• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.257-260
• /
• 1998

In this paper, we describe an IMT-2000 system architecture, a protocol stack, and basic MAP scenarios(e.g., registration, call delivery) based on the IS-41 and IS-41 and IS-751. This paper focuses on the MAP scenarios to support the IMSI which is defined for the global roaming between GSM and IS-41 Networks through the Family of System approach. This paper also deals with the design of the MAP protocol stack transported over the ATM networks and introduces the software structure of MAP in IMT-2000 MSC.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.609-614
• /
• 2009

A fuel-cell power system among various alternative power sources has many advantages such as comparatively independable circumstances, high-efficient, and heat-recyclable, thus it is now able to be up to hundreds MWh-scaled through improving feasibility and longevity of it. During the last few decades, numerous research results has been investigated to expand interest in fuel-cell technology. This study presents pressure distribution on the geometrical manifold structures, which are U-type and Z-type, of a planar-type fuel-cell stack by simulated with computational fluid dynamics(CFD). Then, electrical performance of a 200W fuel-cell stack, which is U-type, was diagnosed after pre-conditioning operation. The stack has electrical characteristics ; 22V, 10A, 220W, and current density $200mA/cm^2$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.371-375
• /
• 2001

The concept of a new linear motor that uses piezo-stack actuator is demonstrated. The working principle is far different from the conventional inchworm motor. This motor is based on the self-moving cell concept. The linear motor has three cells and each cell is constructed with one piezo-stack actuator and a shell structure. A cell train is constructed by connecting these cells and the cell train is fitted into a guide way with a proper interference. The cell train moves along the guide way, by activating each cell in succession. The moving motion of the motor is tested. Since this linear motor uses piezo-stack actuator with unified clamping cell, it can produce fast speed, high resolution and large push force.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.649-654
• /
• 2003

This paper is focused on the research of the ultra precision linear motor by using piezo stack actuators. The development of linear motor which can be controlled nano or micro scale is necessary for the precision manufacturing. Self-moving-cell principle is used for the design of linear motor Self-moving-cell linear motor is consisted of three cell structures, and each cell has two shells and one piezo-stack actuator. Each cell can do clamping and moving by two shell structures. The shell structure deformation by piezo stack actuator can move the linear motor by losing the clamping between the shall and guideway. This paper presents the design, manufacturing and test of the motor.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1015-1019
• /
• 2019

In this paper, a new ESD protection device is proposed to improve the trigger voltage and robustness. The HHVSCR and the proposed device were compared to verify the trigger voltage, the holding voltage and the robustness. The gate length was modified to verify the electrical characteristics. The trigger voltage, the holding voltage and the robustness were certified by comparing the proposed device and the stacking structure.

• Korean Journal of Materials Research
• /
• v.30 no.5
• /
• pp.262-266
• /
• 2020

In this paper, we investigated the effect of the passivation stack with Al₂O₃, hydrogenated silicon nitride (SiN_x:H) stack and Al₂O₃, silicon oxynitride (SiON_x) stack in the n type bifacial solar cell on monocrystalline silicon. SiNx:H and SiON_x films were deposited by plasma enhanced chemical vapor deposition on the Al₂O₃ thin film deposited by thermal atomic layer deposition. We focus on passivation properties of the two stack structure after laser ablation process in order to improve bifaciality of the cell. Our results showed SiN_x:H with Al₂O₃ stack is 10 mV higher in implied open circuit voltage and 60 ㎲ higher in minority carrier lifetime than SiON_x with Al₂O₃ stack at Ni silicide formation temperature for 1.8% open area ratio. This can be explained by hydrogen passivation at the Al₂O₃/Si interface and Al₂O₃ layer of laser damaged area during annealing.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.623-626
• /
• 2000

The purpose of this paper is to find an efficient solution for multiple constant multiplication (MCM) problem. Since the circuit structure can be represented as a directed acyclic graph, evolutionary computing is considered as an effective tool for optimization of circuit synthesis. In this paper, we propose a stack type operator as a chromosome element to synthesize a directed acyclic graph efficiently. This type of chromosome can represent a graph structure with a set of simple symbols and so we can employ the similar method to a conventional GA.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2629-2650
• /
• 2019

It is important to construct fully homomorphic encryption with ciphertext matrix that makes fully homomorphic encryption become very nature and simple. We present a general design method of constructing fully homomorphic encryption whose ciphertext is matrix. By using this design method, we can deduce a fully homomorphic encryption scheme step by step based on a basic encryption scheme. The process of deduction is similar to solving equation and the final output result is a fully homomorphic encryption scheme with ciphertext matrix. The idea of constructing ciphertext matrix is ciphertexts stack, which don't simply stack ciphertexts together but is to obtain the desired homomorphic property. We use decryption structure as tool to analyze homomorphic property and noise growth during homomorphic evaluation. By using this design method, we obtain three corresponding fully homomorphic encryption schemes. Our obtained fully homomorphic encryption schemes are more efficient. Finally, we introduce the adversary advantage and improve the previous method of estimating concert parameters of fully homomorphic encryption. We give the concert parameters of these schemes.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.836-841
• /
• 2018

In this paper, This paper is based on the conventional ESD protection circuits SCR and LVTSCR. Also, the SCR-based ESD protection circuit, which is different from the conventional structure, is presented and tested for variations in the trigger voltage and holding voltage. Due to the insertion of additional N +, P + regions, the newly added SCR-based protection circuit have improved electrical characteristics. To discuss the electrical characteristics of the proposed circuit, Synopsys T-CAD simulation data was shown.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.338-341
• /
• 2019

In this paper, we propose a novel ESD device with improved characteristics of LVTSCR, which is a representative ESD protection device, and verify the N-stack technology for design optimized for each required voltage of a specific application. The characteristics of the holding voltage and the trigger voltage, which are the main parameters, are examined and the temperature characteristic, which is an indicator of the tolerance characteristic, is also verified. well region and a parasitic NPN to form a series-connected structure. We used synopsys' T-cad simulation tool for characterization.