Solder resist ink와 회로표면과의 밀착력 향상을 위해 사용되는 soft etching 제의 기본 조성으로 과산화수소와 황산을 선정하고 inhibitor, 계면활성제, 안정제를 첨가하여 에칭 속도 $0.7{\sim}1{\mu}m/min$, 표면조도(Ra)값 $0.5{\sim}0.6{\mu}m$을 만족시키는 soft etching 제 개발을 위한 연구를 하였다. Inhibitor로는 butyl amine, cyclohexyl amine, 5-aminotetrazole (5-Azol)을 첨가하였으며 계면활성제로는 polyethylene glycol (PEG), polyethylene imine (PEI), piperidine을 안정제로는 butyl alcohol, isopropanol, 인산을 첨가하여 각각의 첨가제가 에칭 속도 및 표면조도에 미치는 영향을 비교 분석하였다. 본 연구 결과 과산화수소 3% 황산 4%에 5-Azol 500 ppm, PEI 600 ppm, 인산 10 ppm 첨가 시 $0.7~1{\mu}m/min$을 만족시키는 에칭속도와 가장 좋은 표면조도를 갖는 것을 확인하였으며 solder test 결과 solder resist ink의 들뜸 현상이 발생하지 않는 것을 확인하였다.
We observed that static electricity has an influence on the etching unformity of dry etching process. When the static electricity was applied from-200[V]to-1000[V] on glass substrates, the etching rate uniformity was changed to 1.5%-15%. In this experiment, the soft X-ray to neutralize static electricity was adopted as ore of neutralization methods. As an experimental result, soft X-ray irradiation improved neutralization capability on the surface of LCD glass substrate within the short time, about 15-30sec. The difference of etching rate uniformity was below 0.5%.
PCB 제조에서 photoresist와 Copper Clad Laminate(CCL)의 구리표면과의 부착력을 항상시키기 위하여 사용되는 soft etching제를 제조하기 위하여 과산화수소 사용을 배제하고, 유기산과 유기과산화물을 이용하여 산의 종류, 농도, 에칭시간 등에 따른 구리표면의 에칭속도, 표면 조도, 및 오염도 등을 조사하였다. 또한 에칭 후의 표면의 얼룩을 제거하기 위한 안정제의 최적 배합 및 농도도 확립하였다. 본 연구 결과 유기산의 종류 중에서는 아세트산이 초기 구리 에칭속도가 가장 빨랐으며, 농도가 0.04 M이었을 때 $0.4{\mu}m/min$이였다. 유기과산화물인 APS의 농도는 높을수록 에칭속도가 가장 빨랐으나, 표면 오염이 심각하였다. 안정제 용액의 조성도 표면 오염도에 큰 영향을 주었다. 결과적 0.04 M 아세트산, 0.1M APS에 4 g/L의 안정제(ST-1)를 첨가한 에칭액의 경우 $0.37{\mu}m/min$의 에칭속도와 표면오염이 전혀 없으며, 표면 조도도 가장 우수하였다. 즉, CCL과 photoresist와 접착력을 향상시킬 수 있을 것으로 판단된다.
Kim, Song-Kwan;Yun, Hae-Sang;Hong, Mun-Pyo;Park, Sun-Woo
한국정보디스플레이학회:학술대회논문집
/
한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
/
pp.77-78
/
2000
We verified the charged static electricity on LCD glass influences upon the etching uniformity of dry etching process by plasma. In the TFT-LCD manufacturing process, we mainly paid attention to eliminate the static electricity for TFT reliability. The static electricity caused the serious ununiformity of etching surface profile and etching rate in the dry etch process. Through our experiment on the made static electricity from -200V to -1000V, it was confirmed that the static electricity on LCD glass caused the etching rate variation of $1.5%{\sim}15%$. We recommend the etching process equipment for LCD manufacturing have to establish the soft X-ray exposure module system for eliminating the static electricity inside the loading and unloading chamber.
나노 결정립 구조를 갖는 Fe-Al-O 연자성 산화막을 이온빔 에칭법으로 에칭하면서 연자기적 특성의 변화를 조사하였다. 두께가 감소할수록 보자력과 각형비가 증가하고 AFM 으로 조사한 표면굴곡도 증가하는 것으로 보아 결정립의 크기가 증가하는 것으로 판단된다. 이러한 현상은 비정질을 열처리한 나노결정립 연자성 재료와 다르게 성막하는 과정의 온도 상승에 의한 결정성장이 원인으로 판단된다. 따라서 우수한 연자성 박막을 제조하기 위해서는 두께 및 성막시간 등 최적 제조조건을 찾아야 한다. 마그네트론 스퍼터링법으로 제조된 Fe-Al-O 산화막의 경우 900 nm 이상에서 보자력이 1 Oe 이하인 연자성 박막을 얻을 수 있었다.
