• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.8-14
• /
• 2008

Methane hydrate is crystalline ice-like compounds which consist of methane gas of 99% and over, and the estimated amount of gas contained in hydrates is about 1 trillion carbon Ton. Therefore, they have the potential for being a significant source for natural gas, and 1$m^3$ solid hydrates contain up to 172N$m^3$ of methane gas, depending on the pressure and temperature of production. Such large volumes make natural gas hydrates can be used to store and transport natural gas. In this study, the tests were performed on the formation of methane hydrate by a nozzle. The result showed that utilizing nozzles dramatically reduces the time in hydrate formation, the pressure after the injection is decreased to be approximately 90% of experimental pressurethe, and gas consumption is higher about 3 times than that of subcooling test.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.1
• /
• pp.11-39
• /
• 2018

Tritium and $^{14}C$ are two most important radionuclides released from nuclear facilities to the environment, and $^{14}C$ contributes dominant radiation dose to the population around nuclear power plants. This paper presents an overview of the production, pathway, species and levels of tritium and $^{14}C$ in nuclear facilities, mainly nuclear power plants. The methods for sampling and collection of different species of tritium and $^{14}C$ in the discharge gas from the stack in the nuclear facilities, atmosphere of the nuclear facilities and environment are presented, and the features of different methods are reviewed. The on-line monitoring methods of gaseous tritium and $^{14}C$ in air and laboratory measurement methods for sensitive determination of tritium and $^{14}C$ in collected samples, water and environmental solid samples are also discussed in detailed. Meanwhile, the challenges in the determination and speciation analysis of tritium and $^{14}C$ are also highlighted.

• Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.259-263
• /
• 2012

To isolate an alginate-degrading bacterium, we conducted a single colony isolation using a solid medium containing alginate as the sole carbon source. A marine bacterium Y-4 capable of degrading alginate was isolated from seawater. The strain was identified to be Pseudoalteromonas sp., based on morphological, biochemical, 16S rDNA homology, and phylogenetic analyses. Moreover, Pseudoalteromonas sp. Y-4 exhibited alginate lyase activity in the presence of 4% alginate even though many known alginate-degrading bacteria degrade in the range of 0.5-1% alginate. The optimum culture conditions for the Y-4 strain were 2% alginate, pH 8.0, and 3% NaCl at $30^{\circ}C$. The highest alginate lyase activity was also observed under the same conditions. To our knowledge, this is the first reported isolation of a marine bacterium degrading high concentrations of alginate.

• Journal of Environmental Science International
• /
• v.15 no.10
• /
• pp.975-982
• /
• 2006

This study has been conducted to optimum operating conditions for effective acid fermentation according to OLR(organic loading rate) in the mesophilic and thermophilic acid fermentation process. The results are summarized as follows. In order to obtain reasonable acid fermentation efficiency in performing acid fermentation of food wastes in thermophilic condition, organic loading rate was required below 20 gVS/L.d. As $SCOD_{Cr}/TKN,\;SCOD_{Cr}/T-P$ of thermophilic acid fermented food wastes In organic loading rate 20 gVS/L.d were 18.9, 73.4 respectively, it was possible to utilize as external carbon source for denitrification in sewage treatment plant after solid-liquid separation as well as co-digestion of fermented food wastes and sewage sludge.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2004

The effects of liquid culture conditions and nutrient sources on the formation of protein-binding polysaccharide (PS) in Cordyceps militaris were examined. The formation amount of PS was increased in proportion to the growth rate of mycelium, in case of higher aeration or lower acidity. The optimum growth temperature of the mycelia was 25$^{\circ}C$ for the formation of PS. The optimum carbon source and nitrogen source were glucose and peptone, respectively. The ratio of C/N was optimal with 3％ glucose to 0.5 ％ peptone. The sugar composition in the PS was greatly changed according to the carbon sources. The mycelium of Cordyceps militaris by liquid culture showed a higher electron donating ability than that by solid culture.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.459-463
• /
• 2000

