• 제목/요약/키워드: snow modeling

검색결과 37건 처리시간 0.022초

폭우.폭설 시 침수 정보 전달과 통행시간 관계 연구 -에이전트 기반 모델을 활용하여- (A Study on Relationships between Travel Time and Provision of Road Inundation Information in Heavy Rain and Snow using an Agent-based Simulation Model)

  • 나유경;이승호;조창현
    • 한국경제지리학회지
    • /
    • 제16권2호
    • /
    • pp.262-274
    • /
    • 2013
  • 최근 도시에 발생하는 폭우 폭설 등의 극단적인 기상현상은 대규모 재난으로 이어지며 사회적인 문제가 되고 있다. 본 연구는 극단적인 강수현상 발생 시 통행효율성을 증대시켜 도시 지역 내 경제적 손실을 최소화할 수 있는 최적의 침수 정보 전달 시나리오를 선정하고자 한다. 이를 위해 서울시 서초구 서초동 일대를 사례지역으로 NetLogo 툴킷을 활용한 모델을 작성하여, 극단적인 강수 발생 시 정보전달 시나리오별 통행시간의 시뮬레이션을 수행하였다. 시뮬레이션에 따르면, 노면에 습기가 있거나 강설량 20mm 미만인 시나리오에서는 20~40%의 운전자에게, 강설량 20mm 이상의 폭우가 발생한 시나리오에서는 40~60%의 운전자에게 도로통제의 정보를 전달하는 것이 효과적이라는 결과가 각각 도출되었다.

  • PDF

Different Climate Regimes Over the Coastal Regions of the Eastern Antarctic Ice Sheet

  • Cunde, Xiao;Dahe, Qin;Zhongqin, Li;Jiawen, Ren;Allison, Ian
    • Ocean and Polar Research
    • /
    • 제24권3호
    • /
    • pp.227-236
    • /
    • 2002
  • For ten firn cores, from both the eastern and the western side of Lambert Glacier basin (LGB), snow accumulation rate and isotopic temperature were measured far the recent 50 years. Results show that snow accumulation for five cores over the eastern side of LGB (GC30, GD03, GD15, DT001, and DT085) at Wilks Land and Princess Elizabeth Land increases, whereas it decreases at the western side (Core E, DML05, W200, LGB 16, and MGA) at Dronning Maud Land, Mizuho Plateau and Kamp Land. For the past decades, the increasing rate was $0.34-2.36kg\;m^{-2}a^{-1}$ at the eastern side and the decreasing rate was $-0.01\;-\;-2.36kg\;m^{-2}\;a^{-1}$ at the western side. Temperatures at the eastern LGB were also increased with the rate of $0.02%o\;a^{-l}$. At the western LGB it was difficult to see clear trends, which were confirmed by Instrumental temperature records at coastal stations. Although statistic analysis and modeling results display that both surface temperature and accumulation rate has increased trends in Antarctic ice sheet during 1950-2000, the regional distributions were much more different for different geographic areas. We believe that ice-core records at Wilks Land and Princess Elizabeth Land reflect the real variations of SST and moisture change in the southern India Ocean. For the Kamp Land and Dronning Maud Land, however circulation pattern was different, by which the climate was more complicated. The International Trans-Antarctic Scientific Expedition (ITASE) aimed to reveal an overall spatial pattern of climate change over Antarctic ice sheet for the past 200 years. This study points the importance of continental to regional circulation to annual-decadal scale climate change in Antarctica.

극저온 $CO_2$ 세정과정 시 미세오염물의 탈착 메커니즘 연구 (A dynamic analysis on minute particles' detachment mechanism in a cryogenic $CO_2$ cleaning process)

  • 석종원;이성훈;김필기;이주홍
    • 반도체디스플레이기술학회지
    • /
    • 제7권4호
    • /
    • pp.29-33
    • /
    • 2008
  • Rapid increase of integrity for recent semiconductor industry highly demands the development of removal technology of contaminated particles in the scale of a few microns or even smaller. It is known that the surface cleaning technology using $CO_2$ snow has its own merits of high efficiency. However, the detailed removal mechanism of particles using this technology is not yet fully understood due to the lack of sophisticated research endeavors. The detachment mechanism of particles from the substrates is known to be belonged in four types; rebounding, sliding, rolling and lifting. In this study, a modeling effort is performed to explain the detachment mechanism of a contaminant particle due to the rebounding caused by the vertical collision of the $CO_2$ snow. The Hertz and Johnson-Kendall-Roberts(JKR) theories are employed to describe the contact, adhesion and deformation mechanisms of the particles on a substrate. Numerical simulations are followed for several representative cases, which provide the perspective views on the dynamic characteristics of the particles as functions of the material properties and the initial inter-particle collision velocity.

