• 제목/요약/키워드: space experiment

검색결과 1,945건 처리시간 0.028초

해안가 야간경관조명의 빛공해 평가 - 부산시를 중심으로 - (Light Pollution of Outdoor Lighting in Coastal Area - Focused on Busan City -)

  • 공효주;김정태
    • 조명전기설비학회논문지
    • /
    • 제24권6호
    • /
    • pp.18-26
    • /
    • 2010
  • 도시공간의 안정과 쾌적함을 위하여 옥외조명은 우리 사회에서 필수적인 부분이 되었다. 그러나 옥외조명을 잘못 설치할 경우 조명에너지의 낭비뿐만 아니라 건축물 야간경관 훼손을 야기시킨다. 최근 야간 경관조명의 중요성이 부각되면서 지자체마다 야간경관 이미지 구축에 집중을 하고 있다. 그 중 해안가 주변의 옥외조명은 지역 내에 특화된 관광 상권을 구성하며 생동감 있는 도시 이미지를 부여하고 도시경쟁력을 강화 시킬 수 있다. 본 연구는 우리나라의 대표적 항구 도시인 부산의 해안가의 야간경관조명의 빛공해를 평가하는데 그 목적이 있다. 디지털 광학 계측기인 Radiant Imaging ProMetric-1400으로 광안리 해수욕장, 마린시티, 그리고 해운대 해수욕장 주변의 옥외조명을 측정하였다. 모든 옥외조명의 휘도는 국제조명위원회 권고기준과 비교했을 때 약 2~20배 정도 높게 나타났다. 주상복합 상부조명 및 해안에 면한 상가 저층부는 색채 및 휘도의 제한이 필요한 것으로 사료된다.

정보검색에서의 언어모델 적용에 관한 분석 (An Analysis of the Applications of the Language Models for Information Retrieval)

  • 김희섭;정영미
    • 한국도서관정보학회지
    • /
    • 제36권2호
    • /
    • pp.49-68
    • /
    • 2005
  • 본 연구의 목적은 정보검색 분야에서의 언어모델의 적용에 관한 연구동향을 개관하고 이 분야의 선행연구 결과들을 분석해 보는 것이다. 선행연구들은 (1)전통적인 모델 기반 정보검색과 언어모델링 정보검색의 성능 비교 실험에 초점을 두고 있는 1세대 언어모델링 정보검색(LMIR)과 (2)기본적인 언어모델링 정보검색과 확장된 언어모델링 정보검색의 성능 비교를 통해 보다 우수한 언어모델링 확장기법을 찾아내는 것에 초점을 두고 있는 2세대 LMIR로 구분하여 분석하였다. 선행연구들의 실험결과를 분석해 본 결과 첫째, 언어모델링 정보검색은 확률모델, 벡터모델 정보검색보다 그 성능이 뛰어나고 둘째 확장된 언어모델들은 기본적인 언어 모델 정보검색보다 그 성능이 우수한 것으로 나타났다.

  • PDF

손상대를 고려한 암반사면 안정성 평가 및 인자분석 (Assessment of Rock Slope Stability and Factor Analysis with a Consideration of a Damaged Zone)

  • 김진수;권상기;천대성;박의섭
    • 터널과지하공간
    • /
    • 제24권3호
    • /
    • pp.187-200
    • /
    • 2014
  • 굴착 또는 발파 후 암반손상대 내 암반 물성은 응력재분배나 발파충격에 의해 영구히 약화된다. 본 논문에서는 이러한 암반손상대를 사면에 적용하였다. 손상대 유 무에 따라 2차원 모델링을 통해 암반사면의 역학적 정성을 비교하고 안전율에 영향을 미치는 인자를 분석하는 것이 본 연구의 목적이다. 모델링 결과 사면의 역학적 안정성은 손상대 유 무에 따라 현저하게 차이가 있었다. 특히 손상대를 고려한 안전율은 고려하지 않을 때 보다 약 49.4%가 감소하였다. 부분요인설계법을 이용하여 안전율에 관한 인자 분석을 실시한 결과 안전율에 영향을 미치는 주요 인자는 사면 경사, 점착력, 내부마찰각, 높이였다.

