• Journal of Technologic Dentistry
• /
• v.38 no.1
• /
• pp.9-22
• /
• 2016

Purpose: The Purpose of this study are to describe the Dental field of present health insurance for custom-made prosthetic implant by dental technicians' work. Results: A total of 300 dental technicians working at dental laboratories in Korea were randomly selected and surveyed, 206(68.7%) of them were used for the statistical analysis. Conclusion: Average daily working time was 10 hours 66%. The average cumulative credit of the clinic for dental prosthesis fabrication rates was Less than 10 million won(21.8%), 10~80 million won(11.7%), more than one hundred million won(1.5%). Remake dental prosthesis was one more than the monthly average of 98.5%. Causes of remake dental prosthesis was dentist impression 83% but did not pay 62.5%. Dental technicians Implant production period was 7 days(48.5%), 10 days(35%) was commissioned by dentists production time is 5 days(46.1%), 7 days(36.5%). President of dental laboratories 3.86 points and dental technicians 3.06 points knew differently about starting of implant health insurance coverage(p<.001). They alike were in favor of insurance coverage for the implant. Dental technicians were lower by 2.36 points for work do you know whether your health insurance application of dental prostheses. Dental technicians are 2.16 points on whether confidence in the pores payment of insurance coverage dental prosthesis, dental laboratory president was lower by 1.85 points. They are very low with 1.97 points on whether confidence in the rate payment of health insurance coverage dental prosthesis(p<.01). The implant prosthesis abutment selected, the abutments designed, design of the implant upper prosthetic, the upper prosthetic fitting dental technicians participate of dental laboratory president showed higher score (p <.05). Conclusion: Hours of dental technicians were making this short period of remake dental prosthesis-related dental prosthesis. Dental clinic and a detailed representation of the dental prosthodontic fabrication request is required for communication between the laboratory in order to reduce the remake of a dental prosthesis, dental insurance coverage written dental prosthodontic fabrication request should be legislated. Implant classification standard medical practice 1-3 Step conduct a thorough costing a total of no. 73 of the correct classification standard medical practice in addition to eight times defined by the act of dental technicians should be defined.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.6
• /
• pp.712-716
• /
• 2010

In this paper, we propose a novel shape-based approach to detect CNV regions (CNVR) by analyzing the coverage graph obtained by aligning the giga-sequencing data onto the human reference sequence. The proposed algorithm proceeds in two steps: a filtering step and a post-processing step. In the filtering step, it takes several shape parameters as input and extracts candidate CNVRs having various depth and width. In the post-processing step, it revises the candidate regions to make up for errors potentially included in the reference sequence and giga-sequencing data, and filters out regions with high ratio of GC-contents, and returns the final result set from those candidate CNVRs. To verify the superiority of our approach, we performed extensive experiments using giga-sequencing data publicly opened by "1000 genome project" and verified the accuracy by comparing our results with those registered in DGV database. The result revealed that our approach successfully finds the CNVR having various shapes (gains or losses) in HLA (Human Leukocyte Antigen) region.

• Korean Journal of Health Education and Promotion
• /
• v.32 no.4
• /
• pp.59-65
• /
• 2015

Objectives: Health screening in Korea is very active in both the public and private sector. However, primary prevention for health promotion has not been activated yet. Quaternary prevention is the prevention of unnecessary medical interventions or the prevention of overmedicalization. Methods: Data was collected after a search of the literature focusing on keyword. The curriculum guidelines for family medicine residents were collected from the homepage of the American Academy of Family Physicians. Results: This quaternary prevention is just beginning. The first step to enhance the health promotion services in the community is to identify the barriers pertaining to the delivering of health promotion activities. These barriers are related to the patient, the physician, attitudes, health promotion programs and the healthcare system. The second step is to establish new changes, such as expansion of insurance coverage, improvement of medical payment system, provision of consumer-oriented services, connection and integration of providers, and the service provider education and training. Conclusions: In order to enhance the health promotion services in the community we need to identify the barriers and to establish several changes to overcome them.

• Nuclear Engineering and Technology
• /
• v.41 no.1
• /
• pp.91-98
• /
• 2009

The "3+3 Process" for safety critical software for nuclear power plants' I&C (Instrumentation and Control system) has been developed in this work. The main idea of the "3+3 Process" is both to simplify the software development and safety analysis in three steps to fulfill the requirements of a software safety plan [1]. The "3-Step" software development process consists of formal modeling and simulation, automated code generation and coverage analysis between the model and the generated source codes. The "3-Step" safety analysis consists of HAZOP (hazard and operability analysis), FTA (fault tree analysis), and DV (design validation). Put together, these steps are called the "3+3 Process". This scheme of development and safety analysis minimizes the V&V work while increasing the safety and reliability of the software product. For assessment of this process, validation has been done through prototyping of the SDS (safety shut-down system) #1 for PHWR (Pressurized Heavy Water Reactor).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2A
• /
• pp.91-99
• /
• 2011

