• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.886-890
• /
• 2014

The properties of magnetic material of Nd-Fe-B are highly affected by various factors such as particle size, magnetic anisotropy, phase purity and crystal structure. Incorporation of excess neodymium was carried out in various percentages so that it will adjust the proportion of neodymium in the host crystal after reduction treatment and finally help to improve magnetic property of a material. The interdiffusion of Nd-Fe and boron was studied for various compositions and their effect on magnetic property was understood with theoretical concepts. The factors such as amount of hard and soft phase in the reduction treated product is also responsible for the possible exchange coupling between hard and soft phase magnets for better magnetic properties.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.125-128
• /
• 2000

In this paper, the handoff margins are analyzed using the propagation attenuation which is modeled as a product of the fourth power of the distant and a log-normal random variable whose standard deviation is 8 ㏈. The effect of handoff techniques on cell coverage for CDMA system are shown that soft handoff increases cell coverage relative to hard handoff. When the cell radius extends 5-10 % and the outage probability is 10 %, the relative cell coverage area is extended 3.22 ㏈-3.99 ㏈ and 2.55 ㏈-2.85 ㏈ with power control and without power control, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제15권1호
• /
• pp.1-6
• /
• 2014

Self-exciting electronic ballast, of small size, and low cost, and high power, with no stroboscopic effect, no noise, is widely used in the general lighting market. This paper describes the cause of high switching loss of self-exciting electronic ballast, based on its operational principle; then, to reduce the switch temperature and increase the reliability of the product, the drive circuit has been improved, to achieve soft-switching. The theory analysis, simulation and experimental result prove the feasibility and compatibility of this new method in practice. Finally, the design procedure and winding method of the self-exciting current transformer are introduced.

• 한국의류학회지
• /
• 제39권4호
• /
• pp.505-516
• /
• 2015

This study investigated difference of product interest and its relation to consumers' innate innovativeness according to gender as well as compared the perceptive construct of products between male and female consumers. A survey involving male and female college students was conducted in the Daegu and Gyeongbuk areas in December 2013. Subsequently, 400 responses were analyzed using descriptive statistics, correlations, independent sample t-test, reliability analysis, ANCOVA, and multidimensional scaling. Among 45 products, male respondents showed a significantly high degree of interest over 12 categories such as watches, desktop computers, cars, sports products, and video games compared to females. The female sample showed a significantly high degree of interest for 29 product categories such as clothing, movies, skin care shops, cosmetics, eating-out, teeth whitening, coffee, cameras, and performances compared to males. Innovative male consumers were interested in traveling, movies, clothing, eating-out, running shoes, and wallets; however, female consumers' innovativeness was significantly related to previously determined items of interest. Two dimensions explaining the male consumers' products perception construct were 'hard versus soft' and 'usual versus special'. Instead, female consumers' were 'special versus usual' and 'expressive versus functional'.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.97-106
• /
• 2003

At present, tendency of ERP(Enterprise Resource Planning) enterprises is that many ERP enterprises from abroad are rushing into capture of small and medium enterprises at home actively. SAP Korea and Korean Oracle have already showed their new product targeting domestic market of small or medium standing enterprise, and more, even MS(Micro Soft) also rushes into this market in earnest. The domestic business circle of ERP should prepare countermeasure by raising the perfection of product and having good command of minute marketing strategy to survive from aggressive strategy of SMB market. In addition, about the computerization of main affairs of business, ordering developing process was general that developing staffs analysed the affairs of each department that needed computerization and construct according to the operation process by using different tools, but condition is changing that businesses themselves are purchasing business application package from expert soft program enterprise and construct. Therefore, in this study, I try to grasp the problem of management, and define a new process that can help for more efficient management by making it an object producing and management module of enterprise 'K' that is one of domestic small and medium enterprise and that is operating ERP at present. As well, through the analysis of affair related producing, we are aiming to prepare for establishment of target, its range, and making the standard of result evaluation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.535-538
• /
• 2008

Insert-injection molding can inject two different materials or two colors in the same mold and process. If this injection process use, product has ability because the base part maintain strength and specified part can inject soft-material. It makes the cost down by single operation automatically for saving wages. In this paper, we designed double-injection mold for automobile remote control to inject secondary using this part as insert after inject external appearance of product. CAE analysis was progressed gate location and runner size as variable and analysis result is reflected in mold design process. As a result, it could solved badness that is generated at the conventional mold. Additionally, cost is downed by reducing loss of runner as well as could omit painting process because surface of finished product is improved through new mold.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.483-489
• /
• 2010