30CMM급 태양기공 전기집진 설비의 실내분진 정화 능력에 관한 실험연구 (An Experimental Study of 30CMM Solar Transpired Collector and Cyclone(STCC) System on Indoor Air Dust Removal Performance)

  • 노지희;박상현;강은철;이의준
    • 한국태양에너지학회 논문집
    • /
    • 제25권3호
    • /
    • pp.37-45
    • /
    • 2005
  • Higher requirement of advanced building design code and the development of construction technique have resulted in more thermal and air tight buildings. This has caused the sick building syndrome in a indoor air quality has been relatively getting worse. A new concept with a solar fresh air heating and electrostatic precipitator or called as STCC(Solar Transpired Collector and Cyclone) has been proposed to solve this IAQ issue. This paper describes the assessment study of STCC system under different outdoor airflow rates. The experiment was carried out under real condition with 30CMM STCC system test facility. Incense smoke was used to study the particle concentration decay trends under outdoor airflow rates 0CMM, 10CMM, 20CMM, 30CMM, with applied voltages of 5kV and 15kV for collecting and discharging electrodes of an Electrostatic Precipitator. Result shows that the particle decay increases by increasing the outdoor airflow rates. The collection efficiency, dust cleaning effectiveness(P) and application area calculation result comparisons have also been studied. This factors could be used to estimate how a dust of indoor air quality(IAQ) and removed for a building space with a STCC system.

점대점 통신 기반의 위치인식 기법 (Location Recognition Method based on PTP Communication)

  • 먁마르엥흐자야;권순량
    • 한국콘텐츠학회논문지
    • /
    • 제14권3호
    • /
    • pp.33-39
    • /
    • 2014
  • 국내외적으로 위치정보를 이용한 다양한 위치인식 기반의 지능시스템에 대해 활발한 연구가 진행되어 왔다. 대표적인 점대다점 통신 기반의 위치인식 기법은 TOA(Time Of Arrival)를 이용하여 위치를 인식하고자 하는 노드까지의 거리를 계산하고, 3개 노드들의 위치정보를 삼각측량법에 적용하여 고정노드의 위치를 인식하는 기법이다. 따라서 점대다점 통신 위치인식 기법은 사전에 시스템이 특정 공간에 설치되어 있어야 하는 점과 시스템 구축비용이 필요하다는 단점이 존재한다. 본 논문에서는 이러한 점대다점 통신 위치인식 기법의 단점을 보완하기 위한 레인징 기반의 점대점 통신 위치인식 기법을 제시하고, 점대다점 기반의 통신 위치인식 기법에 대비한 성능을 평가하고자 한다. 이를 위해 실내 환경에서 레인징 기반의 점대다점과 점대점 통신 위치인식시스템을 각각 구축하여 실험하였다. 실험 결과 제안된 점대점 위치인식을 적용한 기법이 기존의 점대다점 위치인식을 적용한 기법에 비해 위치인식 정밀도가 3배 이상 향상됨을 확인할 수 있었다.

Single-axis Hardware in the Loop Experiment Verification of ADCS for Low Earth Orbit Cube-Satellite

  • Choi, Minkyu;Jang, Jooyoung;Yu, Sunkyoung;Kim, O-Jong;Shim, Hanjoon;Kee, Changdon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제6권4호
    • /
    • pp.195-203
    • /
    • 2017
  • A 2U cube satellite called SNUGLITE has been developed by GNSS Research Laboratory in Seoul National University. Its main mission is to perform actual operation by mounting dual-frequency global positioning system (GPS) receivers. Its scientific mission aims to observe space environments and collect data. It is essential for a cube satellite to control an Earth-oriented attitude for reliable and successful data transmission and reception. To this end, an attitude estimation and control algorithm, Attitude Determination and Control System (ADCS), has been implemented in the on-board computer (OBC) processor in real time. In this paper, the Extended Kalman Filter (EKF) was employed as the attitude estimation algorithm. For the attitude control technique, the Linear Quadratic Gaussian (LQG) was utilized. The algorithm was verified through the processor in the loop simulation (PILS) procedure. To validate the ADCS algorithm in the ground, the experimental verification via a single axis Hardware-in-the-loop simulation (HILS) was used due to the simplicity and cost effectiveness, rather than using the 3-axis HILS verification (Schwartz et al. 2003) with complex air-bearing mechanism design and high cost.

Optimized Design of Low Voltage High Current Ferrite Planar Inductor for 10 MHz On-chip Power Module

  • Bae, Seok;Hong, Yang-Ki;Lee, Jae-Jin;Abo, Gavin;Jalli, Jeevan;Lyle, Andrew;Han, Hong-Mei;Donohoe, Gregory W.
    • Journal of Magnetics
    • /
    • 제13권2호
    • /
    • pp.37-42
    • /
    • 2008
  • In this paper, design parameters of high Q (> 50), high current inductor for on-chip power module were optimized by 4 Xs 3 Ys DOE (Design of Experiment). Coil spacing, coil thickness, ferrite thickness, and permeability were assigned to Xs, and inductance (L) and Q factor at 10 MHz, and resonance frequency ($f_r$) were determined Ys. Effects of each X on the Ys were demonstrated and explained using known inductor theory. Multiple response optimizations were accomplished by three derived regression equations on the Ys. As a result, L of 125 nH, Q factor of 197.5, and $f_r$ of 316.3 MHz were obtained with coil space of $127\;{\mu}m$, Cu thickness of $67.8\;{\mu}m$, ferrite thickness of $130.3\;{\mu}m$, and permeability 156.5. Loss tan ${\delta}=0$ was assumed for the estimation. Accordingly, Q factor of about 60 is expected at tan ${\delta}=0.02$.

