• International Journal of Safety
• /
• v.1 no.1
• /
• pp.36-42
• /
• 2002

This paper is aimed at predicting the life of rubber insulating gloves under normal operating stresses from relatively rapid test performed at higher stresses. Specimens of rubber insulating gloves are subject to multiple stress conditions, i.e. combined electrical and thermal stresses. Two modes of electrical stress, step voltage stress and constant voltage stress are used in specimen aging. There are two types of test for electrical stress in this experiment: the one is Breakdown Voltage (BDV) test under step voltage stress and thermal stress and the other is lifetime test under constant voltage stress and temperature stress. The ac breakdown voltage defined as the break-down point of insulation that leakage current excesses a limit value, l0mA in this experiment, is determined. Because the very high variability of aging data requires the application of statistical model, Weibull distribution is used to represent the failure times as the straight line on Weibull probability paper. Weibull parameters are deter-mined by three statistical methods i.e. maximum likelihood method, graphical method and least squares method, which employ SAS package, Weibull probability paper and FORTRAN, respectively. Two chosen models for predicting the life under simultaneous electrical and thermal stresses are inverse power model and exponential model. And the constants of life equation for multistress aging are calculated using numerical method, such as Gauss Jordan method etc.. The completion of life equation enables to estimate the life at normal stress based on the data collected from accelerated aging test. Also the comparison of the calculated lifetimes between the inverse power model and the exponential model is carried out. And the lifetimes calculated by three statistical methods with lower voltage than test voltage are compared. The results obtained from the suggested experimental method are presented and discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.216-223
• /
• 2005

The coefficient of consolidation has been evaluated using the conventional oedometer tests based on the one-dimensional consolidation theory. In the field, however, the actual response of the soil will be subject to the three-dimensional condition during consolidation. In this research, a new estimation method of the coefficient of consolidation for the various stress-deformation conditions was proposed. The good agreement between the computed dissipation of pore pressure and the measured data confirms the usefulness and the applicability of the proposed method to predict the exact rate of consolidation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.311-317
• /
• 2004

This paper proposes engineering estimation equations for the maximum deflection of a cylinder subject to bending under elastic-plastic and elastic-creep conditions. Being based on the reference stress approach, the proposed equations are simple to use and can accommodate general tensile and creep behaviours. Validation against detailed 3-D FE results using actual stress-strain data and realistic creep-deformation data shows excellent agreement, which provides confidence in the use of the proposed equation. Based on the proposed equations, together with information on in-service inspection data, discussion is given how to estimate future time-dependent and time-independent deflection of the CANDU pressure tube. Thus the present result would be valuable information for integrity assessment of the CANDU pressure tube.

• Journal of Korean Society for Quality Management
• /
• v.10 no.1
• /
• pp.2-6
• /
• 1982

Suppose a system with m components is subjected to a random stress. We consider the estimation of reliability when data consist of random samples from the stress distribution and the strength distributions. All the distributions are assumed to be independent exponential with unknown scale parameters. An explicit form of system reliability and the minimun variance unbiased estimator are obtained. The asymptotic distribution is also obtained by expanding the minimum variance unbiased estimator about the maximum likelihood estimator and establishing their equivalance. The performance of the two estimators is compared by Monte Carlo Simulation.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.212-213
• /
• 2019

High power and energy applications of battery require a large number of batteries to be connected in series, parallel or mixed configurations. The reliability or these batteries is improved by making them tolerant to faults i.e. by bypassing the fault cells and adding new cells to compensate the voltage and current requirement. The addition or removal or cells may cause the current stress on other healthy cells. The estimation and control or this current stress is one or the technique proposed by other researchers. This study intends to identify a suitable scalable configuration which can either avoid or reduce the efforts on the estimation and control of stress current. In addition, this paper will explore the issues associated with hot-swap.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.317-324
• /
• 2003

Kriging interpolation is one of the gennerally used interpolation techniques in Geostatics field. This research refers to the contents about important experimental variogram and the study of theoretical variogram and formulation of Kriging interpolation. Kriging interpolation is applied as interpolation for stress smoothing in finite element method. Posteriori error estimation which makes use of stress smoothing from the FEM is very important part, we try to make practical application of surface regeneration ability from Kriging interpolation. This research is necessary preceding one in order to materialize adaptive FTM through posteriori error estimation. For instance, find the estimate value and estimate the propriety through various theoretical variogram models of the reference analyzed from tensional L-shape domain. It also provides possibility of the Kriging interpolation through comparing to existing Least square method as well.

• Journal of Korean Society for Quality Management
• /
• v.22 no.3
• /
• pp.99-110
• /
• 1994

The strength-stress model has been widely used in a variety of areas including testing the reliability of the item or design procedures. This model was first introduced in 1950's and can be found on various applications in civil, aerospace engineering etc. This paper considers the strength-stress model in detail and proposes an estimator which deals with the reliability estimation problem based on censored observations in the strength variables.

• International Journal of Reliability and Applications
• /
• v.14 no.2
• /
• pp.97-105
• /
• 2013

A stress-strength model is formulated for a multi-component system consisting of k identical components. The k components of the system with random strengths ($X_1$, $X_2$, ${\ldots}$, $X_k$) are subjected to one of the r random stresses ($X_{k+1}$, $X_{k+2}$, ${\ldots}$, $X_{k+r}$). The estimation of system reliability based on maximum likelihood estimates (MLEs) and Bayes estimators in k component system are obtained when the system is either parallel or series with the assumption that strengths and stresses follow exponential distribution. A simulation study is conducted to compare MLE and Bayes estimator through the mean squared errors of the estimators.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.69-80
• /
• 1993

It is important to prevent roll failure in hot rolling process for reducing maintenance coat and production loss. Roll material and rolling conditions such as the roll force and torque have been intensively investigated to overcome the roll failures. In this study, a computer roll life prediction system under working condition is developed and evaluated on IBM-PC level. The system is composed and fatigue estimation models which are stress analysis, crack propagation, wear and fatigue estimation. Roll damage can be predicted by calculating the stress anplification, crack depth propagation and fatigue level in the roll using this computer model. The developed system is applied to a work roll in actual hot rolling process for reliability evaluation. Roll failures can be diagnosed and the propriety of current working condition can be determined through roll life prediction simulation.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.30-37
• /
• 1997

This paper deals with the residual stress of carburized spur gears is calculated being on the assumption that the main cause of residual stress is the volume difference between case and core due to the martensitic transformation in cooling. A formula is proposed to estimated the residual stress from the hardness and the amount of retained austenite. The estimated residual stress is close to the stress measured by X-ray method. The estimated residual stress is applied to the analysis of the fracture mechanics of carburized spur gear teeth. The stress intensity factor due to the residual stress is demonstrated. The stress intensity factor is computed by the influence function method, and it is shown that the factor is decreased by the residual stress in Carburized gear tooth.