• 대한치과기공학회지
• /
• 제38권1호
• /
• pp.9-22
• /
• 2016

Purpose: The Purpose of this study are to describe the Dental field of present health insurance for custom-made prosthetic implant by dental technicians' work. Results: A total of 300 dental technicians working at dental laboratories in Korea were randomly selected and surveyed, 206(68.7%) of them were used for the statistical analysis. Conclusion: Average daily working time was 10 hours 66%. The average cumulative credit of the clinic for dental prosthesis fabrication rates was Less than 10 million won(21.8%), 10~80 million won(11.7%), more than one hundred million won(1.5%). Remake dental prosthesis was one more than the monthly average of 98.5%. Causes of remake dental prosthesis was dentist impression 83% but did not pay 62.5%. Dental technicians Implant production period was 7 days(48.5%), 10 days(35%) was commissioned by dentists production time is 5 days(46.1%), 7 days(36.5%). President of dental laboratories 3.86 points and dental technicians 3.06 points knew differently about starting of implant health insurance coverage(p<.001). They alike were in favor of insurance coverage for the implant. Dental technicians were lower by 2.36 points for work do you know whether your health insurance application of dental prostheses. Dental technicians are 2.16 points on whether confidence in the pores payment of insurance coverage dental prosthesis, dental laboratory president was lower by 1.85 points. They are very low with 1.97 points on whether confidence in the rate payment of health insurance coverage dental prosthesis(p<.01). The implant prosthesis abutment selected, the abutments designed, design of the implant upper prosthetic, the upper prosthetic fitting dental technicians participate of dental laboratory president showed higher score (p <.05). Conclusion: Hours of dental technicians were making this short period of remake dental prosthesis-related dental prosthesis. Dental clinic and a detailed representation of the dental prosthodontic fabrication request is required for communication between the laboratory in order to reduce the remake of a dental prosthesis, dental insurance coverage written dental prosthodontic fabrication request should be legislated. Implant classification standard medical practice 1-3 Step conduct a thorough costing a total of no. 73 of the correct classification standard medical practice in addition to eight times defined by the act of dental technicians should be defined.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권6호
• /
• pp.712-716
• /
• 2010

본 논문에서는 레퍼런스 시퀀스에 기가 시퀀싱데이터를 매핑하여 얻어지는 커버리지 데이터를 이용한 모양 기반의 단위반복변이 영역 (CNVR) 추출 방식을 제안한다. 제안하는 CNVR 검색 알고리즘은 후보 영역 추출 단계와 후처리 단계로 이루어진다. 후보 영역 추출 단계에서는 추출하고자 하는 CNV의 모양을 입력 변수로 조절하여 다양한 높이 및 크기를 갖는 CNV 후보 영역을 추출한다. 다음, 후처리 단계에서는 레퍼런스 시퀀스와 기가 시퀀싱 데이터에 포함되어 있는 시퀀싱 에러 문제를 보완하기 위하여, 레퍼런스 시퀀스의 에러 영역 보정, GC-content 영역 보정 등의 정제 과정을 거친 후, 최종 CNVR을 추출한다. 제안된 방식의 유용성을 보이기 위하여 "1000 게놈 프로젝트"에 의하여 공개된 실 데이터를 이용한 다양한 실험을 수행하였으며, DGV를 이용하여 추출된 CNVR의 정확도를 검증하였다. 실험 결과에 의하면 제안된 방식은 HLA 영역에 존재하는 반복되거나 결실되는 다양한 모양의 CNV를 효율적으로 검출하였다.

• 보건교육건강증진학회지
• /
• 제32권4호
• /
• pp.59-65
• /
• 2015

Objectives: Health screening in Korea is very active in both the public and private sector. However, primary prevention for health promotion has not been activated yet. Quaternary prevention is the prevention of unnecessary medical interventions or the prevention of overmedicalization. Methods: Data was collected after a search of the literature focusing on keyword. The curriculum guidelines for family medicine residents were collected from the homepage of the American Academy of Family Physicians. Results: This quaternary prevention is just beginning. The first step to enhance the health promotion services in the community is to identify the barriers pertaining to the delivering of health promotion activities. These barriers are related to the patient, the physician, attitudes, health promotion programs and the healthcare system. The second step is to establish new changes, such as expansion of insurance coverage, improvement of medical payment system, provision of consumer-oriented services, connection and integration of providers, and the service provider education and training. Conclusions: In order to enhance the health promotion services in the community we need to identify the barriers and to establish several changes to overcome them.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.91-98
• /
• 2009

