• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.413-420
• /
• 2008

The unsteady heat release characteristics play a significant role in combustion instabilities observed in low emissions gas turbine combustors. Such combustion instabilities are often caused by coupling mechanisms between unsteady heat release rates and acoustic perturbations. A generalized model of the turbulent flame response to acoustic perturbations is analytically formulated by considering a distributed heat release along a curved mean flame front and using the flame's kinematic model that incorporates the turbulent flame development. The effects of the development of flame speed on the flame transfer functions are examined by calculating the transfer functions with a constant or developing flame speed. The flame transfer function due to velocity fluctuation shows that, when a developing flame speed is used, the transfer function magnitude decreases faster with Strouhal number than the results with a constant flame speed at low Strouhal numbers. The flame transfer function due to mixture ratio fluctuation, however, exhibits the opposite results: the transfer function magnitude with a developing flame speed increases faster than that with a constant flame speed at low Strouhal numbers. Oscillatory behaviors of both transfer function magnitudes are shown to be damped when a developing flame speed is used. Both transfer functions also show similar behaviors in the phase characteristics: The phases of both transfer functions with a developing flame speed increase more rapidly than those with a constant flame speed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.49-58
• /
• 1997

In this paper, a transfer function was obtained for a PWM high speed solenoid valve controlled metal belt CVT system. The transfer function was defined as the ratio of speed ratio to PWM duty ratio and derived in time domain by linear regression analysis from the experimental results. The transfer function obtained showed different dynamic characteristics for the up and down shift. Also, LQG/LTR controller was designed for the CVT system using the transfer function. It is seen from the experimental results that LQG/LTR control showed good performance for the speed ratio tracking and disturbance rejection. The phase difference and relatively slow response are considered due to the inaccuracy os the transfer functions, which resulted from the inherent nonlinearities of the transmission characteristics of the metal belt CVT.

• School Mathematics
• /
• v.18 no.4
• /
• pp.881-901
• /
• 2016

This study is about investigating students' recognition and expression on relationship of 'time, distance, speed' via teaching experiment. In this process, students showed not only a change in perception of the relationship of 'time, distance, speed' but also recognizing the average speed as a viewpoint of the slope of the line connecting the end points of the interval in the distance function as well as another way of perceiving average speed of a height of a rectangle. In this process, the study shows the scene of expanding the relation of 'distance = time ${\times}$ speed' to 'distance = time ${\times}$ average speed', and also the student who makes the continuous reasoning shows the possibility of constructing a new function that can explain the change of the primitive function by allocating the average rate of change to the interval. Although this study was conducted with a limited number of students, this study suggests some implications through the observation of relationship of 'time, distance, speed' the students'. We hope that these results will be the starting point for various studies for constructing the integral learning model in the future.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.256-263
• /
• 2010

The paper proposes a sensorless speed control strategy for a PMSM (Permanent Magnet Synchronous Motor) based on a new SMO (Sliding Mode Observer), which substitutes a signum function with a sigmoid function. To apply robust sensorless control of PMSM against parameter fluctuations and disturbance, the high speed SMO is proposed, which estimates the rotor position and angular velocity from the back EMF. The low-pass filter and additional position compensation of the rotor are used to reduce the chattering problem commonly found in sliding mode observer with signum function, which becomes possible by applying the sigmoid function with the control of a switching function. Also the proposed sliding mode observer with the sigmoid function has better efficiency than the conventional sliding mode observer since it adjusts the observer gain by variable boundary layer and estimates the stator resistance. The stability of the proposed sliding mode observer is verified by the Lyapunov second method in determining the observer gain. The validity of the proposed high speed PMSM sensorless velocity control has been demonstrated by real experiments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.18-23
• /
• 2002

In this paper, The torque of CNC spindle motor during machining is estimated without speed measuring sensor. The CNC spindle system is divided into two parts, the induction spindle motor part and mechanical part. In mechanical part the variation of the frictional force due to the increment of the cutting torque and the effect of damping coefficient is investigated. Damping coefficient is found to be a function of spindle speed and not influenced by the weight of the load, while frictional force is a function of both the cutting torque and spindle speed. Experimental formulars are drawn for damping coefficient as a function of spindle speed and frictional force as a function of both cutting torque and spindle speed respectively, to estimate the cutting torque accurately. Graphical programming is used to implement the suggested algorithm, to monitor the torque of an induction motor in real time. Torque of the spindle induction motor is well monitored with 3% error range under various cutting conditions.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.3
• /
• pp.51-58
• /
• 2022

