• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.389-394
• /
• 2004

This paper proposes a speed estimation method using FLC(Fuzzy Logic Controller) in order to realize the speed control of PMAM(Permanent Magnet AC Motor) with no speed sensor. This method uses FLC as a adaptive laws of MRAS(Model Reference Adaptive System) and estimates the rotor speed of PMAM with a difference between the reference model and the adjustable model. Speed control is performed by PI controller with the estimated speed. The experiment is executed to verify the propriety and the effectiveness of the proposed system.

• Child Health Nursing Research
• /
• v.7 no.1
• /
• pp.118-140
• /
• 2001

The purpose of this study was to measure the effect of safety education program in preschool children for accident prevention and improve their health through more systematic method. Data were collected from 584 preschoolers(247 preschooler are assigned to experimental group and 337 preschoolers are assinged to control group) from 4 to 6 years old using APP paper test which consists of questions and drawings. To experimental group, safety education were done 4 times within the time of 30 minutes per 1 time using education books, drawings, OHP. The findings of this study are as follows: 1. There were significant difference in movement(χ²=18.732, p=.0000), behavioral character(χ²=27.785, p=.000), synthetic judgement(χ²=12.02, p=0.002). So, safety education program have effect on preschooler. 2. In the accident proneness on preschooler between experimental group and control group according to general characteristics, it proved significant difference in the case of accident prevention education were done, reasoning power(χ²=10.48, p=.005), movement speed(χ²=7.341, p=.025) and behavioral character(χ²=18.86, p=.000), in the case of housing pattern is private house(individual house, yard?), reasoning power(χ²=6.683, p=.035), movement speed(χ²=12.76, p= .002) and behavioral character(χ²=12.24, p=.002), in the case of housing pattern is mixed-type, movement speed(χ²=6.935, p= .031) and behavioral character(χ²=10.816, p=.004), in the case of housing pattern is over six stories, movement speed(χ²=7.543, p=.023), in the case of subjects' age is 4 years old, movement speed(χ²=16.5, p= .000) and behavioral character(χ²=12.18, p=.002), in the case of subjects' age is 5 years old, movement speed(χ²=7.519, p= .023), watchfulness(χ²=6.372, p=.041), behavioral character(χ²=14.74, p=0.001) and synthetic judgement(χ²=14.5, p=.001), in the case of subjects' sex is male, life safety(χ²=6.406, p=.041), movement speed(χ²=22.86, p= .000), behavioral character(χ²=13.72, p= .001) and synthetic judgement(χ²=13.82, p=.001), in the case of subjects' sex is female, reasoning power(χ²=12.57, p=.002) and behavioral character(χ²=13.16, p= .001), in the case of childrens have past accidental experience, traffic safety(χ²= 6.683, p=.035), in the case of childrens have no past accidental experience, reasoning power(χ²=8.384, p=.015), movement speed(χ²=20.6, p=.000), behavioral character(χ²=25.1, p=.000) and synthetic judgement(χ² =10.79, p=.005), in the case of children's order is first, reasoning power(χ²=11.15, p=.004), movement speed(χ²=11.92, p= .003) and behavioral character(χ²=7.003, p=.030), in the case of children's order is second, movement speed(χ²=6.694, p= .035), behavioral character(χ²=26.9, p= .000) and synthetic judgement(χ²=14.3, p= .001), in the case of nuclear family, reasoning power(χ²=8.777, p=.012), movement speed(χ²=19.0, p=.000), behavioral character (χ²=26.4, p=0.000) and synthetic judgement (χ²=9.999, p=.007), in the case of mothers' school career is under high school graduate, life safety(χ²=8.023, p=.018), movement speed(χ²=10.99, p=.004) and behavioral character(χ²=6.777, p=.034), in the case of mothers' school career is beyond college graduate, reasoning power(χ²=6.717, p= .035), movement speed(χ²=8.963, p=.011), behavioral character(χ²=25.03, p=.000) and synthetic judgement(χ²=15.19, p=.001), in the case of mothers' age ranged 31-34, movement speed(χ²=12.29, p=.002) and behavioral character(χ²=14.17, p=.001), in the case of mothers' age ranged 35-39, movement speed(χ²=9.859, p=.007), behavioral character(χ²=9.095, p=.011) and synthetic judgement(χ²=7.810, p=.020), in the case of mothers' age is over 40, life safety(χ² =5.593, p=.025), in the case of mothers' job is full-time, traffic safety(χ²=6.032, p=.049) and reasoning power(χ²=8.502, p= .014), in the case of mothers' job is part- time., movement speed(χ²=10.99, p=.004) and behavioral character(χ²=7.895, p= .019), in the case of mothers have no job, movement speed(χ²=6.410, p=.041), movement stability(χ²=6.879, p=.032), behavioral character(χ²=27.72, p=.000) and synthetic judgement(χ²=18.11, p=.000). The difference of accident proneness between experimental group and control group according to general characterists, it also showed that there were significant difference in behavioral character compared to other area.. From this findings, we can guess that safety education program change and guide preschoolers' behavioral character to desirable direction.

