• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.149-158
• /
• 2007

본 연구는 산업부산물인 폐타이어인 #30 체를 거의 다 통과한 CRM 입자를 아스팔트 콘크리트 혼합물의 개질재로서 8%, 10%, 12%를 각각 습식 및 건식방법의 CRM 개질아스팔트 혼합물에 대하여 동결융해에 의한 수분취약성 시험을 통하여 동결융해저항성을 평가하였다. 건식 및 습식방법에 의한 CRM 개질아스팔트 혼합물의 배합설계를 통하여 최적아스팔트 함량을 결정하였고. OAC로 제조한 CRM 개질 혼합물은 반복주행시험과 수분취약성시험을 수행하였다. 그 결과, CRM 개질아스팔트 혼합물의 소성변형 저항성은 일반 AP-5 혼합물보다 우수하게 나타났다. 그러나 수분취약성시험에 의한 동결융해 저항성이 상당히 낮게 나타나 동결융해에 의한 수분취약성에 아주 민감한 것으로 나타났다. 반면에, CRM 개질아스팔트 혼합물에 박리저감제의 첨가는 동결융해에 의한 수분취약성에 대한 저항성을 상당히 향상시키는 것으로 나타났다. 따라서 국내에서 CRM 개질아스팔트 혼합물을 사용할 때에는 반드시 수분취약성에 대한 동결융해저항성에 대한 예방책이 제시된 혼합물을 사용될 것이 권장된다.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.77-87
• /
• 2015

PURPOSES: It is theoretically well known all over the world, that porous hot mixed asphalt (HMA) with hydrated Lime improves moisture and rutting resistance, and reduces pothole occurrence frequency, as well as the life cycle cost (LCC). METHODS : Addictive in the two different formations of the liquid anti-stripping Agent and powder Hydrated-Lime was applied in this investigation in order to obtain relatively clear results according to their types and conditions. Firstly, the moisture conditions were set, and applied to the porous HMA mixtures with hydrated lime (anti-stripping agent). Next, it was followed by a non-destructive test with the application of three freeze-thaw cycles, which were individually carried out thrice to compare the results of the dynamic moduli. Lastly, the hydrated lime effect related to moisture sensibility to porous HMA has been verified through the analysis of the modulus results regarding the change rate of dynamic modulus per n-cycle. RESULTS: It is clear from this investigation, that the dynamic modulus is inversely proportional to the change in temperature, as the graph representing the rigidity of the thermorheologically simple (TRS) material showed gradual decline of the dynamic modulus with the increase in temperature. CONCLUSIONS: The porous HMA mixture with the anti-stripping agent (hydrated Lime) has been found to be more moisture resistant to freezing and thawing than the normal porous HMA mixture. It is clear that the hydrated lime helps the HMA mixture to improve its fatigue resistance.

• 한국농공학회지
• /
• 제32권E호
• /
• pp.67-73
• /
• 1990

Many distress mechanisms in pavement are known to be caused by the poor mechanical properties of bituminous concretes. Among many mechanical properties, tensile strength is one of the more important indicates that represent the resistance of pavement to traffic loading. However, there has been no relationship established between the strength and distress mechanisms. Therefore, this study was conducted to evaluate a correlation between the tensile strength value and the intensity of distress in bituminous concrete. Distress data were collected from an extensive field investigation over 77km of a four-lane highway in South Carolina, USA, and from laboratory prepared specimens in two phases of study. Strength data were obtained from a total of more than 400 field cores taken from the same highway and from 640marshall specimens of surface course mixture prepared in the laboratory. These data were analyzed using statistical test techniques. It was found from statistical analyses that the tensile strength of bituminous concrete had a strong relation with the pavement condition in the field. In the analysis of rutting and stripping, low strength concrete showed a higher distress rate in the mixture, and mixtures under distress in the field showed obviously reduced strength values. Stripping was found to be the most significant distress mechanism that was correlated with low strength bituminous concrete. Rutting appeared more frequently in a low strength pavement section of the highway as a sign of failure due to traffic loading.