  • PDF

인사관리와 사업전략 간의 결합패턴과 성과와의 관계에 대한 연구 (The Effect of Combination Patterns between HRM and Business Strategy on Performance)

  • 김진희
    • 문화기술의 융합
    • /
    • 제6권1호
    • /
    • pp.99-104
    • /
    • 2020
  • 본 논문은 기업의 인사관리와 사업전략 간의 결합패턴에 따른 성과에 대해 분석하였다. 사업전략은 Miles & Snow의 혁신자, 방어자, 분석자 전략으로 구분하였으며, 각 전략 하에서 인사관리가 성과에 미치는 효과를 분석하였다. 자료는 한국노동연구원(KLI)이 2015년까지 진행한 사업체패널조사에 모두 응답한 업체들 중 사업전략에 대해 응답한 465개 기업의 자료를 사용하였다. 분석은 구조방정식모형을 활용하였다. 먼저 전체 표본을 대상으로 몰입형 인사관리와 성과에 대한 관계를 분석하였으며, 다음으로 사업전략 유형에 따라 나눈 개별 자료에서 인사관리가 성과에 미치는 모형을 분석하여 각 모형에서의 변수 간 관계와 모형적합도를 비교하였다. 먼저 전체 표본을 대상으로 한 분석결과에서 몰입형 인사관리가 성과에 유의한 영향을 미쳤고, 모형적합도도 양호하였다. 다음으로 개별 전략 하에서의 모형을 분석하였는데, 몰입형 인사관리는 혁신자 전략에서 성과에 유의한 영향을 미쳤으며, 모형적합도도 양호하였다. 그러나 방어자 및 분석자 전략과 몰입형 인사관리 간의 결합은 성과에 유의하지 않았고 모형적합도도 낮게 나타났다.

국내 병원의 전략에 관한 인식과 구성요소 및 질 수준 평가 (Evaluation on Perception, Elements and Quality of Business Strategy in Domestic Hospitals)

  • 김영훈;김효정;김한성;우정식
    • 한국경영과학회지
    • /
    • 제37권4호
    • /
    • pp.181-196
    • /
    • 2012
  • The purpose of this study is to evaluate of the perception, elements and quality level of business strategy in domestic hospitals. We analyze survey data about strategy. Significantly, we find that domestic hospitals were greatly feeling about the necessity and importance of strategy, but elements and quality level of actual execution strategy is much lower. When evaluating level on the perception, elements and quality of strategy within each of Miles and Snow's strategy type, PA(prospector+analyzer) was higher than DR(defender+reactor). And result of structural equation modeling(SEM), elements had a significant influence on the quality of the strategy, a positive relationship between the components and the PA have been identified. Therefore, we propose that to increase the elements level in order to improve the quality level of strategy, and hospital administrators are need to be PA rather than DR.

단동하우스에서의 보강지주 설치 효과 (Effect of a Supplementary Pole on the Structural Stability in the Single-span Plastic Greenhouses)

  • 염성현;김승희;이상봉;김민영;김철수
    • 생물환경조절학회지
    • /
    • 제19권2호
    • /
    • pp.63-69
    • /
    • 2010
  • 2007년 4월 이전까지 10~15년 동안 규격시설로 운영되어 오던 농가지도형 단동하우스에서의 보강지주 설치효과를 분석하였다. 이전의 연구로 적설하중에 대한 수식 계산을 통해 보강지주 설치 단동하우스의 추가적설심이 제시된 바 있으나 모델이 농가지도형 단동하우스 규격과 상이해 연구 결과를 농가지도형 단동하우스에 그대로 적용하기에 무리가 따랐다. 본 연구에서는 농가지도형 단동하우스를 3차원 강뼈대 구조물로 모델링 하여 보강지주 설치 효과를 분석하였으며 재하시험을 통해 해석결과를 검증하였다. 구조해석 결과, 단동하우스에 보강지주 설치 시 안전적설심은 오히려 줄어드는 것으로 나타났는데 파이프 체결 부에서의 집중 하중으로 지붕도리에 큰 응력이 걸리기 때문으로 보강지주 설치 시에는 지붕도리의 규격도 함께 강화되어야 할 것으로 판단되었다. 지붕도리를 강화하고 보강지주를 3~4m 간격으로 설치할 경우, 안전적설심은 기본모델에서 보다 2배 이상 높아지는 것으로 나타났다. 보강지주 규격별 농가지도형 단동하우스 5종의 안전적설심을 제시하였다.

