• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.97-100
• /
• 2008

Subjected to seismic action causing large deformation of bridge columns, the plastic hinge region is commonly formed in the column end zone. The deformation capacity of a concrete column can be expressed by using plastic hinge length. The mechanical properties of high-strength reinforcing steel is different from that of normal-strength steel and the mechanical properties of steel will influence the plastic hinge formation. Therefore, in other to accurately predict the deformation of concrete column using high-strength steel, the plastic hinge length can be expressed as a function of the mechanical properties of steel such as the tensile to yield strength ratio and the strain at ultimate state. However, little research has been conducted into the effect of mechanical properties of steel on the plastic hinge length. It was difficult to measure the plastic hinge length from the test results. Therefore, the plastic hinge length of concrete columns was investigated from the curvature profile. A numerical approach was used to study the effect of various parameters on plastic hinge length. Based on the results of the numerical parametric study, a new expression for plastic hinge length was proposed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.684-695
• /
• 1992

The present study is concerned with the analysis of three-dimensional sheet metal forming process by the upper-bound method. For the analysis a systematic approach is necessary for the expression of geometric configuration of the deforming workpiece. In the present paper geometric configuration is constructed by three unit surfaces which are defined by sweeping the vertical section curves and boundary curve. The principal components of strain increment during the process is calculated directly from the change of geometric configuration for an arbitrary triangular element. The corresponding solution is found through optimization of the total energy consumption with respect to some parameters assumed in the velocity field and geometric profile. In order to verify the effectiveness of the present method, hydrostatic bulging of a rectangular disphragm is analyzed and the computation by the present method for the geometric shape renders the good result. From the comparison of the present results with the existing experimental results and elastic-plastic finite element solutions, good agreements have been obtained for the pressure curves, polar membrane strains and pressure distributions. The present method can thus be further applied to the analysis of other three-dimensional sheet metal forming processes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.307-316
• /
• 2004

This study examined the cause of the wrinkle defect which is frequently encountered in wire rod rolling of low carbon steel$(C0.08\~0.13wt.\%)$. Even a small defect on the surface of rolled bars can easily develop into fatal cracks during cold heading process of low carbon steel, and it is therefore necessary to minimize inherent defects on the surface of hot rolled bars. Hot rolling process of low carbon steel was analyzed to identify the cause of the wrinkle defect in conjunction with FE analysis. The integrated analysis revealed that the wrinkle defect initiated in the first stage of rolling, and it was at the billet edge where severe deformation and drastic temperature drop were present. To elucidate the micro-mechanical mechanism of the wrinkle defect, hot compression tests were carried out at various temperatures and strain rates using Gleeble-3800. The surface profile of the each other compressed specimens was compared, and rough surface lines were observed at relatively low temperatures. Those surface defects can develop into wrinkles during multi-pass rolling. To control the wrinkle defect in rolling, it is necessary to design an adequate caliber which can minimize the loss of ductility, and thereby prevent flow localization. To use the result of this study fur other steels, the quantitative measure of the wrinkle defect and flow localization parameter should be proposed.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.79-85
• /
• 2002

Recently, prestressed H-Beam bridges with external unbonded Tendons are increasingly built. The mechanical behavior of prestressed steel H-beams is different from that of normal bonded PSC beams in a point of the slip of tendons at deviators and the change of tendon eccentricity that occurs, when service load are applied in external unbonded steel H-beams. The concept of prestressing steel structures has been widely considered, in spite of long and successful history of prestressing concrete members. In the study, The flexural test on prestressed steel H-beams has been performed in the various aspects of prestressed H-beam including the tendon type and profile. The load was plotted against the deflection and the strain respectively in the steel beam and prestressing bars. The value expected with the equation of internal force equilibrium and compatibility between the deflection of the bars and the H-beam was found to correlate well with the measured data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.899-904
• /
• 2014

Thickness profiled blank is designed using optimization techniques for maximizing the bulged heights during the free bulging of Inconel 718. The thickness of the blank was described by the Bezier curve and the locations of the control points were used as the design variables for optimization. The maximization of the bulged heights within the limited strain range served as the objective function and constraints for optimization. The equivalent static loads method for non-linear static response structural optimization (ESLSO) was used and the result of the optimization revealed 22 increased bulged heights. A free bulging test using a blank with an optimized profile was conducted to verify the optimization process. The results were compared with those of numerical analysis in terms of bulged height and deformed shape.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.273-283
• /
• 2011

The objective of this study was to determine the feeding effect of a diet containing Cordyceps with fly pupa on the changes in blood lipid profile from broiler chickens, fatty acids and thiobarbituric acid reactive substances (TBARS) in chicken meat. A total of 360 chicks (Ross strain 308) were divided on hatch day into four treated groups with respect to a 35-day feeding regimen: T1 (control group), T2 (2.0% Cordyceps with fly pupa), T3 (3.5% Corceps with fly pupa) and T3 (5.0% Cordyceps with fly pupa). Blood triacylglyceride and total cholesterol level was significantly decreased by 5.32-10.63% and 9.23-12.62%, respectively, in groups T2, T3 and T4 when compared to T1 (p<0.05). Water holding capacity was significantly highest in T2 (p<0.05), while there were no significant differences among groups T2, T3 and T. In chicken meat, the ratio of saturated fatty acid to unsaturated fatty acid was high in the T3 and T4 groups, the ratio of n-6 to n-3 fatty acid was low in the T2, T3 and T4 groups and oleic acid (18:1n-9) was high in the T2, T3 and T4 groups, when compared to T1 (p<0.05). TBARS tended to increase according to the storage time (in days), and was significantly lower in the chicken thigh muscles with skin in groups T2, T3 and T4 as compared to T1 (p<0.05). These results suggest that a diet containing 2.0-3.5% of Cordyceps with fly pupa may decrease blood lipid and improve both the shelf-life and quality of broiler chicken meat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1121-1127
• /
• 2002

