• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.54-61
• /
• 2017

The purpose of this study is to develop standard reference materials for safety control of construction materials considering the required performance of standard materials including flow performance incorporating particles. The flow characteristics of concrete are very complicated depending on mixing proportions of constituent materials, admixtures, amount of mixing, type of mixer, time of mixing, temperature and so forth. Uncertainties and multidimensional properties of concrete have been evaluated through various studies but there are few researches for the development of standard reference material. In this study, based on the rheological concept, the flow performance of construction materials was evaluated to understand the properties of standard reference materials and was finally obtained representing materials which simulate the standard reference materials.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.293-294
• /
• 2009

The spectral responsivity of solar cells has been measured under high background irradiance using an LED-based differential spectral responsivity Comparator (DSR-C). The comparator developed is fully automated and has some advantages: It does not need a chopper to modulate the light. Unlike the conventional method, it does not require a monochromator to select wavelength. It covers a wavelength range up to 1200 nm. The wavelength range of the comparator is limited by the spectral power distribution of the LEDs and the spectral responsivity of the standard detector. An active temperature control was utilized to meet the specified standard conditions of solar cell test. This work shows the effect of different levels of background irradiance on the spectral responsivity and the importance of same background irradiance for solar cell test as specified by the corresponding standard.

• Journal of Korean Critical Care Nursing
• /
• v.2 no.2
• /
• pp.56-67
• /
• 2009

Purpose: This study was done to suggest the standard ICU nursing procedure and standard ICU nursing practice time carried out according to the standard ICU nursing procedure. Methods: Through the literature review, 35 standard ICU nursing activities were selected and classified under 6 categories. Standard nursing procedures were described by research team and 4 clinical practice experts. Content validity of descripted nursing procedure was performed by 6 clinical practice experts. After that standard ICU nursing procedures were identified, standard nursing practice times were checked through 1:1 observation. Results: 35 ICU nursing activities were identified and categorized into 6 domains of activities. Also, their standard nursing procedures were identified, and finally 33 standard nursing practice times were measured and analyzed. The result of the measurement, 1 ICU nursing activity was spent above 30 minutes, 3 activities done within 10-20 minutes, 4 activities done within 5-10 minutes, and 25 activities were spent below 5 minutes. Conclusion: Through this study, 35 standard ICU nursing procedures were described and 33 standard ICU nursing practice times which carried out according to standard ICU nursing procedures were checked. The result can be as fundamental data for the study of nursing activity time in the ICU.

• Journal of Navigation and Port Research
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2012

In order to improve the existing S-57 standard, International Hydrographic Organization(IHO) has developed S-100 standard, a Universal Hydrographic Data Model(UHDM) expanded from ISO 19100 series standard to hydrographic area, and is in the process of its implementation. International Maritime Organization(IMO) has established CMDS based on e-Navigation strategy data standard as International Association of Lighthouse Authorities(IALA) established IHDM based on aids to navigation data standard and each data standard is linked with the S-100 standard. Fundamental concept and core principles of S-100 standard is suitable not only for the development of a wide range of hydrographic data and service production standard, including the next generation ENC, but also the development of product specification of non-hydrographic area. This study has examined the operation principle of S-100 standard and analyzed its implementation process as e-Navigation data in relation with ENC. It also noted the utilization of S-100 standard based e-Navigation and its potential effect via examining the development cases of S-100 standard-based product specification, such as nautical publication, ship reporting and pilot request, digital routing guide, tide and water level transmission and other important data cases of e-Navigation field.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.53-62
• /
• 2011

