• 제목/요약/키워드: solvent

검색결과 7,287건 처리시간 0.034초

Extraction Equilibria and Solvent Sublation for Determination of Ultra Trace Bi(Ⅲ), In(Ⅲ) and TI(Ⅲ) in Water Samples by Ion-Pairs of Metal-2-Naphthoate Complexes and Tetrabutylammonium Ion

  • Kim, Young-Sang;Choi, Yoon-seok;Lee, Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권10호
    • /
    • pp.1381-1391
    • /
    • 2002
  • The solvent sublation using ion pairs of metal-2-naphthoate(2-HNph) and tetrabutyl ammonium ($TBA^+$) ion has been studied for the concentration and determination of ultra trace Bi(III), In(III) and Tl(Ⅲ) ions in water samples. The partition coefficients ($K_p$) and the extraction percentages of 2-HNph and the ion pairs to methyl isobutyl ketone (MIBK) were obtained as basic data. After the ion pair $TBA^+$·M$(Nph)_4^-$ was formed in water samples, the analytes were concentrated by the solvent sublation and the elements were determined by GF-AAS. The pH of the sample solution, the amount of the ligand and counter ion added and stirring time were optimized for the efficient formation of the ion pair. The type and amount of optimum surfactant, bubbling time with nitrogen and the type of solvent were investigated for the solvent sublation as well. 10.0 mL of 0.1 M 2-HNph and 2.0 mL of 0.1 M $TBA^+$ were added to a 1.0 L sample solution at pH 5.0. After 2.0 mL of 0.2%(w/v) Triton X-100 was added, the ion pairs were extracted into 20.0 mL MIBK in a flotation cell by bubbling. The analytes were determined by a calibration curve method with measured absorbances in MIBK, and the recovery was 80-120%.

이성분 용매 추출에 의한 미세조류로 부터의 바이오디젤용 지질 분리 (Extraction of Lipids from Microalgae Using Polar and Nonpolar Bi-solvent Systems)

  • 홍연기;김정배;잉사이먼
    • 한국태양에너지학회 논문집
    • /
    • 제31권6호
    • /
    • pp.66-71
    • /
    • 2011
  • Various single solvents were tested to find the effective solvent for the extraction of algae oil from wet-form Chlorella minutissima. In the case of single solvents, their extractabilities for algae oil were increased with their polarity because the water in wet algae cell is to form a solvent shell around the lipids. Based on these results, the wet-form algae samples were treated with a polar alcohol solvent and then a nonpolar solvent was added in algae residue. In the algae oil extraction by ethanol/n-hexane, total lipid contents were 40-50% and composition of triglyceride in extracted oil was 46.50%. Considering solvent toxicity of conventional solvent mixture such as chloroform and methanol for algae oil extraction, the ethanol/n-hexane system was identified as the effective one for the oil extraction from wet-form Chlorella minutissima.

저농도 유기용제 노출 사업장 근로자의 심혈관질환 위험인자 변화 추적(2008~2012) (Five Year's Follow-up of the Cardiovascular Disease Risk Factors among the Low Level Organic Solvent Exposure Workers)

  • 김미애
    • 한국직업건강간호학회지
    • /
    • 제24권2호
    • /
    • pp.67-75
    • /
    • 2015
  • Purpose: The objective of the present study was to evaluate the effects of occupational exposure to low dose organic solvents on the prevalence of cardiovascular risk factors. Methods: Study design was retrospective cohort study subjected on 191 exposures and 118 controls working in a petrochemical manufacture company. The eight indicators related to CVD risk were followed up for five years from 2008 to 2012. The risk level was compared during the follow up years and subject's characteristics, and the change of risk level were analyzed with repeated measures ANOVA and multiple logistic regression analysis. Results: At the start year 2008, the rate over cutoff value (ROCV) of BS (p<.001) and mean systolic BP (p=.017) were higher in organic solvent exposure group and the others showed no difference. And by the subject's characteristics, odds ratio of the ROCV of BS were higher in organic solvent exposure group and work shift group as 2.51 and 3.07. Comparing the results in 2012 to those of 2008, cardiovascular disease risk in organic solvent exposure group was about 1.5 times higher than that of in the control group. Conclusion: Gradual increase in the CVD risk was identified in organic solvent exposure group. However, the risk might be influenced by shift work and bad behaviors rather than organic solvent exposure.

