Browse > Article
http://dx.doi.org/10.12989/scs.2020.35.6.789

Effect of chitosan/carbon nanotube fillers on vibration behaviors of drilled composite plates  

Demir, Ersin (Pamukkale University, Mechatronics Engineering Department, Kinikli Campus)
Callioglu, Hasan (Pamukkale University, Mechatronics Engineering Department, Kinikli Campus)
Sayer, Metin (Pamukkale University, Mechatronics Engineering Department, Kinikli Campus)
Kavla, Furkan (Pamukkale University, Graduate School of Natural and Applied Sciences, Kinikli Campus)
Publication Information
Steel and Composite Structures / v.35, no.6, 2020 , pp. 789-798 More about this Journal
Abstract
The effect of Chitosan (CS), Carbon Nanotube (CNT) and hybrid (CS-CNT) fillers on the natural frequency of drilled composite plate is investigated by experimentally in this study. The numerical validation is also made with a program based on Finite Element Method (SolidWorks). Nine types filled and one neat composite plates are used in the study. The fillers ratios are 1% CS, 2% CS, 3% CS, 0.1% CNT, 0.2% CNT, 0.3% CNT, 1% CS+0.3% CNT, 2% CS+0.3% CNT, 3% CS+0.3% CNT. The specimens cut to certain sizes by water jet from the plates 400 mm × 400 mm in dimensions. Some of them are drilled in certain dimensions with drill. The natural frequency of each specimen is measured by the vibration test set up to determine the vibration characteristic. The vibration test set up includes an accelerometer, a current source power unit, a data acquisition card and a computer. A code is written in Matlab® program for the signal processing. The study are investigated and discussed in four main points to understand the effect of the fillers on the natural frequency of the composite plate. These are the effect of fillers contents and amounts, orientation angles of fibers, holes numbers and holes sizes. As results, the natural frequency of the plate with 1% CS and 0.1% CNT hybrid filler is lower than those of the plates with other fillers ratios for 45° orientation angle. Besides, in the composite plate with 0° orientation angle, the natural frequency increases with increasing the filler ratio. Moreover, the natural frequency increases until a certain hole number and then it decreases. Furthermore, the natural frequency is not affected until a certain hole diameter but then it decreases.
Keywords
composite plate; carbon nanotube; chitosan; filler; vibration;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Vincent, J.F.V. and Hillerton, J.E. (1979), "The tanning of insect cuticle - A critical review and a revised mechanism", J. Insect. Physiol., 25(8), 653-658. https://doi.org/10.1016/0022-1910(79)90115-X.   DOI
2 Wambua, P. (2003), "Natural fibres: can they replace glass in fibre reforced plastics?", Compos. Sci. Technol., 63(9), 1259-1264. https://doi.org/10.1016/S0266-3538(03)00096-4.   DOI
3 Wan, Y., Xiao, B., Dalai, S., Cao, X. and Wu, Q. (2009), "Development of polycaprolactone/chitosan blend porous scaffolds", J. Mater. Sci.-Mater. M., 20(3), 719-724. https://doi.org/10.1007/s10856-008-3622-z.   DOI
4 Wang, S.F., Shen, L., Zhang, W.D. and Tong, Y.J. (2005), "Preparation and mechanical properties of chitosan/carbon nanotubes composites", Biomacromolecules., 6(6), 3067-3072. https://doi.org/10.1021/bm050378v.   DOI
5 Wu, G., Huang, J. and Li, W. (2017), "Preparation of chitosan- graphene nanosheet composites with enhanced electrochemical and mechanical properties", J. Appl. Polym. Sci., 134(29), 1-7. https://doi.org/10.1002/app.45104.
6 Yamamoto, N., Villoria, R.G. de and Wardle, B.L. (2012), "Electrical and thermal property enhancement of fiber- reinforced polymer laminate composites through controlled implementation of multi-walled carbon nanotubes", Compos. Sci. Technol., 72(16), 2009-2015. https://doi.org/10.1016/j.compscitech.2012.09.006.   DOI
7 Zhang, Y. and Huang, S. (2016), "Significant improvements in the mechanical properties of chitosan functionalized carbon nanotubes/epoxy composites", R.S.C. Adv., 6, 26210-26215.
8 Ahmed, J., Mulla, M., Arfat, Y.A. and Thai, T.L.A. (2017), "Mechanical, thermal, structural and barrier properties of crab shell chitosan/graphene oxide composite films", Food Hydrocolloid., 71, 141-148. https://doi.org/10.1016/j.foodhyd.2017.05.013.   DOI
9 Albooyeh, A.R. (2019), "The effect of addition of multiwall carbon nanotubes on the vibration properties of short glass fiber reinforced polypropylene and polypropylene foam composites", Polym. Test., 74, 86-98. https://doi.org/10.1016/j.polymertesting.2018.12.014.   DOI
10 Al-Sagheer, F. and Muslim, S. (2010), "Thermal and mechanical properties of chitosan/$SiO_2$ hybrid composites", J. Nanomater., 2010, 1-7.   DOI
11 Chaudhari, V.K., Shegokar, N.L. and Lal, A. (2017), "Nonlinear free vibration analysis of elastically supported carbon nanotube-reinforced composite beam with the thermal environment in non-deterministic framework", Curved Layer. Struct., 4, 85-103. https://doi.org/10.1515/cls-2017-0007.   DOI
12 Al-Waily, M. and Ntayeesh, T.J. (2017), "Influence of multi wall carbon nanotube (MWCNTs) reinforcement on the mechanical properties and vibration behavior of composite plates", Mech. Power Eng., 1st International Conference Recent Trends in Engineering Science and Sustainability (IJRTESS), 215-488.