PURPOSE: This study aimed to evaluate the correlation between executive function and gait evaluations for the elderly, and validate the obstacle gait evaluation as a cognitive impairment test tool. METHODS: This study was a cross-sectional design. 79 people aged 65 years or older were selected as subjects. The Korean version of the Mini-Mental State Examination (MMSE-KC) to evaluate overall cognitive function and the Trail Making Test (TMT) A, B to measure executive function were performed. The 4-meter walking speed test and the walking speed test while crossing over an obstacle were carried out to evaluate gait. The Spearman's correlation was used to measure the correlation between cognition and gait speed. RESULTS: There was no significant correlation between the 4 m gait speed and executive function( TMT-A (p = .056), TMT-B (p = .115)). However, there was a significant correlation between the 4 m gait speed and MMSE-KC (r = .277, p < .05). There was also a significant correlation between walking speed while crossing over an obstacle and all tests (MMSE-KC (r = .382, p < .01). TMT-A (r = -.327, p < .01), TMT-B (r = -.283, p < .05)). CONCLUSION: It was found that the gait speed while crossing over an obstacle was correlated with all cognitive function tests. Therefore, we suggest the use of the gait speed test while crossing over an obstacle rather than the simple gait test to diagnose cognitive decline.

• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.1-10
• /
• 2005

Cosine and Sine function is widely used for the arithmetic, translation, object drawing, Simulation and etc. of Computer Graphics in Natural Science and Engineering. In general, Cordic Algorithm is effective method since it has relatively small size and simple architecture on trigonometric function generation. However profitably it has those merits, the problem of operation speed is occurred. In graphic display system, the operation result of object drawing is quantized and has the condition that is satisfied with rms error less than 1. So in this paper, the proposed generator is composed of partition operation at each ${\pi}/4$ and basic Cosine, Sine function generator in the range of $0{\sim}{\pi}/4$ using the lower order of Tayler's series in an acceptable error range, that enlarge the range of $0{\sim}2{\pi}$ according to a definition of the trigonometric function for the purpose of having a high speed Cosine, Sine function generation. And, division operator using code partition for divisor three is proposed, the proposed function generator has high speed operation, but it has the problems in the other application parts with accurate results, is need to increase the speed of the multiplication.

• Tribology and Lubricants
• /
• v.20 no.1
• /
• pp.14-20
• /
• 2004

In high-speed gas-levitation applications a high compressibility number may bring a numerical difficulty in predicting generated pressure profiles accurately as it causes erroneous sudden pressure overshoot and oscillation in the trailing-edge. To treat the problem, in this study an exact exponential high-order shape function is introduced in the FE lubrication analyses. It is shown by various example applications that the high-order shape function scheme can successfully subdue undesired pressure overshoot and oscillation.

• The Journal of Korean Physical Therapy
• /
• v.33 no.2
• /
• pp.62-68
• /
• 2021

Purpose: This study examined whether mirror therapy could improve the balance, gait, and motor function of patients with subacute stroke. Methods: Thirty-three patients with subacute stroke were divided randomly into three groups: experimental group1, experimental group2, and the control group. The patients in experimental group1 performed a mirror therapy program on the unaffected side of the lower extremities, and the patients in experimental group2 performed mirror therapy on the affected side of the lower extremities. Both groups performed the exercise for 30 minutes per session, five times a week for four weeks. The control group did not receive mirror therapy. BBS, POMA, 10MWT, and the BRS were used to evaluate the balance, the quality of gait, gait speed, and the motor function before and after the intervention. Results: The gait speed increased significantly in the experimental groups1 and 2 after the intervention. The control group showed no significant difference in the gait speed after the intervention. The change in gait speed before and after the intervention showed a significant difference among the groups. Experimental group1 showed a significant increase in the gait speed compared to that of the control group. Conclusion: This study suggests that mirror therapy could be an effective intervention to improve the gait speed of patients with subacute stroke. On the other hand, there was no difference in the effectiveness of mirror therapy and therapeutic exercise on the balance, gait, and motor function.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1338-1341
• /
• 2002

The Weibull probability density function and the Rayleigh function are compared by analyzing the relations of the capacity factors which are compared the actual wind speed frequency curve with which are modelled using the probability density functions with different mean wind speeds. For this analysis, the wind speed means of arithmetic, root mean square, cubic mean cuberoot, and standard deviations are computed from the measured wind speed data of a specific site and the coefficients of probability density functions are calculated. The capacity factors for Vestas 850[kW] wind turbine are calculated and analyzed. The results shows that the wind speed frequency curve by Rayleigh function is more close to the actual curve than by Weibull function. The more the wind speed frequency curve is close to the actual one, the more the capacity factors become large values.