Several repeater systems are used to enhance the cell coverage to location such as shadow and rural areas in mobile systems. But the general RF repeater solutions are not suitable for high power outdoor environment because it has the weakness such as self oscillation problem With adoption of a adaptive digital filter technology, feedback interference cancellation repeater prevents oscillation by detecting and canceling the unwanted feedback signal between transmission and receiver antenna. In this paper, dual NLMS based interference cancellation method is proposed and the step size adaptation can be implemented by the estimation of the feedback channel Doppler frequency characteristics. The performance of the proposed algorithm is quantified via analysis and simulation for the static and multipath fading feedback channels.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.43-49
• /
• 2011

A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome this problem clearly, this paper describes an improved backup protection coordination scheme using an IEC 61850-based distance relay for transformer backup protection. IEC 61850-based IED(Intelligent Electronic Device) and the network system based on the kernel 2.6 LINUX are realized to verify the proposed method. And laboratory tests to estimate the communication time show that the proposed coordination method is reliable enough for the improved backup protection scheme.

• Korean Journal of Community Nutrition
• /
• v.23 no.2
• /
• pp.116-127
• /
• 2018

Objectives: The purpose of this study was to examine the coverage of the current mandatory nutrition labeling system on the nutrient intake of Koreans. Methods: KNHANES dietary intake data (2013) of 7,242 subjects were used in the analysis. KNHANES dietary intake data were collected by a 24-hour recall method by trained dietitians. For analysis, all food items consumed by the subjects were classified into two groups (foods with mandatory labeling and other foods). In the next step, all food items were reclassified into four groups according to the food type and nutrition labeling regulations: raw material food, processed food of raw material characteristics, processed foods without mandatory labeling, and processed foods with mandatory labeling. The intake of energy and five nutrients (carbohydrate, protein, fat, saturated fat, and sodium) of subjects from each food group were analyzed to determine the coverage of the mandatory nutrition labeling system among the total nutrient intake of Koreans. Results: The average intake of foods with mandatory labeling were 384g/day, which was approximately one quarter of the total daily food intake (1,544 g/day). The proportion of energy and five nutrients intake from foods with mandatory labeling was 18.1%~47.4%. The average food intake from the 4 food groups were 745 g/day (48.3%) for the raw food materials, 54 g/day (3.5%) for the processed food of raw material characteristics, 391 g/day (25.3%) for the processed foods without mandatory labeling, and 354 g/day (22.9%) for the processed foods with mandatory labeling. Conclusions: Although nutrition labeling is a useful tool for providing nutritional information to consumers, the coverage of current mandatory nutrition labeling system on daily nutrient intake of the Korean population is not high. To encourage informed choices and improve healthy eating habits of the Korean population, the nutrition labeling system should be expanded to include more food items and foodservice menus.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.535-542
• /
• 2013

Since case-based reasoning(CBR) has many advantages, it has been used for supporting decision making in various areas including medical checkup, production planning, customer classification, and so on. However, there are several factors to be set by heuristics when designing effective CBR systems. Among these factors, this study addresses the issue of selecting appropriate neighbors in case retrieval step. As the criterion for selecting appropriate neighbors, conventional studies have used the preset number of neighbors to combine(i.e. k of k-nearest neighbor), or the relative portion of the maximum similarity. However, this study proposes to use the absolute similarity threshold varying from 0 to 1, as the criterion for selecting appropriate neighbors to combine. In this case, too small similarity threshold value may make the model rarely produce the solution. To avoid this, we propose to adopt the coverage, which implies the ratio of the cases in which solutions are produced over the total number of the training cases, and to set it as the constraint when optimizing the similarity threshold. To validate the usefulness of the proposed model, we applied it to a real-world target marketing case of an online shopping mall in Korea. As a result, we found that the proposed model might significantly improve the performance of CBR.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.17-24
• /
• 2014

This paper proposes an automatic extraction method of control point based on Geospatial Web Service. The proposed method consists of 3 steps. 1) The first step is to acquires reference data using the Geospatial Web Service. 2) The second step is to finds candidate control points in reference data and the target image by SURF algorithm. 3) By using RANSAC algorithm, the final step is to filters the correct matching points of candidate control points as final control points. By using the Geospatial Web Service, the proposed method increases operation convenience, and has the more extensible because of following the OGC Standard. The proposed method has been tested for SPOT-1, SPOT-5, IKONOS satellite images and has been used military standard data as reference data. The proposed method yielded a uniform accuracy under RMSE 5 pixel. The experimental results proved the capabilities of continuous improvement in accuracy depending on the resolution of target image, and showed the full potential of the proposed method for military purpose.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.415-418
• /
• 2015

In this paper, $TiO_2$ based thin-film transistors (TFTs) were fabricated using by an atomic layer deposition with high aspect ratio and excellent step coverage. $TiO_2$ semiconducting layer was deposited showing a rutile phase through the rapid thermal annealing process, and exhibited TFT characteristics with a $200{\mu}m$ channel length of low-leakage currents (none of current flow during off-state), stable threshold voltages (-10 V ~ 0 V), and a much higher on/off current ratio (<$10^5$), respectively.