• 한국도로학회논문집
• /
• 제3권4호
• /
• pp.105-116
• /
• 2001

본 연구는 주물고사를 이용한 아스팔트 콘크리트와 주물고사의 물리적 화학적 특성을 비교 분석하는 것이다. 주물고사의 아스팔트 콘크리트 적용성을 평가하기 위하여 XRF, SEM, 제타전위를 측정하여 주물고사의 물리 화학적 특성을 알아보았다. 주물고사 아스팔트 콘크리트의 박리저항성을 향상시키기 위하여 박리방지제(소석회(Hydrated lime), 액상박리방지제)를 사용하였다. 그리고 주물고사 아스팔트 콘크리트 혼합물의 인장특성과 내구성 향상을 위하여 LDPE를 사용하였다. 또한 주물고사 아스팔트 콘크리트의 공용성을 알아보기 위하여 간접인장강도, 수분취약성시험, 동결 융해시험, 반복주행시험을 수행하였다. 시험결과 주물고사 아스팔트 콘크리트의 역학적 특성이 일반 아스팔트 콘크리트에 비해 같거나 향상되는 것으로 나타났다. 따라서 주물고사를 아스팔트 콘크리트에 재활용할 수 있다는 결론을 얻었다.

• 한국도로학회논문집
• /
• 제7권3호
• /
• pp.71-78
• /
• 2005

본 연구는 판유리 등의 생산 기초 원료인 소다회 $(Na_2CO_3)$ 생산 과정에서 발생되는 산업 부산물인 부산석회를 아스팔트 혼합물의 채움재로서 재활용 가능성을 검토하여 부산석회의 실질적인 활용 방안을 제시하고자 한다. 이를 위하여 부산석회를 기존의 석회석분 채움재에서 중량 대비 25%, 50%, 75%, 100%로 대체하여 제조한 아스팔트 혼합물에 대해 간접인장강도 시험, 회복탄성계수 시험, 수분 민감성 시험, 반복하중 간접인장 시험, 휠트래킹 시험을 실시하여 부산석회의 채움재 활용 가능성을 파악하였다. 또한 기존 석회석분 채움재를 사용한 아스팔트 혼합물과 소석회 (Hydrated Lime)를 사용한 아스팔트 혼합물의 공학적 특성을 비교 분석하여 부산석회를 재활용한 아스팔트 혼합물의 성능 증진 효과를 평가하고 본 기술의 실용화 가능성을 판단하였다.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.85-95
• /
• 2023

In recent years, solid-state Li metal batteries (SSLBs) have attracted significant attention as the next-generation batteries with high energy and power densities. However, uncontrolled dendrite growth and the resulting pulverization of Li during repeated plating/stripping processes must be addressed for practical applications. Herein, we report a plastic-crystal-based polymer/ceramic composite solid electrolyte (PCCE) to resolve these issues. To fabricate the one-side ceramic-incorporated PCCE (CI-PCCE) film, a mixed precursor solution comprising plastic-crystal-based polymer (succinonitrile, SN) with garnet-structured ceramic (Li₇La₃Zr₂O₁₂, LLZO) particles was infused into a thin cellulose membrane, which was used as a mechanical framework, and subsequently solidified by using UV-irradiation. The CI-PCCE exhibited good flexibility and a high room-temperature ionic conductivity of over 10^-3 S cm^-1. The Li symmetric cell assembled with CI-PCCE provided enhanced durability against Li dendrite penetration through the solid electrolyte (SE) layer than those with LLZO-free PCCEs and exhibited long-term cycling stability (over 200 h) for Li plating/stripping. The enhanced Li⁺ transference number and lower interfacial resistance of CI-PCCE indicate that the ceramic-polymer composite layer in contact with the Li anode enabled the uniform distribution of Li⁺ flux at the interface between the Li metal and CI-PCCE, thereby promoting uniform Li plating/stripping. Consequently, the Li//LiFePO₄ (LFP) full cell constructed with CI-PCCE demonstrated superior rate capability (~120 mAh g^-1 at 2 C) and stable cycle performance (80% after 100 cycles) than those with ceramic-free PCCE.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.501-512
• /
• 2016

High-strength structural bolts have been utilized for beam-to-column connections in steel-framed structural buildings. Failure of these components may be caused by the bolt shank fracture or threads stripping-off, documented in the literature. Furthermore, these structural bolts are galvanized for corrosion resistance or quenched-and-tempered in the manufacturing process. This paper adopted the finite element simulation to demonstrate discrete mechanical performance for these bolts under tensile loading conditions, the coated and uncoated numerical model has been built up for two numerical integration methods: explicit and implicit. Experimental testing and numerical methods can fully approach the failure mechanism of these bolts and their ultimate load capacities. Comparison has also been conducted for two numerical integration methods, demonstrating that the explicit integration procedure is also suitable for solving quasi-static problems. Furthermore, by using precise bolt models in T-Stub, more accurately simulate the mechanical behavior of T-Stub, which will lay the foundation of the mechanical properties of steel bolted joints.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1623-1634
• /
• 2022