비휘발성 용매(NMP)를 사용한 인산형 연료전지(PAFC)용 전해질 매트릭스 제조 및 특성 (Preparation and Characteristics of a Matrix Retaining Electrolyte for a Phosphoric Acid Fuel Cell Using Non-volatile Solvent, NMP)

  • 윤기현;양병덕
    • 한국세라믹학회지
    • /
    • 제37권1호
    • /
    • pp.26-32
    • /
    • 2000
  • Preparation and characteristics of a matrix retaining electrolyte using SiC whisker, PES binder, and NMP(n-methyl-2-pyrrolidone) as a non-volatile solvent for a phosphoric acid fuel cell were investigated. The conditions of binder and plasticizer, and the effects of substituting a volatile solvent by a non-volatile solvent were also studied. The minimum amount of the binder was about 17 wt% for the proper bubble pressure and surrounding SiC whiskers. And the maximum amount of the plasticizer was about 10wt% to be fitted into the polymer chain of the binder. The matrix prepared by using a non-volatile solvent needed longer time to dry, and its pore size was smaller compared with that of the matrix prepared by using volatile solvent. The small pore size resulted in decrease of the overall pore volume. The ionic conductivity in the condition of the same thickness was decreased due to decrease of phosphoric acid absorbancy. As the internal resistance of the electrolyte increased, the fuel cell performance slightly decreased.

  • PDF

용매와 용매 첨가제가 고분자 막 구조에 미치는 영향 연구 (The Effect of Solvent and Solvent-Additives of Polymeric Dope Solutions on Membrane Morphology)

  • 원종옥;박철민;강용수;박현채;김은영
    • 멤브레인
    • /
    • 제7권4호
    • /
    • pp.191-198
    • /
    • 1997
  • 기체 투과도 및 기계적 강도가 높은 고분자 비대칭막을 상분리법으로 제조하기 위해 막 제조 메카니즘을 규명하는 연구를 수행하였다. 기본적인 연구가 많이 이루어진 폴리스티렌, 이에 비해 용매와의 관계가 덜 알려져 있는 폴리아미드이미드인 Torlon과 3,3'4,4'-benzophenontetracarboxylic diahmydride와 1,4-phenylene diarnine로 이루어진 폴리이미드를 여러 용매에 녹여 얻어진 캐스팅 용액으로부터 비대칭막을 제조하였다. 용매와 비용매와의 혼합열과 막 구조의 관계로부터, 막의 구조를 결정하는 데에는 용매와 비용매의 혼합열이 크게 영향을 미침을 알 수 있었다. 이 결과로부터 폴리술폰 막의 구조를 용매 첨가제를 사용하여 조절하였다. 캐스팅 고분자 용액이 비용매를 만날 때 용매와 비용매와의 혼합열이 두 물질의 교환 속도에 영향을 미쳐 결국에는 막의 구조에 영향을 미치는 데에 대한 이론적인 고찰도 아울러 수행하였다.

  • PDF

The Influence of Mixed Solvents Volatility on Charge State Distribution of Peptides During Positive Electrospray Ionization Mass Spectrometry

  • Nielsen, Birthe V.;Abaye, Daniel A.;Nguyen, Minh T.L.
    • Mass Spectrometry Letters
    • /
    • 제8권2호
    • /
    • pp.29-33
    • /
    • 2017
  • Understanding the mechanisms that control and concentrate the observed electrospray ionisation (ESI) response from peptides is important. Controlling these mechanisms can improve signal-to-noise ratio in the mass spectrum, and enhances the generation of intact ions, and thus, improves the detection of peptides when analysing mixtures. The effects of different mixtures of aqueous: organic solvents (25, 50, 75%; v/v): formic acid solution (at pH 3.26) compositions on the ESI response and charge-state distribution (CSD) during mass spectrometry (MS) were determined in a group of biologically active peptides (molecular wt range 1.3 - 3.3 kDa). The ESI response is dependent on type of organic solvent in the mobile phase mixture and therefore, solvent choice affects optimal ion intensities. As expected, intact peptide ions gave a more intense ESI signal in polar protic solvent mixtures than in the low polarity solvent. However, for four out of the five analysed peptides, neither the ESI response nor the CSD were affected by the volatility of the solvent mixture. Therefore, in solvent mixtures, as the composition changes during the evaporation processes, the $pK_b$ of the amino acid composition is a better predictor of multiple charging of the peptides.