토마토 유리온실 주변에 설치된 담배거세미나방(Spodoptera litura(Fabricius)) 성페로몬 트랩에 의한 대량포획 효과분석 (Analysis on the Mass-Trapping Effects by Spodoptere litura (Fabricius) (Lepidoptera: Noctuidae) Sex Pheromone Traps Deployed around the Tomato Glasshouse)

  • 김황용;김정환;손병관;조점래;이용휘;김용헌;최만영
    • 한국응용곤충학회지
    • /
    • 제48권2호
    • /
    • pp.245-251
    • /
    • 2009
  • 살충제를 사용하지 않고 성페로몬을 활용한 대량포획기술만으로, 10,000 $m^2$ 규모의 대형 토마토 유리온실에서 단위면적 당 60원/$m^2$의 방제비용으로 담배거세미나방을 효과적으로 방제하는데 성공하였다. 대량포획을 위해 온실 내부에 500 $m^2$당 1개씩 성페로몬 트랩을 설치하고, 담배거세미나방 유입을 막기 위해 온실 외각에 20 m 간격으로 성페로몬 트랩을 설치하는 방법을 이용하여 담배거세미나방을 방제할 수 있었다. 시험기간 동안 트랩당 평균 400마리 이상의 담배거세미나방이 유살되었다.

BIM 기반의 가상현실 다면투사 시뮬레이션 시스템 구축 (Development of Virtual Reality Multi Screen Simulation System based on BIM)

  • 서명배;박형진
    • 한국전산구조공학회논문집
    • /
    • 제30권3호
    • /
    • pp.231-238
    • /
    • 2017
  • 3D 기반의 BIM 도면을 활용을 통해 다양한 건설 시뮬레이션이 가능하다. 이러한 BIM을 기반으로 강력한 몰입환경이 수반되는 가상현실 공간에서 실증실험이 가능한 시뮬레이션 시스템 구축사례가 국내에는 전무한 상황이다. 본 논문에서는 다양한 의사결정 및 가상건설 시뮬레이션이 가능하도록 BIM 도면을 기반으로 3D 기반의 강력한 몰입환경을 제공하는 다면(Multi Screen) 기반의 시뮬레이션 시스템 개발사례를 제시하였다. 구축된 시뮬레이션 실험실은 4K 이상의 해상도를 기반으로 대규모의 3면 디스플레이 공간내에서 다양한 Haptic 장비를 활용해 도면검토, 재난/재해시뮬레이션, 극한건설, 도시계획설계 등이 가능하다. 또한 기존의 BIM 소프트웨어와 완벽한 호환이 가능하여 데이터의 실시간 변환없이 대용량의 도면 등을 검토할 수 있다.

주거용 건물의 개별 환기시스템 필요성에 관한 연구 (The Individual Heat-recovery ventilation system of Residential Buildings)

  • 신우철;이왕제;윤종호;백남춘
    • KIEAE Journal
    • /
    • 제14권6호
    • /
    • pp.99-104
    • /
    • 2014
  • Recently supply of low energy house is increasing which can enhance energy efficiency and indoor environment comfort. Low energy house have to secure air tightness as well as thermal performance so house become high airtightness and inevitably need heat recovery ventilator to enhance indoor air quality. However, most of current ventilation systems are one-click, controlling the entire space so it causes increasing of heating load and fan power which makes it hard to save energy. Thus, Individual Control system is required which can achieve both enhancing indoor air quality and decreasing heating load and electric fan power. Thereby, in this study, we analyzed the correlation between ventilation and fan power through mock-up experiment and measured ventilation load under individual control system. As a result, under the condition of $24^{\circ}C$ of indoor temperature for 6 month(November to April) in Daejeon, ventilation load by fan speed was $10.9{\sim}19.6kWh/m^2{\cdot}a$ when operated 24 hours and $7.6{\sim}13.7kWh/m^2{\cdot}a$ when operated 12 hours in night time. In addition, it is possible to reduce at most 60% of ventilation load under the individual control system; measured ventilation load was $7.4kWh/m^2{\cdot}a$ when operated 24 hours, and $5.5kWh/m^2{\cdot}$ when operated 12 hours in night time.