• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.11
• /
• pp.637-642
• /
• 2000

IEEE 1149.1 boundary scan architecture is used as a standard in board-level system testing. The simplicity of this architecture is an advantage in system testing, but at the same time, it it makes a limitation of applications. Because of several problems such as 3-state net conflicts, or ambiguity issues, interconnect testing for multi-drop multi-board systems is more difficult than that of single board systems. A new approach using IEEE 1149.1 boundary scan architecture for multi-drop multi-board systems is developed in this paper. Adding boundary scan cells on backplane bus lines, each board has a complete scan-chain for interconnect test. This new scan-path insertion method on backplane bus using limited 1149.1 test bus less area overhead and mord efficient than previous approaches.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.588-590
• /
• 2003

지난 2001년 7월 제정된 한국전자책문서표준 EBKS(Electronic Book of Korea Standard) 1.0은 지난 2002년 7월 한국산업기술표준원의 산업표준심의를 거쳐 한국전자책 표준문서형 정의, 규격번호 KS X 6100으로 제정되었다. 따라서 KS X 6100을 사용하는 전자책 문서들은 표준의 목적과 명세에 대한 부합 여부를 판별하기 위한 적합성 검사 및 이에 기반한 인증 절차가 요구된다. 본 논문에서는 이러한 적합성 검사의 기준이 되는 적합성 조항(Conformance Clause)의 정의와 이에 따른 적합성 검사 기법(Conformance Testing Methodology)을 제안하였다. 따라서 본 논문에서 정의된 조항들을 통하여 전자책 저작자들은 전자책표준의 목적과 명세에 보다 적함한 전자책문서들을 제작할 수 있으며, 서비스 제공자들은 적합성 검사 기법을 통한 자동화된 적합성 검사 절차를 사용하여 효율적인 적합성 검사가 가능하다.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.255-260
• /
• 2010

The Ministry of Environment simultaneously revised testing methods and emission standards of adhesives product on the "Law of indoor air quality management" for the effective management of the building materials releasing pollutants in great quantities. Accordingly, it is impossible to compare original standards with revised standards directly. The influences of each factor of the revised testing methods of adhesive product on the emission rate of pollutants are reviewed through comparing with the original testing method. Through this study, revised pollutant emission control standards were assessed. With the result that it is found that emission rate of adhesives product is weakened two and half times by changing test period and the emission rate resulting from changing drying time has little difference. As a result of comparing TVOC emission standards with the original testing method considering the modification of testing methods, it is found that the emission standard through this revision is strengthened about 2.1 times more than that of present testing method.

• Journal of Applied Reliability
• /
• v.18 no.1
• /
• pp.49-55
• /
• 2018

Purpose: To propose improved method for normalization, compare to the de facto international standard which is IESNA TM-21 or conventional normalization methods. Methods: Firstly, we analysed conventional methods and specified the problem of normalization method which is based on first measured data. Secondly, we proposed our approach which is based on the design specification. Lastly, we studied a real degradation data which is conducted for 15,000 hours. Conclusion: Proposed normalization method is better approach because it can reflect real data and design specification, and reduce distortion when analysing degradation data. Also, It is appliable to other long-life reliability items.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.1
• /
• pp.57-71
• /
• 1992

These studies were carried out to establish Korean opinion about "The electronic method of raw silk testing and grading" which was taken shape along with the report by Silk Standard Committee(S.S.C.) at the meeting of International Silk Association(I.S.A) Directing Board session held in Zurich Swiss. This establishment was througly examine whether or not the above are the essential factors to be fulfilled in force as a international standard method of raw silk testing and grading.d grading.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.965-968
• /
• 2008

The KS F 2403 method used on domestic sites for checking the compressive strength of a structure, sets the compressive strength of the concrete used in structural specimens as the compressive strength of testing specimens. Under this regulation, the curing method used for testing the specimens must be the standard ponding curing method (20$\pm$2$^{\circ}$C). However, because in-placed concrete is exposed to open air and cured under the seasonal temperature changes, the compressive strength of a real structure is different from the tested compressive strength. (Therefore,) This thesis first identifies the distinct characteristics of the strength development by applying the curing method listed under the KS and used for testing specimens on compressive strength tests; the atmospheric curing method, the sealed curing method, and the structural specimen core strength testing methods used for the in-sites quality checks including reckoning of the compressive strength of the structural specimens and form-demolding period; and the curing method suggested in this research, which sets the internal conditions of the structural specimens as the conditions of the applied curing method. Then, the thesis suggests the specimen curing method that most closely reenacts the compressive strength of the concrete used on the structural specimens

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.439-448
• /
• 2009

• The Journal of Korean Association of Computer Education
• /
• v.6 no.3
• /
• pp.37-45
• /
• 2003

Conformance testing is to test whether an implementation faithfully meets the requirements of a standard or specification. Above all, it is important to test conformance for XML processors because system errors caused by XML processor without conformance affect badly all related XML based systems. Thus, it is essential to implement XML processors with conformity for the sake of interoperability between XML based systems. In this paper, we survey related works. and describe our method and tool for XML conformance testing. And we show our testing result for Xerces 1.4.4. which is developed as Apache's XML project. as an example.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.541-545
• /
• 2010

AUTOSAR, a standard software platform for automotive, has been developed to manage software complexity and improve software reuseability. However reuse of test system is difficult because it is dependant on implementation language and test phase. In this paper, we suggest a test system generation method for AUTOSAR software component using TTCN-3, a standardized testing language. TTCN-3 test system is generated automatically from AUTOSAR XML containing software design information. The test system consists of TTCN-3 tester and target system and tests functionality and worst case response time of software under simulation environment. With the proposed testing techniques we can reduce time and effort to build the testing system and reuse testing environment.