A new irradiation loop design has been developed, which provides the ability to carry out radiolytic resistance studies of extraction systems simulating process relevant conditions in an easy and simple way. The step-by-step loop configuration permits an easy modification of settings and has a relative low volume requirement. This irradiation loop has been initially set up to test the main EURO-GANEX process steps: the lanthanide (Ln) and actinide (An) co-extraction followed by the transuranic (TRU) stripping. The performance and changes in the composition have been analyzed during the irradiation experiment by different techniques: gamma spectroscopy and ICP-MS for the extraction and corrosion behavior of the full system, and HPLC-MS and Raman spectroscopy to determine the degradation of the organic and aqueous solvents, respectively. The Ln and An co-extraction step and the corrosion that occurred during the first irradiation step revealed the favorable expected results according to literature. The effects of acidity changes occurred during the irradiation process, the presence of stainless corrosion products in solution as well as the new possible degradation compounds have been explored in the An stripping step. The results obtained demonstrate the importance of developing realistic irradiation experiments where different factors affecting the performance can be easily studied and isolated.

• 한국표면공학회지
• /
• 제25권6호
• /
• pp.309-317
• /
• 1992

Evaluation of electroplated gold has been carried out to obtain the data base for electrical, mechanical and environmental properties for telecommunication component applications. Gold plating was performed to a various thickness of $0.1\mu\textrm{m}$ to 1.$25\mu\textrm{m}$ after Ni plating of $3\mu\textrm{m}$ on C52100 bronze. Electrical properties were evaluated by measuring contact resistance using 4-wire method under static contact and dynamic contact during wear. Reciprocating wear test was performed to study the wear behavior as well as failure of gold contacts. Environmental characteristics were evaluated by using salt spray testing and SO2 test. Hardness of soft gold film was measured to be 53KHN under 5g load. Friction coefficient was initially obtained to be 0.15 and 0.25 under 100g and 200g loads respectively, and then raised up to 0.8 with increasing reciprocating wear cycles. Static contact resistance was 2 to 3m$\Omega$ regardless of gold film thickness while drastic changes of contact resistance were occured upon stripping of the gold film during wear. The lifetime of contact wear showing stable contact resistance increased up to 6 times for $1\mu\textrm{m}$ thickness compared to that of$ 0.1\mu\textrm{m}$ thickness under 100g load. All gold plating appeared to be stable under salt atmosphere while only the gold plating over 1$\mu\textrm{m}$ was stable under SO2 atmosphere.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.17-24
• /
• 2015

PURPOSES : Recently, crack, rutting, and stripping problems from the surface of asphalt pavements in National highway are observed and they affect the drivers to feel uncomfortable on the road. Surface treatments are recommended to use in distressed pavements due to cost-effective, and improvement of surface performance. The purpose of this study is to evaluate the performance of micro-surfacing and polymer slurry seal treatments for distressed asphalt pavements. METHODS : Surface conditions and friction resistance are evaluated for asphalt pavements treated with micro-surfacing and polymer slurry seal mixes in National highway 30 line and 34 line. Visual observation is conducted and surface performance is measured by PES (Performance Evaluation Surveyor) in terms of crack ratio, rutting and IRI(International Roughness Index). BPN(British Pendulum Number) is measured by BPT(British Pendulum Tester) to evaluate the friction resistance in the field. RESULTS : The surface evaluation results are presented for asphalt pavement treated with micro-surfacing and polymer slurry seal treatments in National highway 30 line and 34 line. Based on the visual observation, micro-surfacing and polymer slurry seal treatments show better improvements in terms of cracks and stripping. Based on the surface conditions measured by PES vehicle, the surface performance of micro-surfacing treatments improves from 53.3% to 54.2% and the surface performance of polymer slurry seal treatments improves from 21.6% to 59.7%. However, the friction resistance of both micro-surfacing and polymer slurry seal treatments decreases from 2.5% to 6.7%. Further, it should be verified to produce the surface exposed with aggregates during the construction process of both treatment methods in the field. CONCLUSIONS : Based on the performance evaluation results in the filed, the surface performance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments improves from 21.6% to 59.7%. While, the friction resistance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments does not improve. It can be concluded that current micro-surfacing and polymer slurry seal treatments would improve surface performance but would not improve the friction resistance.