• Journal of computational fluids engineering
• /
• v.10 no.3 s.30
• /
• pp.70-76
• /
• 2005

A two-layer incompressible time-accurate Euler solver is applied to analyze flow fields around a submerged body moving at a critical speed near a pycnocline. Discontinuities in the dependent variables across the material interface are captured without any dissipation or oscillation using the ghost fluid method on an unstructured grid. It is shown that the material interlace has significant effects on forces acting on a submerged body moving near a pycnocline regardless of the small difference in densities of two layers. Contrary to the shallow water waves, a submerged body can reach a critical speed at very low Froude number due to the small difference in the densities of the two layers.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.9-20
• /
• 1990

The speed ratio-torque load-axial force characteristics of a rubber V-belt (RVB) and a metal V-belt (MVB) CVT are investigated and their performances are compared. It is found that power is transmitted by tension difference in RVB, and by thrust difference in MVB. The nondimensional equations for speed ratio-torque load-axial force of RVB are exactly same as those of MVB. However, actual characteristics of axial forces of RVB and MVB are different depending on their power transmission methods. The torque capacity of MVB is 5-6 times higher than that of RVB due to MVB's higher strength, even if the required axial force of MVB CVT control is 3-4 times higher than that of RVB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.173-179
• /
• 2002

We propose a novel sensing circuit for 2T-2MTJ MRAM that can be used for high speed synchronous operation. Proposed bit-line sense amplifier detects small voltage difference in bit-lines and develops it into rail-to-rail swing while maintaining small voltage difference on TMR cells. It is small enough to fit into each column that the whole data array on selected word line are activated as in DRAMs for high-speed read-out by changing column addresses only. We designed a 256Kb read-only MRAM in a $0.35\mu\textrm{m}$ logic technology to verify the new sensing scheme. Simulation result shows a 25ns RAS access time and a cycle time shorter than 10 ns.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2012

The pressure transient inside the passenger cabin of high-speed train has been simulated using computational fluid dynamics(CFD) based on the axi-symmetric Navier-Stokes equation. The pressure change inside a train have been calculated using first order difference approximation based on a linear equation between the pressure change ratio inside a train and the pressure difference of inside and outside of the train. The numerical results have been assessed for the KTX train passing through a 9km long tunnel of Wonju-Kangneung line at the speed of 250km/h assuming that the train is satisfying the train specification for airtightness required by the regulation.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.337-342
• /
• 2011

The pressure transient inside the passenger cabin of high-speed train has been simulated using computational fluid dynamics(CFD) based on the axi-symmetric Navier-Stokes equation. The pressure change inside a train have been calculated using first order difference approximation based on a linear equation between the pressure change ratio inside a train and the pressure difference of inside and outside of the train. The numerical results have been assessed for the KTX train passing through a 9km long tunnel of Wonju-Kangneung line at the speed of 250km/h assuming that the train is satisfying the train specification for airtightness required by the regulation.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.11-16
• /
• 2010

This study examined the relative effect of participative and assigned goal setting on team performance. Participants were 30 college students and their typing speed was tested. They were ordered on the basis of the typing speed and were divided into 15 pairs, with the members of each pair having similar typing speed. Members in each pair were randomly assigned to the two experimental conditions. Participants were asked to type materials provided by the experimenter for 20 days. The dependent variable was the number of words typed. The results showed that there was no significant difference in performance between the two conditions. The results also showed that the difference in trend between two conditions was not statistically significant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.666-670
• /
• 2008

The low-speed preconditioning technique is applied to solve the compressible Reynolds averaged Navier-Stokes equations for low-speed flows. The space discretization is based on Roe's flux-difference splitting with third-order-accurate MUSCL extrapolation. Time integration is performed employing a diagonal approximate factorization algorithm. The dual-time stepping has been incorporated to solve the unsteady flows. Full multigrid method is implemented to accelerate the convergence rate. To verify the algorithms several cases have been tested. Demonstrated the improvement on convergence and quality of the solution.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.43-58
• /
• 2020

Mulching plastic is used for the purpose of maintaining soil temperature, moisture, and weed and pest prevention in agriculture. Any remaining plastic after use may contaminate the soil and damage crop growth. To solve this problem, mulching plastic wrappers have been studied and developed, but the actual use rate is quite low due to their poor performance and frequent tearing of the plastic on the field. In this study, we developed a tractor attachable mulching plastic wrapper to minimize the tearing of the mulched plastic. The developed mulching plastic wrapper consists of hydraulic motors and pumps, valves, a microcontroller, and sensors. The collecting speed of the plastic mulch was calculated considering the tractor's travel speed and the radius of the collecting drum. A proportional controller was designed to control the rotating speed of the hydraulic motor as the plastic was wound around the collection drum and the radius increased. The performance of an indoor experiment was quite promising because the difference between the collecting speed predicted by the calculation and the actual collecting speed was 2.71 rpm. Based on a field verification test, the speed difference was max. 14.28 rpm; thus, the, proportional integral derivative (PID) controller needs to be considered to control the drum speed precisely. Another issue was found when the soil covered at the edge of the plastic was hardened or the road surface was uneven, the speed control was unstable, and the plastic was torn. In future research, vibrational plows will be equipped to break-up the harden soil for collecting the plastic smoothly.