• 한국환경과학회지
• /
• 제28권12호
• /
• pp.1123-1131
• /
• 2019

In this study, we investigated the spatial range, distribution pattern, temporal appearance, sex ratio, seasonal pattern, and size of the population of Leptalina unicolor locally inhabiting the wetland protection area in the Jaeyaksan Mountain. We found that the butterfly was distributed across four areas at 750 m above sea level and in an area of 96,000 ㎡. in the southeastern slope of the mountain. The discontinuous distribution of the butterflies in the meadow. According to our survey conducted from 2012 to 2014, L. unicolor occurred in May (spring) and July (summer) each year, with the male population more than three times higher than that of the female population. The population size estimated using the mark and recapture method on the back of the hind wing in the two years was as follows: 877±502 and 1243±800 individuals in the spring and summer of 2012, respectively, and 783±429 and 506±365 individuals in the spring and summer of 2014, respectively, suggesting no specific seasonal pattern. The findings of this study are expected to be useful for the conservation of the populations and habitats of L. unicolor, which are currently distributed locally due to a decrease in population size.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.39-45
• /
• 1998

Gas springs have been widely used in motor vehicles as well as in most areas of industry. Instead of coil springs, these gas springs are easily opreated to open(extension process) or close (compression process) the doors because $N_2$ gas with high pressure and oil are charged in tube. Most of manufacturers are using the trial ＆ error method in order to decide its specification(reaction force, damping force), which tends to waste time and money. Therefore, gas springs have been improved by properly changing the control pressure of $N_2$ Gas with its mounting location and weight to maximize its effect and to minimize its space. Although it has been researched on damping structure to minimize impact which is applied to vehicle when its back door is fully opened, the characteristics of damping structure are not known clearly. There(ore, this paper will not only clearly define the effect of important factors(open ＆ close force)for gas springs through theoretical analysis but also provide optimum design specification through development of program to avoid traditional method of specification determination such as the trail It error method which is widely used in whole industries including automotive industry.

• The Korean Journal of Ecology
• /
• 제13권1호
• /
• pp.25-32
• /
• 1990

The vertical distribution and seasonal fluctuation of soil microarthropods in the forests with different flora were investigated in this study. soil micrarthropods were concentrated as much as 71.8% in the first layer subsoil (0-5cm), 22.3% in the second layer subsoil (5-10cm), and 5.9% in the third layer subsoil (10-15cm) in the decreasing order. The population density in the first layer decreased slightly in winter while that of the second layer increased. However, the density in the first layer bounced back in the following spring. Seasonal fluctuations of population density were revealed "Two peak-Two valley type", that is, the densities were high in fall and spring, and low in winter and summer.nd summer.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.579-588
• /
• 1997

In order to see the stratification related to the heat flux In Deukryang Bay, the oceanographic data on July 12, 1994 and the meteorological data of Kohung and Kwangju meteorological stations were analysed. The temperature durerences between the sea surface and the near bottom were 1~3 ton spring tide (July 12, 1994) In Deukryang Bay. The temperature anomalies were high about 3t during summer In 1994. These mean that the non mixing was not effective In destroying the stratification due to the sea surface heating by the solar radition, even though it was on spring tide. The maximum solar radiation was about 600 ly/day, which was the value of the same date of oceanographic observation. The sensible and the latent heat flux which are 0~100 ly/day were not so varied during summer. The absorbed heat flux through the sea surface was mostly lost by the back radiation. which ranges are about 0~-400 ly/day. The dimensionless mixing parameter related to the buoyancy flux was 5~150$\times$$10^{-5}$. The efficiency of tidal mixing to destroy the stratecation was 0.4~0.6%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1143-1147
• /
• 2004

A mechanical type pulsation dampener for the diaphragm metering pump has been developed. The pulsation pressure is an inevitable phenomenon for the positive displacement pump such as cam operated or solenoid operated metering pump. The pulsation pressure of the metering pump could be the noise source and would be harmful for the piping system which delivers hydraulic fluid. Developed pulsation dampener consists of three coil springs which have different spring constant and height each other. Depending on pressure magnitude of the piping system, total hydraulic pressure on damping diaphragm which compresses coil springs will be varied. Force equilibrium of the pulsation dampener will be set by manual by adjusting the compressed coil spring height. During the discharge stroke, pulsation dampener stores potential energy that is released as the pumping diaphragm back to an initial position during the suction stroke.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 춘계학술발표대회
• /
• pp.1008-1011
• /
• 2015