Objectives : Burn is most common adverse events of moxibustion. Various kinds of components influence on the heat stimulation of commercial indirect moxa, but there are not enough investigation about the status. The purpose of this study is to investigate the 6 components to build a base data that is currently available to build a standard of an indirect moxibustion. Methods : The length and weight, density, thickness of the paper disk, diameter of the paper disk, and diameter in the paper disk hole were measured against 6 kinds of commercial indirect cautery. Results : 1. 'Seoam', 'Kihwang' and 'Taegeuk' shows uniform length than the other brands. 2. 'Dongbang', 'Kihwang' and 'Taegeuk' shows uniform weight than the other brands. 3. 'Dongbang', 'Kihwang' and 'Taegeuk' shows uniform density than the other brands. 4. 'Dongbang' and 'Kihwang' shows uniform thickness than the other brands. 5. 'Seoam', 'Dongbang' and 'Taegeuk' shows uniform diameter of disc hole than the other brands. Conclusions : As a result of investigation, 'Dongbang' and 'Kiwhang' indirect moxibustion was identified as a uniform product. This results are considered as an important base materials of the KS through commercial indirect moxibustion.

• Progress in Superconductivity
• /
• v.14 no.2
• /
• pp.87-91
• /
• 2012

Metallic magnetic calorimeters (MMCs) are one of the most competitive low temperature detector (LTD) readout sensors. They have the advantages of high time resolution, no heat dissipation, and a wide range of operating temperature. We apply MMCs to our neutrinoless double beta decay ($0v{\beta}{\beta}$) search experiment. A $CaMoO_4$ crystal was employed as both a source of $0v{\beta}{\beta}$ and an energy absorber. The crystal was thermally connected to a MMC sensor. We set a simple thermal model for this detector and measured pulse shapes are compared with a numerical solution of the thermal model.

• Herbal Formula Science
• /
• v.24 no.4
• /
• pp.335-351
• /
• 2016

Objective : This study was done to clarify ambiguous non-standard weight and measuring units in medical classics. Methods : Using medical classics and research dissertations, we studied the basic definitions of weight and measuring units and the types of non-standard weight and measuring units. We compared non-standard weight and measuring units in the reference literatures, to determine the dose of herbs in the prescriptions. Results : There are three types of units in non-standard weight and measuring units. These are 'Quantity measuring unit', 'Resembrance measuring unit', and 'Eye measuring unit'. And we found historical efforts and progresses for proper ways to convert non-standard weight and measuring units to standard weight and measuring units. Conclusions : This research will be the basic data for the standardization of prescriptions. Additional study was still required for precise weighing and measuring in Korean medicine and pharmacy.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1120-1130
• /
• 2018

This study was conducted to investigate the dressing percentage and physicochemical characteristics, such as fatty acid composition, water holding capacity (WHC), shear force, meat color, cooking loss, and sensory evaluation, of experimental pork obtained from a total of 12 standard pigs and sows. The water content of tenderloin (73.38%) was the highest in standard pork (p<0.05). A statistically significant difference in crude protein content was shown between standard pork and sow pork (p<0.05). There were significant differences between standard pork and sow pork in shear forces of loin and tenderloin (p<0.01). There was a significant difference in WHC between standard pork and sow pork in loin, tenderloin, and hind legs (p<0.05). The CIE $L^*$ and CIE $b^*$ values of standard loin were significantly higher than those of sow loin (p<0.05). The CIE $a^*$ values of sow loin were significantly higher than those of standard loin (p<0.05). The contents of arachidonic acid for standard pork and sow pork were 0.33% and 0.84%, respectively (p<0.05). However, there was no difference in the total content of unsaturated fatty acid between the two groups. There were no significant differences between standard pork and sow pork after sensory evaluation, except for color and tenderness. The overall acceptability of standard pork was significantly higher than that of sow pork (p<0.05).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.293-296
• /
• 2012

SOC test methodology in ultra deep submicron (UDSM) technology with reasonable test time and cost has begun to satisfy high quality and reliability of the product. A novel hierarchical test architecture using IEEE standard 1149.1, 1149.7 and 1500 compliant facilities is proposed for the purpose of supporting flexible test environment to ensure SOC test methodology. Each embedded core in a system-on- a-chip (SOC) is controlled by test access ports (TAP) and TAP controller of IEEE standard 1149.1 as well as tested using IEEE standard 1500. An SOC device including TAPed cores is hierarchically organized by IEEE standard 1149.7 in wafer and chip level. As a result, it is possible to select/deselect all cores embedded in an SOC flexibly and reduce test cost dramatically using star scan topology.