• Bulletin of the Korean Chemical Society
• /
• v.15 no.3
• /
• pp.204-209
• /
• 1994

Catalytic hydroacylation has been achieved by the reaction of 8-quinolinecarboxaldehyde (1) and various vinyl derivatives such as 2a, 2b and 2c with Wilkinson's complex (3) to give linear alkyl ketones, 4a, 4b and 4c, respectively. However, stoichiometric ligand-promoted hydroacylation of 2a and 2b with [$(C_8H_{14})_2RhCl]_2$ (5) resulted in a mixture of the branched alkyl ketones and the linear alkyl ketones in different ratios. Stoichiometric hydroacylation of some other olefin derivatives such as 6, 11, 12 and 26, produced functionalized alkyl ketone compounds.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.18-19
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.71-72
• /
• 2006

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.782-783
• /
• 2006

Titinium carbide $(TiC_x)$ was produced by self-propagating high temperature synthesis (SHS) method. The morphology and non-stoichiometric number of the SHS product were observed by scanning electron microscopy and neutron diffractometry, respectively. Tubular titanium carbide with hole inside was formed with different non-stoichiometric number (x), which value increased with combustion temperature.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.121-128
• /
• 2007

The purpose of this study was to investigate the removal efficiencies of HCl in dry reactor and Bag-Filter system. The bicarbonate was used as adsorbent to measure the HCl removal rate. The performance of bicarbonate was evaluated to investigate the removal efficiency. It was analysed that the best operation condition in using bicarbonate in process. The operating parameters was residence time, stoichiometric ratio, temperature and pressure. The Residence time was 1.5 sec, stoichiometric ratio was 1SR, 1.25SR, temperature was $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and the bag filter pressure was 210mmAq, 230mmAq, 250mmAq. In this study it was found that the stoichiometric ratio and pressure can be effected in removal of HCl however the removal efficiency do not depends on temperature. The best operating condition was on 1SR, 230mmAq and $180^{\circ}C$ respectively and in this condition the best removal rate was 99.50%.

• Journal of Environmental Science International
• /
• v.10 no.1
• /
• pp.59-64
• /
• 2001

The effect of major operating parameters in spray drying sorber(=SDS) for automatic control for the simultaneous removal of acidic and organic gaseous pollutants from solid waste incinerator was performed. The field experiment was carried out in pilot scale test for the quantification of major operating parameters of hydrophilic and the hydrophobic pollutants. The removal efficiencies of $SO_2$and HCI in the 5wt% slurry condition were being increased with the increase of the stoichiometric ration which is the molecular ratio of lime to the pollutant concentration, and with the decrease of inflow flue gas temperature in the pilot SDS reactor. The removal efficiency along the height of spray drying sorber was closely related to the temperature profile, and more than 90% of total removal efficiency was achieved in an absorption region. For the removal of acidic gas the optimum operating condition considering the economics and a stable operation is the 5wt% of slurry concentration, 1.2 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. For the organic gases of benzene and toluene the removal efficiencies were 20-60% which is much lower than that of acidic gas. The best removal efficiency was obtained at 1.5 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. The organic\`s removal efficiency along the height of spray drying sorber was quite different from that of acidic gas, that is, more than 60% of the total removal efficiency for benzene and 90% of the total removal for toluene were achieved in the dried adsorption region, which was formed at the lower or exit part of the reactor.

• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.177-180
• /
• 2005

Ferroelectric $LiTaO_3$ single crystals, grown by the Czochralski method, were thermally treated at temperature $1000^{\circ}C\;and\;1100^{\circ}C$. Electron paramagnetic resonance (EPR) study of stoichiometric $LiTaO_3$ and thermally treated $LiTaO_3$ crystals has been investigated by employing an X-band spectrometer. From the $Fe^{3+}$ EPR spectra, it turned out that there is no change of site location and local site symmetry around $Fe^{3+}$ impurity ion between stoichiometric and thermally treated $LiTaO_3$ single crystals. We confirmed that the ionic state of $Fe^{3+}$ ion changed after thermal treatment. The EPR parameters of $Fe^{3+}$ ion in $LiTaO_3$ single crystals are determined with effective spin Hamiltonian.

• Journal of the Korean Institute of Gas
• /
• v.12 no.3
• /
• pp.13-19
• /
• 2008

Among the various prime movers for combined heat and power (CHP) system, the CNG engine is the most commonly used power generation equipment of which power is less than 1MW. The 300 kW class CNG engine for CHP can meet stringent emission regulations with the adoption of stoichiometric air-fuel ratio control and three way catalyst. As the thermal efficiency of the stoichiometric ratio engine is lower than that of lean burn engine, it is necessary to operate the stoichiometric engine at its minimum spark advance for the best torque (MBT). However, knock control should be introduced for the engine under high intake air temperature conditions because MBT operating conditions are generally very close to those of knock occurrence. In this study, engine performances and knocking characteristics were experimentally investigated for the CNG engine that needs to be operated at higher intake air temperature conditions than normal conditions.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.2
• /
• pp.95-101
• /
• 1994

The effects of glycine on cell growth and L-omithine production were investigated in shake-flask and jar fermentor cultures of a citrulline auxotrophic mutant, Brevibacterium ketoglutamicum BK 1046. In the shake-flask culture, the optimal concentration of glycine for L-ornithine production was found to be 20 g/l. In the jar fermentor culture with the glycine at an initial concentration of 20 g/l, L-ornithine production increased by 28%, compared to that of the culture with no glycine added. 37 g/l of L-ornithine was produced when additional feeding of glycine (5 g/l) was made. This was a significant improvement in L-ornithine production compared to that (ca. 24 g/l) of the corresponding batch culture conducted without glycine. According to the stoichiometric analysis with the batch fermentation results, the experimental and theoretical L-ornithine yields based on the glucose consumption were 0.24 and 0.59, respectively. This indicates that the performance of L-ornithine fermentation can further be improved by the supplementation of glycine and the development of a mutant strain possessing a higher growth yield.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.977-980
• /
• 2002

Using the micro-pulling down method, $Nd_2O_3$ doped crack-free stoichiometric $LiNbO_3$ single crystals were grown in 1 mm diameter and 30∼35 mm length. The homogeneous distributions of $Nd_2O_3$ concentration were confirmed by the electron probe micro analysis. The absorption and photoluminescence spectra were measured with respect to the $Nd_2O_3$ doping.