본 연구는 디지털 컨텐츠를 판매하는 쇼핑몰에서 각 컨텐츠에 대해서 개별적으로 신용카드 기반으로 결제/판매할 수 있도록 하는 시스템이다. 이를 위해 본 연구에서는 PHP 기반 쇼핑몰 전반부(front-end)와 Spring MVC 기반 쇼핑몰 후반후(Back-end)를 분리하여 구현하였다. 전반부에서는 기본적으로 판매되는 각 디지털 컨텐츠를 분류별로 보여주는 기능을 구현하였고, 후반부에서는 각 디지털 컨텐츠에 대한 상세정보를 보여주며 신용카드 결제/IP 기반 접속제한/로깅(logging) 기능 등을 제공하도록 하였다. 특정 디지털 컨텐츠를 온라인으로 결제시에는 그로부터 24시간내에는 몇 번이고 다운로드 할 수 있도록 서비스 하기 위해서, E-rnail을 통한 인증코드(access code)를 제공하는 기능도 구현하였다. 또한, 이러한 구현을 Spring MVC 3.0 기반 구조에 의거하여 구현함으로써, 향후 시스템 유지보수성을 획기적으로 향상시켰다.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.13-18
• /
• 2018

Flexible display tends to grow every year, It tends to be larger, slimmer, and higher in image quality. Therefore, accuracy is required in the manufacturing process of each part. In the curved monitor, the bottom chassis has a structure to which other parts can be attached. The accuracy of the curvature which the bottom chassis of the curve monitor monitors has is important. If the curvature error is large, serious defects such as cracks, warpage, twisting and the like occur. Curvature was analyzed using 3D scanner. In the Forming process and Restriking process steps, spring go occurred, and spring back occurred in the Notching process and Bending process steps. Even in the same process, it was confirmed that the curvature value varied depending on the formed shape.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.418-421
• /
• 2001

Press brake is used as bending and forming sheet metal in vehicle and many kind of industry. This paper deals with development of NC press brake based on high precision positioning device and software, which can be operated on personal computer. In this system, positioning device is used for controlling bending angle and operated by the developed software, which is database from material property, width and thickness of material. This study will make distribution in development of computer aided press brake.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.31-36
• /
• 2008

Sheet metal forming has some merits that are less loss of materials in process, less time-consuming and it makes mass product possible. The product produced by sheet metal forming process has high strength compared to the weight and better surface characteristics. Therefore, sheet metal forming process is a lot used in automobiles, aircrafts, electronics and appliances. This paper made the process design for forming Bracket Front Back Frame Lower, determined the blank shape and size using PAM-STAMP, commercial software and evaluated formability. It has been proved that the optimal blank through the result forming analysis has advantage in terms of formability and spring back compared to the rectangular blank.

• 한국지구과학회지
• /
• 제40권5호
• /
• pp.476-486
• /
• 2019

This study examines the controlling role of synoptic disturbances on $PM_{10}$ spring variability in the Korean Peninsula by using empirical orthogonal function (EOF) and back trajectory analyses. Three leading EOF modes are identified, and a lead-lag analysis suggests that $PM_{10}$ variabilities be closely related to the synoptic weather systems. The first EOF shows the spatially homogeneous distribution of $PM_{10}$, which is influenced by travelling anticyclonic disturbance with negative precipitation and descending motion. The second and third modes exhibit the dipole structures of $PM_{10}$, being associated with propagating cyclones. Furthermore, the back-trajectory analysis suggests that the transport of pollutants by anomalous winds associated with synoptic disturbances also contribute to the altered $PM_{10}$ concentration. Hence, a substantial synoptic control should be considered in order to fully understand the $PM_{10}$ spatiotemporal variability.