• 제목/요약/키워드: solid content

검색결과 2,127건 처리시간 0.03초

Production of Red Pigments by Monascus purpureus in Solid-state Culture

  • Lee Bum-Kyu;Piao Hai Yan;Chung Wook-Jin
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제7권1호
    • /
    • pp.21-25
    • /
    • 2002
  • To maximize and sustain the productivity of Monascus pigments, various environmental and nutritional parameters, such as the initial moisture content, pH, inoculum size, sample size, and nutrient supplement, that influence pigment production were evaluated in solid-state cultures as follows: initial moisture content, $50\%;$ pH, 6.0; inoculum size $1\;\times\;10^4$ spore cells $(grams\;of\;dry\;solid\;substrate)^{-1};$ sample size, 300 g. All supplementary nutrients (carbon, nitrogen, and mineral sources) added has inhibitory effects on the cell growth and red pigment production. In open tray culture the maximum biomass yield and specific productivity of red pigments were 223 mg DCW $(grams\;of\;initial\;dry\;substrate)^{-1}$ and, $47.6\;OD_{500}\;(DCW\;grams)^{-1}h^h{-1}$ respectively.

하이솔리드 도료용 아크릴계 4원공중합체의 합성 (Synthesis of Acrylic Quarternary Polymers for High-Solid Coatings)

  • 김숭진;양인모;황규현;김명수;함현식;박홍수
    • 한국응용과학기술학회지
    • /
    • 제18권1호
    • /
    • pp.20-28
    • /
    • 2001
  • Acrylic quarternary polymers were synthesized to prepare high-solid coatings. Acrylic resins were synthesized by the radical polymerization of n-butyl acrylate, methyl methacrylate, 2-hydroxyethyl methacrylate and acetoacetoxyethyl methacrylate. From the results of experiment on reaction condition to get high-solid acrylic resins with 70% solid content and viscosity of 1200cps, it was found that di-tert-amyl peroxide among the four types of initiators have lower viscosity and higher degree of conversion. The optinum initiator amount, chain transfer agent, reaction temperature and the dropping time were 5wt%, 4wt%, $150^{\circ}C$ and 5hrs, respectively.

Solid Waste from Swine Wastewater as a Fuel Source for Heat Production

  • Park, Myung-Ho;Kumar, Sanjay;Ra, ChangSix
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권11호
    • /
    • pp.1627-1633
    • /
    • 2012
  • This study was to evaluate the feasibility of recycling the solids separated from swine wastewater treatment process as a fuel source for heat production and to provide a data set on the gas emissions and combustion properties. Also, in this study, the heavy metals in ash content were analyzed for its possible use as a fertilizer. Proximate analysis of the solid recovered from the swine wastewater after flocculation with organic polymer showed high calorific (5,330.50 kcal/kg) and low moisture (15.38%) content, indicating that the solid separated from swine wastewater can be used as an alternative fuel source. CO and NOx emissions were found to increase with increasing temperature. Combustion efficiency of the solids was found to be stable (95 to 98%) with varied temperatures. Thermogravimetry (TG) and differential thermal analysis (DTA) showed five thermal effects (four exothermic and one endothermic), and these effects were distinguished in three stages, water evaporation, heterogeneous combustion of hydrocarbons and decomposition reaction. Based on the calorific value and combustion stability results, solid separated from swine manure can be used as an alternative source of fuel, however further research is still warranted regarding regulation of CO and NOx emissions. Furthermore, the heavy metal content in ash was below the legal limits required for its usage as fertilizer.

Study on the Granulation Behavior of TiO2-PVA Composite Powders Prepared Via Spray Drying Technique

  • Avcioglu, Celal;Ozkal, Burak
    • 한국세라믹학회지
    • /
    • 제56권5호
    • /
    • pp.443-452
    • /
    • 2019
  • In this study, TiO2-polyvinyl alcohol (PVA) composite granules were prepared via spray drying technique. To investigate the effects of solid content and binder/powder ratio in the slurry on the granulation behavior of TiO2 powders, the feed compositions were designed to vary over a wide range. The morphology, actual densities, and average granule size and size distribution of the TiO2-PVA composite granules were characterized by using scanning electron microscopy technique, a gas pycnometer, and an image analyzing program (Image-J), respectively. The results indicate that solid content and the amount of PVA in the feedstock slurry are the dominant factors determining the granule morphology, size, and size distribution of TiO2-PVA composite. Moreover, it was observed that increasing the solid content and the amount of PVA in the slurry improved the granulation process and reduced the granule defects. For the preparation of spherical TiO2-PVA composite granules with the minimum amount of non-granulated powders, the optimized composition of the feedstock slurry was found to be 35 wt.% solid and 3 wt.% PVA.