Sixteen crossbred (Bos indicus${\times}$Bos taurus) calves were randomly distributed in two groups (NP and LP) of eight calves each to study the effect of restricted (75%) protein supply on growth and immuno-biochemical response as an indicator of production and health of under-nourished animals during 3 to 9 months of age. The normal requirement of protein was provided to group NP and a less of 25% to group LP through calculated amount of concentrate and roughage in their daily ration. Assessment was made for weekly change in live weight, periodic alteration in blood metabolites and immunological status at six months of age in calves. An initial (during 3 to 6 months of age) depression (p<0.05) in growth was seen in low protein fed group (LP) compared to NP, which became non-significant in the later period of life (6 to 9 months of age). There was no significant effect on haemoglobin, total protein, albumin and globulin concentration except that of urea, which was decreased significantly (p<0.05) in animals fed on low protein diet ($19.83{\pm}1.25$ vs $25.93{\pm}1.29mg/dl$). The treatment effect that was seen in different periods of life was not uniform for other parameters except for urea, which showed a regular depression in LP compared to NP. The assessment of immunological status by indirect haemagglutination (IHA) test against Pasteurella multocida (P52 strain) was considerably (p<0.05) reduced in animals on LP ration compared to those on NP. It is thus argued that with poor nutrition (low protein) and state of compromised immunological response the production and health of the animals will be adversely affected.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.9
• /
• pp.1498-1503
• /
• 2007

To identify novel crystal proteins, Bacillus thuringiensis 2385-1 was isolated from Korean soil samples and characterized. The H-serotype of 2385-1 was identical to that of subsp. kenyae (H4a4c), and its crystal toxin was bipyramidal-shaped. However, 2385-1 showed a much higher toxicity towards Plutella xylostella and Spodoptera exigua larvae than subsp. kenyae. In addition, the crystal protein profile and plasmid DNA pattern of 2385-1 differed from those of subsp. kenyae. To verify the crystal protein gene types of 2385-1, a PCR-RFLP analysis was performed, and the results revealed that 2385-1 contained two novel cry1-type crystal protein genes, cryl-5 and cry1-12, in addition to the crylJal gene. The deduced amino acid sequences of cryl-5 and cry1-12 showed a 97.9% and 75.7% sequence similarity with the CrylAb and CrylJa crystal proteins, respectively. Among the novel crystal proteins, Cry1-5 showed a high toxicity towards P. xylostella and S. exigua larvae. In conclusion, B. thuringiensis 2385-1 is a new isolate in terms of its gene types, and should be a promising source for an insecticide to control lepidopteran larvae.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1555-1562
• /
• 2010

Development of the strain and the fermentation process of Hansenula polymorpha was implemented for the production of ${\gamma}$-linolenic acid ($GLA,\;C18:3{\Delta}^{6,9,12}$), an n-6 polyunsaturated fatty acid (PUFA) that has been reported to possess a number of health benefits. The mutated ${\Delta}^6$-desaturase (S213A) gene of Mucor rouxii was expressed in H. polymorpha under the control of the methanol oxidase (MOX) promoter. Without the utilization of methanol, a high-cell-density culture of the yeast recombinant carrying the ${\Delta}^6$-desaturase gene was then achieved by fed-batch fermentation under glycerol-limited conditions. As a result, high levels of the ${\Delta}^6$-desaturated products, octadecadienoic acid ($C18:2{\Delta}^{6,9}$), GLA, and stearidonic acid ($C18:4{\Delta}^{6,9,12,15}$), were accumulated under the derepression conditions. The GLA production was also optimized by adjusting the specific growth rate. The results show that the specific growth rate affected both the lipid content and the fatty acid composition of the GLA-producing recombinant. Among the various specific growth rates tested, the highest GLA concentration of 697 mg/l was obtained in the culture with a specific growth rate of 0.08 /h. Interestingly, the fatty acid profile of the yeast recombinant bearing the Mucor ${\Delta}^6$-desaturase gene was similar to that of blackcurrant oil, with both containing similar proportions of n-3 and n-6 essential fatty acids.

• The Plant Pathology Journal
• /
• v.34 no.4
• /
• pp.269-285
• /
• 2018

Bacterial leaf blight is a major disease of eucalypt, especially under nursery conditions. Different bacterial species have been associated with the disease in several countries, and despite its importance worldwide, it is not clear to date whether similar disease symptoms are caused by the same or by different etiological agents. In this study, 43 bacterial strains were isolated from blighted eucalypt leaves collected in different geographic areas of Brazil and inoculated onto a susceptible eucalypt clone. Polyphasic taxonomy, including morphological, physiological, biochemical, molecular, and pathogenicity tests showed that only certain strains of Xanthomonas axonopodis caused symptoms of the disease. Strains varied in their aggressiveness, but no correlation with geographic origin was observed. MLSA-based phylogenetic analysis using concatenated dnaK, fyuA, gyrB and rpoD gene sequences allocated the strains in a well-defined clade, corresponding to Rademarker's group RG 9.6. Inoculation of nineteen plant species belonging to seven botanical families with representative strain LPF 602 showed it to be pathogenic only on Eucalyptus spp, and Corymbia spp. Based on distinct biochemical and pathogenic characteristics that differentiate the eucalypt strains from other pathovars of the X. axonopodis species, here we propose their allocation into the new pathovar X. axonopodis pv. eucalyptorum pv. nov.