Direct use of negative ions for modification of materials has opened new research such as charging-free ion implantation and new materials syntheses by pure kinetic bonding reactions. For these purposes, a new solid-state ce-sium ion source has been developed in the laboratory scale. In this paper, diamond like carbon(DLC) films were prepared on silicon wafer by a negative cesium ion gun. This system does not need any gas in the chamber; deposition occurs under high vacuum. The ion source has good control of the C- beam energy(from 80 to 150eV). The result of Raman spectrophotometer shows that the degree of diamond-like character in the films, $sp^3$ fraction, increased as ion beam energy increases. The nanoindentation hardness of the films also increases from 7 to 14 GPa as a function of beam energy. DLC films showed ultra-smooth surface(Ra~1$\AA$)and an impurity-free quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.223-234
• /
• 2024

This review explores the potential of pillared bentonite materials as solid acid catalysts for synthesizing diethyl ether, a promising renewable energy source. Diethyl ether offers numerous environmental benefits over fossil fuels, such as lower emissions of nitrogen oxides (NO_x) and carbon oxides (CO_x) gases and enhanced fuel properties, like high volatility and low flash point. Generally, the synthesis of diethyl ether employs homogeneous acid catalysts, which pose environmental impacts and operational challenges. This review discusses bentonite, a naturally occurring alumina silicate, as a heterogeneous acid catalyst due to its significant cation exchange capacity, porosity, and ability to undergo modifications such as pillarization. Pillarization involves intercalating polyhydroxy cations into the bentonite structure, enhancing surface area, acidity, and thermal stability. Despite the potential advantages, challenges remain in optimizing the yield and selectivity of diethyl ether production using pillared bentonite. The review highlights the need for further research using various metal oxides in the pillarization process to enhance surface properties and acidity characteristics, thereby improving the catalytic performance of bentonite for the synthesis of diethyl ether. This development could lead to more efficient, environmentally friendly synthesis processes, aligning with sustainable energy goals.

• The Korean Journal of Mycology
• /
• v.42 no.4
• /
• pp.328-332
• /
• 2014

For mass production of entomopathogenic fungus Beauveria bassiana 149, isolated from moth larva, by two-phase fermentation, we performed selection of carbon and nitrogen sources for liquid culture and examined solid fermentation on carrier, ingredient, temperature, and water content. Spore production with rice powder, corn powder, and starch from sweet potato was higher than that of sucrose and dissolvable starch for liquid fermentation as first-phase fermentation. As a nitrogen source, addition of peptone and yeast powder showed higher spore production than $NaNO_3$, fish powder, and soybean powder. The isolate produced more conidia in sawdust + wheat bran + corn powder, sawdust + wheat bran and rice shell + wheat bran as carrier and ingredient than vermiculite as carrier. Conidia production of B. bassiana 149 in solid-phase fermentation was twice higher at 30 than 20. Conidia yield was higher at 60% and 70% water content ($26.9{\times}10^8$ and $38.6{\times}10^8conidia/g$) than 40% and 50% ($13.9{times}10^8 $and $11.6{\times}10^8conidia/g$), respectively.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.789-798
• /
• 2020

The effect of Chitosan (CS), Carbon Nanotube (CNT) and hybrid (CS-CNT) fillers on the natural frequency of drilled composite plate is investigated by experimentally in this study. The numerical validation is also made with a program based on Finite Element Method (SolidWorks). Nine types filled and one neat composite plates are used in the study. The fillers ratios are 1% CS, 2% CS, 3% CS, 0.1% CNT, 0.2% CNT, 0.3% CNT, 1% CS+0.3% CNT, 2% CS+0.3% CNT, 3% CS+0.3% CNT. The specimens cut to certain sizes by water jet from the plates 400 mm × 400 mm in dimensions. Some of them are drilled in certain dimensions with drill. The natural frequency of each specimen is measured by the vibration test set up to determine the vibration characteristic. The vibration test set up includes an accelerometer, a current source power unit, a data acquisition card and a computer. A code is written in Matlab^® program for the signal processing. The study are investigated and discussed in four main points to understand the effect of the fillers on the natural frequency of the composite plate. These are the effect of fillers contents and amounts, orientation angles of fibers, holes numbers and holes sizes. As results, the natural frequency of the plate with 1% CS and 0.1% CNT hybrid filler is lower than those of the plates with other fillers ratios for 45° orientation angle. Besides, in the composite plate with 0° orientation angle, the natural frequency increases with increasing the filler ratio. Moreover, the natural frequency increases until a certain hole number and then it decreases. Furthermore, the natural frequency is not affected until a certain hole diameter but then it decreases.