본 연구에서는 화상분석(image analysis)에 기반한 소프트 센서를 설계하고, 이를 색상-질감 특성을 가진 제품의 외관품질 자동분류에 적용하였다. 색상과 질감(texture)을 동시에 가진 화상을 분석하기 위해 다중해상도 다변량 화상분석(Multiresolutional Multivariate Image Analysis, MR-MIA) 기법을 이용하였으며, 자동 분류를 위한 감독 학습법(supervised learning)으로는 Fisher의 판별분석(Fisher's discriminant analysis)을 사용하였다. 잠재변수법의 하나인 Fisher의 판별분석을 사용하였기 때문에, 제품의 외관을 서로 다른 불연속적인 부류로의 분류할 수 있을 뿐 아니라, 연속적인 외관 변화를 일관적이고 정량적으로 추정함은 물론, 외관의 특성 해석 또한 가능하였다. 이 방법은 인조대리석 제조 공정에서 중간 및 최종 제품의 외관 품질을 자동으로 분류하는 데에 성공적으로 적용되었다.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.216-223
• /
• 2012

Bill of material (BOM), which structurally represents the relation among parts constructing a product, is usually created when enterprises start to develop a new product. And it is shown as various types of BOM according to business needs and usage such as eBOM (engineering BOM), gBOM (green BOM), mBOM (manufacturing BOM), pBOM (process BOM), etc. eBOM, generally called BOM and created in the design stage of the new product, includes the drawing information of parts in the view of product function. eBOM is extended to gBOM adding the material information of parts to cope with international regulations for environment. eBOM is transformed to mBOM, which includes manufacturing sequence of parts and adds some parts required to fabricate parts and to assemble the product. mBOM is also extended to pBOM adding the process information of each part and additional assembly processes. This study introduces the concept of multi-BOM covering eBOM, gBOM, mBOM and pBOM, and proposes an advanced way to manage product data using multi-BOM system. The multi-BOM system proposed is to manage their relations using transformation function of BOM and master information of all BOMs.

• 한국의류학회지
• /
• 제37권2호
• /
• pp.213-223
• /
• 2013

This study presents the process of fashion item development with velvet through creative thinking methods. Creativity is one of the most important requirements for a successful job career and education enhancing creative thinking is needed in the area of fabrication, product design, and marketing strategy development. Velvet was selected as a research stimulus because it is a luxurious fabric with various differential properties such as a soft touch, unique luster, excellent drapability, and fine physical properties. The research methodology included creative thinking methods review, the selection of the tools, idea sourcing and listing, sequential idea evaluation and sample product making. After review of the various creative thinking methods, a combination method and forced connection method were employed as research tools to confirm the usefulness of creative thinking training because of their independence of use and application simplicity. A total of 12 university students participated as subjects in this research. After some training, each student derived ten ideas for velvet products that utilized a combination method and forced connection method. A total of 120 ideas were evaluated for novelty, technical possibility, practicality, and marketability; subsequently, 24 ideas were adopted and developed as sample products. The effectiveness of creativity education in fabrication and product design classes was verified through the whole process of product planning.

• 산학경영연구
• /
• 제11권
• /
• pp.101-122
• /
• 1998

이 연구는 다차원적 관점에 따라 개발된 관여척도를 적용하여 제품관여가 소비자 구매과정에 미치는 영향을 분석하였다. 실증자료 분석결과, 제품별 분석에서 보다 소비자별 분석에서 '구매전 정보탐색'을 비롯한 구매과정의 행동성향이 관여수준에 더 강하게 의존되는 것으로 나타났다. 이는 관여수준이 소비자선택행동의 변화를 설명해주는 구조물이며, 제품관여는 소비자가 제품에 관련되는 정도를 반영하는 변수로 인식되어야 함을 시사한다. 동시에, 관여가 소비자행동에 미치는 영향의 이해와 예언에는 관여수준과 함께 관여의 관저에 대한 이해가 필요하다는 시사를 얻었다.