서울시내 일부 가정식, 외식과 학교급식의 국물음식 나트륨 함량 비교 (Comparison of the sodium content of Korean soup-based dishes prepared at home, restaurants, and schools in Seoul)

  • 박양희;윤지현;정상진
    • Journal of Nutrition and Health
    • /
    • 제53권6호
    • /
    • pp.663-675
    • /
    • 2020
  • 본 연구에서는 서울시내 일부 가정식, 외식, 학교급식에서 국물음식을 수집하여 건더기와 국물 각각의 나트륨 함량을 분석하고 제공 환경에 따른 나트륨 함량을 비교하였다. 가정식, 외식, 학교급식에서 건더기와 국물이 1인 분량에서 차지하는 나트륨 함량은 국 및 탕류와 물김치류에서는 국물이 더 높은 비율을 차지하였으며, 찌개류와 면 및 만두류에서는 국물과 건더기가 비교적 유사한 비율을 보이고 있었다. 특히 1인 분량 내에서 국물이 차지하는 나트륨 함량은 최소 43.7%에서 최대 73.2%까지 높았으며, 이를 바탕으로 국물을 적게 섭취하는 것만으로도 상당량의 나트륨 섭취를 줄일 수 있을 것으로 기대할 수 있다. 100 g 당 나트륨 함량은 전식품에서 가정식과 외식이 학교급식보다 각각 유의하게 높았으며, 건더기에서는 외식이 가정식보다 유의하게 높았고, 국물에서는 가정식과 외식이 학교급식보다 각각 유의하게 높고 외식이 가정식보다 유의하게 높은 것으로 나타났다. 연구 결과를 바탕으로 볼 때, 동일한 종류의 음식이라 할지라도 가정식, 학교급식, 외식에 따라 나트륨 함량의 차이를 보이며 가정식과 학교급식, 가정식과 외식, 학교급식과 외식 간의 동일한 종류의 음식에서 나트륨 함량의 차이가 있어, 건더기 및 국물의 섭취 정도에 따라 실제 섭취하는 나트륨 양이 달라짐을 확인할 수 있었다. 그러므로 보다 정확한 나트륨 섭취량 추정을 위하여 음식이 제공되는 환경 및 섭취 방식에 따라 구분된 데이터베이스를 적용해야 할 것이며, 향후 관련 대규모 연구를 통해 대표성을 가진 데이터베이스의 확충이 필요할 것으로 사료된다.

소규모 도시의 생활폐기물 발생특성 -동해시를 중심으로- (Characteristics of Municipal Solid Wastes Generation in a Small City -For Donghae City-)

  • 김승호;원철희;김병욱;임재명
    • 산업기술연구
    • /
    • 제22권B호
    • /
    • pp.103-108
    • /
    • 2002
  • This research was performed to investigate the generation and physico-chemical characteristics of municipal solid wastes. The results were as follows: i) The generation rate and bulk density were 0.157 kg/cap/d and 147.8 g/L in residential zone, respectively. In non-residential zone, the generation and bulk density were 1.71 kg/cap/d and 85.6 g/L, respectively. Consequently, bulk density of non-residential zone was lower than that of residential zone. ii) The wastes consisted of 90% of combustibles and 10% of incombustibles in residential zone. And the wastes from non-residential zone was composed 85% of combustibles and 15% of incombustibles. iii) Water content was estimated at 47~50% in residential zone and restaurants. In non-residential zone, except restaurants, water content was in the range of 10~30%. Ash content was nearly 10% in overall zone.

  • PDF

당귀, 작약, 천궁, 삼백초, 인진쑥 및 산조인을 첨가한 한방차의 팽화 온도별 고형분 용출율과 Benzo[${\alpha}$]pyrene의 변화 (Changes in Solid Elution Rate and Benzo[${\alpha}$]pyrene During Puffing Temperature of Herbal Tea Containing Angelica gigas, Paeoniae radix, Cnidium officinale, Saururus chinensis, Artemisia capillarisin and Zizyphus vulgaris)

  • 장재선;최미용;오성천
    • 한국응용과학기술학회지
    • /
    • 제31권2호
    • /
    • pp.305-312
    • /
    • 2014
  • 팽화 처리온도를 각각 $140{\sim}220^{\circ}C$로 한 한방차 제품의 성분변화를 분석한 결과는 다음과 같다. 처리온도의 상승에 따라 일부 탄화가 발생하며 조회분 함량이 상대적으로 상승하는 소폭의 변화가 있었고, 조단백질 및 조지방 함량은 거의 변화가 없는 것으로 나타났으며 수분함량은 감소하였다. 한방차의 고형분 용출률은 0.18~0.27%(w/w)로 나타내었는데, 팽화온도가 상승할수록 증가하였다. 고형분의 용출은 온도가 화학적 변화보다 물리적 변화에 의해 식품의 원재료 성분인 탄수화물, 단백질, 지방 등이 천연 상태에서 상호가교 결합이 물리적인 힘으로 어느 정도 파괴되어 성분의 용출이 용이해지기 때문인 것으로 생각된다. 벤조피렌 함량은 0.18~0.24ppb로 처리온도, 원재료에 따라 B(${\alpha}$)P 함량에 차이가 발생한 것으로 나타났다.