Cho, Hyunjin;Lee, Changhyup;Oh, In Seoup;Park, Sungchan;Kim, Hwan Chul;Kim, Myung Jong
Carbon letters
/
제13권4호
/
pp.205-211
/
2012
Methanol as a carbon source in chemical vapor deposition (CVD) graphene has an advantage over methane and hydrogen in that we can avoid optimizing an etching reagent condition. Since methanol itself can easily decompose into hydrocarbon and water (an etching reagent) at high temperatures [1], the pressure and the temperature of methanol are the only parameters we have to handle. In this study, synthetic conditions for highly crystalline and large area graphene have been optimized by adjusting pressure and temperature; the effect of each parameter was analyzed systematically by Raman, scanning electron microscope, transmission electron microscope, atomic force microscope, four-point-probe measurement, and UV-Vis. Defect density of graphene, represented by D/G ratio in Raman, decreased with increasing temperature and decreasing pressure; it negatively affected electrical conductivity. From our process and various analyses, methanol CVD growth for graphene has been found to be a safe, cheap, easy, and simple method to produce high quality, large area, and continuous graphene films.
The direct-current electroetching of high purity aluminum in hot aqueous-chloride solution produces a high density of micrometer-wide tunnels whose walls are made up of the {100} planes and penetrate aluminum in the <100> directions at rates of micrometer per second. In the process of the alternating-current pitting of aluminum, cathodic polarization plays an important role in the nucleation and growth of the pits during the subsequent polarization. The direct-current tunnel etching and alternating-current etching of aluminum are basically related to the formation of poorly crystallized or amorphous passive films. If the passive film forms on the wall, a natural misfit exists between the film and the aluminum substrate, which in turn gives rise to stress in both the film and the substrate. Even though the amorphous films do not have directed properties, their stresses are influenced by the substrate orientation. The films on elastically soft substrate are likely to be less stressed and more stable than those on elastically hard substrate. The hardest and softest planes of aluminum are the {111} and {100} planes, respectively. Therefore, the films on the {111} substrates are most likely to be attacked, and those on the {100} substrates are least likely to be attacked. For the tunnel etching, it follows that the tunnel walls tend to consist of the {100} planes. Meanwhile, the tunnel tip, where active corrosion takes place, tend to be made of four closely packed {111} planes in order to minimize the surface energy, which gives rise to the <100> tunnel etching.
무전해 PCB 도금 공정 수세액을 분리막으로 처리하여 투과수는 공업용수로 재사용하고 유가금속인 금(Au)을 회수하는 방법에 관하여 연구하였다. 역삼투 분리막 테스트 셀을 이용하여 수세액 처리에 적합한 분리막을 선정하였으며 scale-up을 위한 나권형 모듈 투과 실험을 실시하였다. 먼저, (주)새한에서 생산되는 RO-TL(tap water, low pressure), RO-BL(brackish water, low pressure), RO-normal(for water purifier)막으로 투과실험하였으며 그 중 RO-TL막이 soft etching, 촉매 및 Ni 수세액 처리에 우수한 것으로 판명되었다. 따라서 RO-TL막으로 제작한 나권형 가정용 정수기 모듈로 7bar, $25^{\circ}C$에서 scale-up 실험을 수행하였다. Au수세액의 투과 유속은 약 30 LMH로서 가장 높았으나 Au 제거율이 80% 미만이었다. Pd, Ni 및 soft etching 수세액의 투과유속은 각각 약 22, 17, 10 LMH 정도이며 Pd의 제거율은 85% 이상, Ni 및 Cu 제거율은 97% 이상이었다. 또한 Au, Ni 및 Cu 이온이 함유된 수세액 중 유가금속인 Au를 선택적으로 회수하기 위하여 NF막을 사용하였다. Au수세액 중 Ni 및 Cu 이온은 대부분 제거되었으며 투과액 중에 Au이온이 81.9% 존재하였고 계속하여 RO-TL막으로 Au를 농축 회수하였다. 마지막으로 4"직경의 NF 및 RO-TL 나권형 모듈을 연속적으로 사용하여 Au를 효과적으로 회수할 수 있음을 재확인하였다.인하였다.
A nanopatterning technique was proposed and demonstrated for low cost and mass productive process using the scanning probe lithography (SPL) and soft lithography. The nanometer scale structure is fabricated by the localized generation of oxide patterning on the H-passivated (100) silicon wafer, and soft lithography was performed to replicate of nanometer scale structures. Both height and width of the silicon oxidation is linear with the applied voltagein SPL, but the growth of width is more sensitive than that of height. The structure below 100 nm was fabricated using HF treatment. To overcome the structure height limitation, aqueous KOH orientation-dependent etching was performed on the H-passivated (100) silicon wafer. Soft lithography is also performed for the master replication process. Elastomeric stamp is fabricated by the replica molding technique with ultrasonic vibration. We showed that the elastomeric stamp with the depth of 60 nm and the width of 428 nm was acquired using the original master by SPL process.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.