The "3+3 Process" for safety critical software for nuclear power plants' I&C (Instrumentation and Control system) has been developed in this work. The main idea of the "3+3 Process" is both to simplify the software development and safety analysis in three steps to fulfill the requirements of a software safety plan [1]. The "3-Step" software development process consists of formal modeling and simulation, automated code generation and coverage analysis between the model and the generated source codes. The "3-Step" safety analysis consists of HAZOP (hazard and operability analysis), FTA (fault tree analysis), and DV (design validation). Put together, these steps are called the "3+3 Process". This scheme of development and safety analysis minimizes the V&V work while increasing the safety and reliability of the software product. For assessment of this process, validation has been done through prototyping of the SDS (safety shut-down system) #1 for PHWR (Pressurized Heavy Water Reactor).

• 한국통신학회논문지
• /
• 제36권2A호
• /
• pp.91-99
• /
• 2011

이동 통신 시스템에서 음영 지역의 셀 커버리지를 확보하기 위하여 다양한 종류의 중계기가 사용되고 있다. 그러나 일반적인 무선 중계기는 송 수신 안테나 간의 궤환신호로 인한 발진 문제 때문에 고출력 옥외 중계기로 상용하기 어렵다. 궤환 간섭제거 중계기는 디지털 적응필터를 이용하여 송 수신 안테나 간의 궤환신호를 제거하여 발진을 방지한다. 본 논문에서는 dual NLMS(Normalized Least Mean Square) 알고리듬을 제안하며, 궤환 채널의 도플러 주파수 추정을 통하여 적응필터의 스텝 사이즈를 결정한다. 시불변 채널 및 다중 경로 페이딩 채널 환경에서 제안하는 알고리듬의 성능을 분석하고 모의 실험을 통하여 검증한다.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.43-49
• /
• 2011

A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome this problem clearly, this paper describes an improved backup protection coordination scheme using an IEC 61850-based distance relay for transformer backup protection. IEC 61850-based IED(Intelligent Electronic Device) and the network system based on the kernel 2.6 LINUX are realized to verify the proposed method. And laboratory tests to estimate the communication time show that the proposed coordination method is reliable enough for the improved backup protection scheme.

• 대한지역사회영양학회지
• /
• 제23권2호
• /
• pp.116-127
• /
• 2018

Objectives: The purpose of this study was to examine the coverage of the current mandatory nutrition labeling system on the nutrient intake of Koreans. Methods: KNHANES dietary intake data (2013) of 7,242 subjects were used in the analysis. KNHANES dietary intake data were collected by a 24-hour recall method by trained dietitians. For analysis, all food items consumed by the subjects were classified into two groups (foods with mandatory labeling and other foods). In the next step, all food items were reclassified into four groups according to the food type and nutrition labeling regulations: raw material food, processed food of raw material characteristics, processed foods without mandatory labeling, and processed foods with mandatory labeling. The intake of energy and five nutrients (carbohydrate, protein, fat, saturated fat, and sodium) of subjects from each food group were analyzed to determine the coverage of the mandatory nutrition labeling system among the total nutrient intake of Koreans. Results: The average intake of foods with mandatory labeling were 384g/day, which was approximately one quarter of the total daily food intake (1,544 g/day). The proportion of energy and five nutrients intake from foods with mandatory labeling was 18.1%~47.4%. The average food intake from the 4 food groups were 745 g/day (48.3%) for the raw food materials, 54 g/day (3.5%) for the processed food of raw material characteristics, 391 g/day (25.3%) for the processed foods without mandatory labeling, and 354 g/day (22.9%) for the processed foods with mandatory labeling. Conclusions: Although nutrition labeling is a useful tool for providing nutritional information to consumers, the coverage of current mandatory nutrition labeling system on daily nutrient intake of the Korean population is not high. To encourage informed choices and improve healthy eating habits of the Korean population, the nutrition labeling system should be expanded to include more food items and foodservice menus.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권8호
• /
• pp.535-542
• /
• 2013