13 Baur, J. and Silverman, E. (2007), "Challenges and opportunities in multifunctional nanocomposite structures for aerospace applications", MRS Bull., 32(4), 328-334. https://doi.org/10.1557/mrs2007.231   DOI
14 Breuer, O. and Sundararaj, U. (2004), "Big returns from small fibers: A review of polymer/carbon nanotube composites", Polym. Compos., 25(6), 630-645. https://doi.org/10.1002/pc.20058.   DOI
15 Chang, T.P. (2017), "Nonlinear vibration of single-walled carbon nanotubes with nonlinear damping and random material properties under magnetic field", Compos. Part B-Eng., 114, 69-79. https://doi.org/10.1016/j.compositesb.2017.01.064.   DOI
16 Chakrapani, S.K., Barnard, D.J. and Dayal, V. (2016), "Nonlinear forced vibration of carbon fiber/epoxy prepreg composite beams: theory and experiment", Compos. Part B-Eng., 91, 513-521. https://doi.org/10.1016/j.compositesb.2016.02.009.   DOI
17 Callioglu, H., Sayer, M. and Demir, E. (2011), "Impact behavior of particles filled-glass/polyester composite plates", Polym. Compos., 32(7), 1125-1133. https://doi.org/10.1002/pc.21130.   DOI
18 Garcia, E.J., Wardle, B.L. and Hart, A.J. (2008), "Joining prepreg composite interfaces with aligned carbon nanotubes, Compos. Part A, 39(6), 1065-1070. https://doi.org/10.1016/j.compositesa.2008.03.011.   DOI
19 Demir, E. (2016), "A study on natural frequencies and damping ratios of composite beams with holes", Steel Compos. Struct., 21(6), 1211-1226. https://doi.org/10.12989/scs.2016.21.6.1211.   DOI
20 Dumitriu, S. (2002), Polymeric Biomaterials, 2nd Ed., Marcel Dekker Inc., New York, USA.
21 Gürkan, I. and Cebeci, H. (2016), "An approach to identify complex CNT reinforcement effect on the interlaminar shear strength of prepreg composites by Taguchi method", Compos. Struct., 141, 172-178. https://doi.org/10.1016/j.compstruct.2016.01.043.   DOI
22 Oh, D.X. and Hwang, D.S. (2013), "A biomimetic chitosan composite with improved mechanical properties in wet conditions", Biotechnol. Prog., 29(2), 505-512. https://doi.org/10.1002/btpr.1691.   DOI
23 Joshi, S.C. and Dikshit, V. (2011), "Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion", J. Compos. Mater., 46(6), 665-675. https://doi.org/10.1177/0021998311410472.   DOI
24 Kavla, F. (2019), "Mechanical behaviors of composite leaf springs with additive", Pamukkale University, Graduate School of Natural and Applied Sciences, MSc. Thesis.
25 Kwon, D.J., Choi, J.Y., Shin, P.S., DeVries, K.L. and Park, J.M. (2016), "Improvement in mechanical properties of recycled GF prepreg with CNT reinforced composites using a spray coating method", Adv. Compos. Mater., 25(6), 515-524. https://doi.org/10.1080/09243046.2016.1145876.   DOI
26 Liu, J., Liu, S., Chen, Y., Zhang, L., Kan, J. and Jin, C. (2017), "Physical, mechanical and antioxidant properties of chitosan films grafted with different hydroxybenzoic acids", Food Hydrocolloid., 71, 176-186. https://doi.org/10.1016/j.foodhyd.2017.05.019.   DOI
27 Miserez, A., Schneberk, T., Sun, C., Zok, F.W. and Waite, J.H. (2008), "The transition from stiff to compliant materials in squid beaks", Sci., 319 1816-1819.   DOI
28 Refiee, M., Nitzche, F. and Labrosse, M.R. (2018), "Effect of functionalization of carbon nanotubes on vibration and damping characteristics of epoxy nanocomposites", Polym. Test., 69, 385-395. https://doi.org/10.1016/j.polymertesting.2018.05.037.   DOI
29 Sridharan, V., Raja, T. and Muthukrishnan, N. (2016), "Study of the effect of matrix, fibre treatment and graphene on delamination by drilling jute/epoxy nanohybrid composite", Arab. J. Sci. Eng., 41, 1883-1894. https://doi.org/10.1007/s13369-015-2005-2.   DOI
30 Uragami, T. and Tokura, S. (2006), Material Science of Chitin and Chitosan, Kodansha Springer, Berlin Heidelberg, Germany.