염산용액에서 Alamine336에 의한 염화 제1, 2구리의 용매추출 (Solvent Extraction of Cuprous and Cupric Chloride from Hydrochloric Acid Solutions by Alamine336)

  • 이만승;이진영
    • 대한금속재료학회지
    • /
    • 제47권5호
    • /
    • pp.297-303
    • /
    • 2009
  • Solvent extraction experiments of cupric and cuprous chloride with Alamine336 have been performed from HCl solution. In order to identify the solvent extraction reaction, distribution diagram of cupric and cuprous species with HCl concentration was obtained by considering complex formation reaction and the activity coefficient of solutes with Pitzer equation. Analysis of the solvent extraction data by graphical method together with the distribution diagram of copper indicated that solvent extraction reaction of copper with Alamine336 depends on HCl concentration. In strong HCl solution of 3 and 5 M, ${CuCl_4}^{2-}$ and ${CuCl_3}^{2-}$ took part in the solvent extraction reaction as Cu(II) and Cu(I), respectively. When HCl concentration was 1 M, ${CuCl_2}^-$ was extracted into the organic phase in the case of Cu(I) while adduct formation between $Cu^{2+}$ and Alamine336 was responsible for the solvent extraction reaction of Cu(II).

Signal amplification by reversible exchange in various alcohol solvents

  • Jeong, Hye Jin;Namgoong, Sung Keon
    • 한국자기공명학회논문지
    • /
    • 제25권4호
    • /
    • pp.64-69
    • /
    • 2021
  • In the developed NMR hyperpolarization techniques, Signal amplification by reversible exchange (SABRE) technique is thought to be a promising method to overcome the low sensitivity of bio-NMR/MRI. Most experiments using SABRE have been done in methanol, which is biologically harmful solvent. Therefore, more biological friendly solvent, such as ethanol can be more appropriate solvent to be applicable in bio-NMR and MRI. As the proof of concept, successful hyperpolarization on pyridine via SABRE is carried out in ethanol and its enhancement factor is calculated to be more than 150 folds. To investigate more about its possibility of hyperpolarization in different alcohol solvents, methanol and propanol are used for SABRE in the same condition. The overall polarization trend in different external magnetic field is similar but its polarization number is decreased with higher molecular weight solvents (the order from methanol to propanol). This result indicates that the efficiency of SABRE is different from solvent system despite its same functional group and similar properties. Higher para-hydrogen concentration, higher partial pressure of para-hydrogen, and deuterated solvent can increase the hyperpolarization in any solvents. With these series of successful SABRE results, future studies on SABRE in more biofriendly environment, on more various solvent systems, and with more substrates are needed and it will be the firm basis for applying the SABRE system on the future bio-NMR/MRI.

Variation of Nutritional and Antioxidant Characteristics of Extract of Lycium barbarum produced by using Different Extraction Processes

  • Ho-Jong You
    • 한국응용과학기술학회지
    • /
    • 제41권2호
    • /
    • pp.520-529
    • /
    • 2024
  • Lycium barbarum extract has a high potential to be developed as a health functional food due to the various health-promoting effects of Lycium barbarum. This study analyzed changes in nutritional and functional components depending on the extraction solvent (purified water and a mixture of purified water and alcohol) and the condition of the sample. The nutritional components (carbohydrates, protein, fat, ash), organic acids, amino acids, total phenolic compounds, and total flavonoids of the extract produced during the extraction process were analyzed. The nutritional composition and functional substances of the extracts showed some differences depending on the type of solvent and the condition of the sample. The amounts of crude protein (7.61%), crude fat (1.63%), carbohydrate (90.22%), and ash (0.54%) of dried Lycium barbarum extract using purified water as a solvent were similar to those of the powder sample extract. The highest content of citric acid was 4.31 mg/mL, similar to the case of acetic acid, when the powder sample used a mixture of purified water and alcohol as a solvent. The highest amino acid content was 357.39 mg/mL when the powder sample was mixed with purified water and alcohol as a solvent. The total amount of phenolic compounds was 686.16 g/L when the powder sample was extracted with a mixture of purified water and alcohol as a solvent. The highest total flavonoid content was 111.32 g/L when the powder sample was extracted with a mixture of purified water and alcohol as a solvent.

고 일광견뢰도 Solvent 염료의 폴리에스터 염색에 관한 연구 (Dyeing of high Light Fastness Solvent Dyes on Polyester Fiber)

  • 최재홍
    • 한국염색가공학회지
    • /
    • 제15권3호
    • /
    • pp.176-184
    • /
    • 2003
  • This research aimed at scrutinizing the dyeability of some solvent dyes on polyester and their light fastness to be exploited as a breakthrough in light fastness where utmost fastness is required such as ultramicrofibers and industrial markets. Dyeability on polyester was mainly evaluated by HT exhaust dyeing according to the general procedure. Light fastness has been tested by a preliminary UV test followed by HT xenon test in compliance with standard SAE J1885, 224 KJ. Fading has been determined quantitatively by evaluating the shade deviation and the strength difference between unexposed and exposed samples by means of CIELab values.