사례기반추론(CBR)은 많은 장점으로 인해 지금까지 의료진단, 생산계획, 고객분류 등 다양한 분야의 의사결정 지원에 적용되어 왔다. 그러나, 효과적인 CBR 시스템을 설계, 구축하기 위해서는 연구자가 직관적으로 설정해야 할 많은 설계요소들이 존재한다. 본 연구에서는 이러한 CBR의 여러 설계요소들 중 사례 검색 단계에서 결합할 이웃 사례들을 보다 효과적으로 선정할 수 있는 새로운 모형을 제시한다. 기존 연구에서는 결합할 이웃 사례를 선정하는 방법으로 사전에 정해진 이웃사례의 수(k-NN의 k)를 적용하든가, 혹은 최대 유사도의 상대적 비율을 임계치로 사용하는 방식을 적용해 왔다. 하지만, 본 연구에서는 결합할 유사사례를 선택하는 새로운 기준으로 0에서 1사이의 값을 갖는 절대적 유사 임계치를 사용할 것을 제안한다. 이 경우, 임계치 값이 과도하게 작아지게 되면, 예측결과의 생성이 잘 이루어지지 않을 수 있는 문제가 발생할 수 있다. 이에, 전체 학습사례들 중에서 예측결과가 생성된 사례의 비중을 커버리지(coverage)로 정의하고, 이를 유사 임계치 최적화 시 제약조건으로 설정함으로서, 사용자가 원하는 수준의 커버리지는 유지한 상태에서 가장 효과적인 유사 사례를 찾아 추론할 수 있도록 모형을 설계하였다. 제안 모형의 유용성을 검증하기 위해, 본 연구에서는 이 모형을 실존하는 국내 한 온라인 쇼핑몰의 표적 마케팅 사례에 적용하였다. 그 결과, 제안 모형이 CBR의 예측 성과를 유의미하게 개선시킬 수 있음을 확인할 수 있었다.

• 대한공간정보학회지
• /
• 제22권2호
• /
• pp.17-24
• /
• 2014

본 논문에서는 지리공간 웹 서비스 기반의 기준점 자동 추출 기법을 제안한다. 제안하는 기법은 3단계로 구성된다. 1) 첫 번째 단계에서는 지리공간 웹 서비스를 통해 대상영상의 촬영지역에 해당하는 기준자료를 자동으로 획득하고, 2) 두 번째 단계에서는 획득된 기준자료와 대상영상에 SURF 알고리즘을 적용하여 후보 기준점을 찾는다. 3) 마지막 단계에서는 RANSAC 알고리즘을 이용하여 추출된 후보 기준점 중 정 정합점을 최종 기준점으로 산출한다. 제안하는 기법은 기준자료를 획득하기 위해 지리공간 웹 서비스를 활용하였다. 이를 통하여 제안하는 기법은 기준영상과 고도자료의 관리 및 획득 시 사용자 편의성을 증대 시켰고, 표준을 따르기 때문에 높은 확장성을 가진다. 본 논문에서는 제안하는 기법을 SPOT-1, SPOT-5, IKONOS 위성영상에 적용하여 실험을 수행하였다. 실험지역에 적용한 결과, 제안하는 기법은 대상영상의 촬영센서, 촬영일자, 해상도 변화에도 RMSE 5화소 미만의 일관된 정확도를 산출하였고, 대상영상의 해상도가 좋아짐에 따라 정확도의 지속적인 향상 가능성을 확인하였다. 또한 기준영상과 고도자료로 군 표준 자료를 사용함으로써 제안하는 기법의 군사적 활용가능성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.415-418
• /
• 2015

In this paper, $TiO_2$ based thin-film transistors (TFTs) were fabricated using by an atomic layer deposition with high aspect ratio and excellent step coverage. $TiO_2$ semiconducting layer was deposited showing a rutile phase through the rapid thermal annealing process, and exhibited TFT characteristics with a $200{\mu}m$ channel length of low-leakage currents (none of current flow during off-state), stable threshold voltages (-10 V ~ 0 V), and a much higher on/off current ratio (<$10^5$), respectively.