 절정 - 결말로 구분하였다. 이러한 네 단계의 전개 구조에 현행 검무(진주검무, 통영검무, 해주검무, 호남검무, 국립국악원의 검기무)의 춤사위 진행을 결부시키고, 반주 장단인 염불 - 타령(또는 늦은타령) - 자진타령 - 타령 - 자진타령의 순서에 따라 검무의 전개를 분석해보았다. 도입과정은 염불이나 타령의 초입부분이다. 기생이 등장하면서 캐릭터가 제시되고, 2열로 나뉘어 상대(相對)하며 춤춘다. 염불과 타령의 도입과정은 여유롭고 우아하게 진행된다. 전개과정은 타령의 중간이나 자진타령에 해당한다. 춤꾼들이 검 앞에 앉아 있거나 앉게 되는데, 칼을 잡기(집검(執劍))까지 갈등의 과정이 보여지다가, 결국 쌍검을 잡고 춤춘다. 타령에서 자진타령 장단으로 속도를 점차 높이며 검을 잡는 과정의 갈등과 긴장감을 고조시킨다. 또 자진타령의 탄력 있는 장단이 춤의 전개를 조금씩 진전시키는 역할을 하게 된다. 그런데 속도를 갑자기 늦추어 타령장단이 3~4장단 배치되었다. 자진타령의 빠른 장단에서 타령의 느린 장단으로 전환되는데, 그 이유는 검무의 진전되는 긴장감을 잠시 끌어내 숨을 고르게 했다가, 다시 속도를 높여서, 이 춤이 절정으로 가기 전에 검무의 묘미를 높이는 효과를 만드는 것이라고 하겠다. 그리고 다시 자진타령으로 속도가 빨라지면 검무의 동작들은 더욱 폭이 크고 역동적으로 펼쳐진다. 고조된 자진타령의 빠르고 힘 있는 장단에 맞춰 추면서 절정과정의 최고조에 이르는 것이다. 마지막 결말은 잦은 타령이 고조되고, 연풍대의 여세를 몰아 일렬로 서서 검을 휘두르며 춤추다가, 인사를 하고 춤을 마친다. 여기까지 자진타령이 이어진다. 이상 검무의 전개 과정에서 염불 - 타령 - 자진타령 - 타령 - 자진타령으로 이어지는 반주음악은 검무의 도입, 전개, 절정, 결말이라는 구조와 긴밀히 연관되어 있고, 각 과정을 선명히 드러내는 역할을 하고 있다. 조선후기 문헌에 기록된 기녀들의 검무와 현행 검무가 진행상에 약간의 차이를 보이지만, 시대를 관통하는 검무의 핵심적인 내적 구조를 파악할 수 있다.

탄화규소섬유와 탄소섬유 하이브리드 직물을 강화재로 한 SiC 매트릭스 세라믹복합재의 기계적물성, 산화 및 삭마 저항성 개선 연구 (Study on Improvement of Mechanical Property, Oxidation and Erosion Resistance of SiC Matrix Ceramic Composites Reinforced by Hybrid Fabric Composed of SiC and Carbon Fiber)

  • 윤병일;김명주;김재성;권향주;윤성태;김정일
    • Composites Research
    • /
    • 제32권3호
    • /
    • pp.148-157
    • /
    • 2019
  • 본 연구에서는 탄소섬유, 탄화규소섬유 그리고 하이브리드섬유를 강화재로 하여 TGCVI와 PIP 혼합 공정으로 $C_f/SiC$, $SiC_f/SiC$, $C_f-SiC_f/SiC$의 세라믹복합재를 제조하였다. 열충격싸이클시험, 3점 굴곡시험과 Oxy-Acetylene 토취 시험후에 그들의 기계적물성, 산화저항성과 내삭마성을 평가하였다. $C_f/SiC$복합재는 온도 증가에 따라서 기계적물성의 감소와 준 연성의 파단모드, 그리고 높은 삭마량을 보였다. $SiC_f/SiC$복합재는 $C_f/SiC$ 복합재에 비하여 강한 기계적물성, 낮은 삭마량을 그리고 취성의 파단모드를 나타냈다. 한편 하이브리드 복합재는 가장 우수한 기계적물성과 $SiC_f/SiC$보다는 연성의 파단모드 그리고 $C_f/SiC$ 보다 낮은 삭마량의 결과를 나타냈다. Oxy-Acetylene 토취 시험 중에 SiC매트릭스는 산화되어 $SiO_2$층을 형성하였으며, 특히 이 층은 $C_f-SiC_f/SiC$$SiC_f/SiC$ 복합재에서 섬유의 추가적인 삭마를 막는 역할을 하는 것으로 나타났다. 결론적으로 낮은 기공율을 갖는 하이브리드 복합재를 제조한다면, $C_f/SiC$의 산화로 인한 기계적물성의 감소와 $SiC_f/SiC$ 복합재의 취성 파단모드의 개선으로 고온 산화분위기에서 고온열구조재로의 적용이 높을 것으로 기대한다.

지리산 불일폭포 일원의 화강암질편마암에 발달한 슈도타킬라이트: 산상과 특성 (Pseudotachylyte Developed in Granitic Gneiss around the Bulil Waterfall in the Jirisan, SE Korea: Its Occurrence and Characteristics)

  • 강희철;김창민;한래희;류충렬;손문;이상원
    • 암석학회지
    • /
    • 제28권3호
    • /
    • pp.157-169
    • /
    • 2019
  • 경상남도 하동군 화개면 지리산 불일폭포에 분포하는 선캄브리아시대 고원생대의 화강암질편마암 노두에서 관찰되는 중생대 백악기 이후에 형성된 것으로 추정되는 슈도타킬라이트를 대상으로 야외 산상과 구조지질학적 특성, 암석기재, 전자현미경 관찰, 지화학적 분석 등을 수행하였다. 연구지역 노두에서 동일한 전단영역에 발달한 취성변형작용의 산물인 단층암은 슈도타킬라이트와 엽리상 파쇄암으로 분류된다. 이들 중에서 단층작용에 수반된 암회색 슈도타킬라이트들의 산출형태는 수 mm~수 cm 단위의 두께로 단층면을 따라 발달한 '단층세맥형'과 단층세맥형의 슈도타킬라이트로부터 그 용융물이 주변암에 주입되어 형성된 '주입세맥형'으로 구분된다. 이들 슈도타킬라이트의 암석 슬랩과 박편에서는 유리질 내지 탈유리화된 기질부에 석영, 알칼리장석, 사장석, 흑운모 등 잔류광물들의 쇄설성 조직, 만입경계가 발달한 반정, 반응연, 산화물의 물방울 모양구조, 행인상구조, 빠른 냉각으로 형성된 유리, 유동구조 등이 관찰된다. 또한, 슈도타킬라이트의 주성분 및 광물의 조성은 일반적인 염기성 암맥과 달리 모암인 화강암질편마암의 조성과 거의 동일하게 나타난다. 이상의 관찰과 분석은 아주 천처에서 고속 미끌림의 지진성 단층운동으로 발생한 마찰열로부터 모암의 마모와 선별적인 용융의 결과로 생성된 슈도타킬라이트임을 지시한다. 본 연구에서 완전히 규명하지 못한 슈도타킬라이트의 명확한 생성연대, 생성 온도와 깊이, 운동학적 특성과 관련한 단층의 변위와 길이, 단층 미끌림 속도 등에 관해서는 후속연구로부터 밝힐 예정이다.