Characteristics of Solid-state Fermented Feed and its Effects on Performance and Nutrient Digestibility in Growing-finishing Pigs

  • Hu, Jiankun;Lu, Wenqing;Wang, Chunlin;Zhu, Ronghua;Qiao, Jiayun
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제21권11호
    • /
    • pp.1635-1641
    • /
    • 2008
  • This study investigated the effects of solid-state fermentation of a compound pig feed on its microbial and nutritional characteristics as well as on pig performance and nutrient digestibility. A mixed culture containing Lactobacillus fermentum, Saccharomyces cerevisae and Bacillus subtilis was used for solid-state fermentation and solid-state fermented feed samples were collected on days 0, 1, 2, 3, 5, 7, 10, 15, 20 and 30 for microbial counts and chemical analysis. Lactic acid bacteria increased rapidly during the first three days of fermentation and then slowly declined until day 10 and, thereafter, the counts were maintained at about 6.7 log cfu/g for the duration of the fermentation period. Enterobacteria also increased during the first two days, and then fell below the detectable level of the analysis (3.0 log cfu/g). The pH of the fermentation substrate declined from 6.1 at the start of fermentation to 5.7 by day 30. The water-soluble protein content increased from 8.2 to 9.2% while the concentration of acetic acid increased from 16.6 to 51.3 mmol/kg over the 30-day fermentation. At the end of the 30-day fermentation, the solid-state fermented feed was used in a pig feeding trial to determine its effects on performance and nutrient digestibility in growing-finishing pigs. Twenty crossbred barrows ($14.11{\pm}0.77kg\;BW$) were allotted into two dietary treatments, which comprised a regular dry diet containing antibiotics and a solid-state fermented feed based diet, free of antibiotics. There was no difference due to diet on pig performance or nutrient digestibility. In conclusion, solid-state fermentation resulted in high counts of lactic acid bacteria and low counts of enterobacteria in the substrate. Moreover, feeding a diet containing solid-state fermented feed, free of antibiotics, can result in similar performance and nutrient digestibility in growing-finishing pigs to a regular diet with antibiotics.

환경친화성 하이솔리드 도료의 제조 및 고형분 함량에 따른 도막물성 변화 (Preparation of Environmental Friendly High-Solid Coatings and Their Property Changes with Solid Contents)

  • 박홍수;조혜진;심일우;유혁제;김영찬
    • 한국응용과학기술학회지
    • /
    • 제22권2호
    • /
    • pp.116-122
    • /
    • 2005
  • Room temperature cure type of acryl-urethane coatings with high solid content were prepared in this study. Acrylic resins with 80% solid content were cured with hexamethylene diisocyanate (Desmodure N-3600). The cure time of prepared coatings BEHCC-84 (BEHC-84 : $T_g=0^{\circ}C$) and BEHCC-87 (BEHC-87 : $T_g=30^{\circ}C$), measured by rigid-body pendulum method, was recorded 8.3 hours and 3.8 hours, respectively. Dynamic viscoelastic experiment also revealed the glass transition temperature of BEHCC-84 and BEHCC-87 to be $T_g=40.3^{\circ}C$ and $T_g=43.3^{\circ}C$, respectively. It was found that the adhesion and flexural properties among various propeties of coatings were enhanced by the incorporation of caprolactone acrylate monomer into the acrylic resins.

Influence of Solid Loading on the Granulation of 3Y-TZP Powder by Two-Fluid Spray Drying

  • Jeong, Hyeongdo;Lee, Jong Kook
    • 한국세라믹학회지
    • /
    • 제55권4호
    • /
    • pp.337-343
    • /
    • 2018
  • The influence of solid loading in the slurry composition on the morphology of 3Y-TZP granules fabricated by two-fluid spray drying was investigated for solid contents varying between 30 wt% and 50 wt%. The resulting 3Y-TZP granules showed a sphere-like shape with diameters of $40-70{\mu}m$. However, a donut-like shape and a few cracks were observed on the granule surfaces fabricated using the slurry with 50 wt% solid content. The green density after cold isostatic pressing at 200 MPa was $2.1-2.2g/cm^3$, and a homogeneous fracture surface was obtained by complete destruction of granules. After sintering at $1500^{\circ}C$ for 2 h, all specimens had relative densities of 96.2 - 98.3%. With increasing solid content, the relative density decreased from 98.3% to 96.2%, but the grain size increased from $0.3{\mu}m$ to $0.6{\mu}m$. Highly sinterable zirconia granule powder could be obtained by controlling the slurry composition.