NCAR 지역기후모형의 인도 여름 몬순의 모사 성능 (Performance of NCAR Regional Climate Model in the Simulation of Indian Summer Monsoon)

  • ;오재호
    • 한국농림기상학회지
    • /
    • 제12권3호
    • /
    • pp.183-196
    • /
    • 2010
  • 아시아 주요 곡물 생산지의 경제 성장과 지표 이용 변화에 따른 인간 활동의 증가는 아시아 몬순의 경향을 변화 시켰다. 본 연구에서는 지표-해양 대비, 하층제트 기류(LLJ), 티벳 고층 및 상층 편동풍 제트 기류를 포함한 인도 여름 몬순의 중요한 구성 요소를 모사하여 지역기후 모형 (RegCM3)의 성능을 평가하였다. 3년(1994: 다우 해, 2002: 평균 해, 2002: 가뭄 해)의 비교 자료를 선택하여 RegCM3은 매년 4월 1일부터 10월 1일까지 60 km의 해상도로 적분하였다. 순환과 강수 모사 결과는 NCEP/NCAR 재해석 자료와 Global Precipitation Climatology Centre(GPCC)의 관측 자료로 검증하였다. RegCM3 모형 모사의 중요 결과는 다음과 같다. (a) LLJ 는 다소 강하였으며 아라비아해에서 다우 해에 두 개로 분할되었으나, 평균 및 가뭄 해에서는 분할되지 않았다. (b) 단일의 대형 고기압이 다우 해에 존재하였으나, 가뭄 해에는 약하고 두 개의 고기압대로 분할되었다. (c) 강수의 공간분포 모사는 대부분 인도 지역에서 GPCC의 관측 강수량과 유사하였다. (d) NIMBUS-7 SMMR 적설 자료를 이용한 민감도 실험에서 북동 및 남부 인도 반도 지역에서 주로 강수량의 감소가 나타났으며, 티벳 지역에서는 4월 적설량이 0.1m 감소하는 것으로 나타났다.

입자추적기반의 불꽃 모델링 기법 (Fireworks Modeling Technique based on Particle Tracking)

  • 조창우;김기현;정창성
    • 전자공학회논문지
    • /
    • 제51권6호
    • /
    • pp.102-109
    • /
    • 2014
  • 입자 시스템은 물리적 현상을 모델링하기 위해 자주 사용된다. 특히, 3차원 공간에서의 풍경, 구름, 파도, 안개, 비, 눈, 불꽃 등의 모델링에 적합하다. 시뮬레이션 모델링에는 다양한 전통적인 방법이 존재하지만 본 논문에서는 입자 시스템을 사용하여 불꽃 입자 추적을 기반으로 한 새로운 불꽃 모델링 기법을 제시하였다. 이 방법은 불꽃 추적을 통해 발사 및 분산한 입자들을 인식하고, 스테레오 기법을 이용함으로써 3D 깊이 값을 구하여 비교적 정확한 3차원적 위치를 추출 할 수 있다. 그러므로 불꽃 입자의 위치, 속도, 색상 및 수명 등의 파라메타를 불꽃 추적을 통해 산출하였고 이를 이용하여 3D 시뮬레이션을 재연할 수 있다. 본 연구는 빠른 입자 추출 및 노이즈에 의한 허위 입자 추출을 방지하기 위해 관심 영역을 사용하였고, 발사 단계에서 견고성을 향상시키기 위해 칼만 필터를 사용하였다. 또한, 입자의 이동 방향을 예측하여 효율적인 추적을 위해 입자의 최대 이동 범위를 고려한 새로운 불꽃 입자 추적 방법을 제안 하였다. 그리고 3D 공간에서 입자의 속도는 불꽃의 회전 각도를 찾음으로써 얻어 질 수 있다. 본 논문에서는 불꽃축제에서 자주 사용되는 구, 원, 국화, 하트 이 네 가지 불꽃 유형에 대하여 각각 모델링에 필요한 파라메타를 불꽃 추적을 통해 구하였고 추적에 대한 속도와 정확도를 측정하였다.

워셔액 가열시스템의 제어시스템 설계에 관한 연구 (Study on control system design for washer fluid heating system)

  • 이제성;김정현;원종섭;이선봉
    • 한국산학기술학회논문지
    • /
    • 제13권6호
    • /
    • pp.2441-2451
    • /
    • 2012
  • 본 논문은 자동차 윈드실드에 생기는 성에, 얼음, 눈 또는 잔해를 제거하는 워셔액 가열시스템의 성능 개선을 위한 새로운 제어 시스템을 제안한다. 먼저, 워셔액 가열시스템의 모델링 과정을 설명하고 실험결과를 이용하여 모델의 특성파라미터를 추출하고 워셔액 가열시스템 성능에 영향을 미치는 설계변수를 선정한다. 두 번째로 워셔액 가열시스템 가열 성능을 향상시키기 위하여 제어 시스템을 제안하였고 실험을 통하여 검증하였다. 제안된 제어시스템의 특징은 가열 성능을 충족하기 위하여 정의된 목표 값까지 WFHS에 인가되는 부스터 컨버터의 입력 전류를 조절하는 것이다. 목표 전류는 초기온도 조건과 함께 유도된 수학적 모델식을 이용하여 계산하였다. 컴퓨터 시뮬레이션과 실제 실험결과는 제안된 제어시스템이 WFHS의 기 설정한 목표성능을 만족시키면서 가열 동작을 수행 할 수 있다는 것을 보여준다.

Micro SMES를 이용한 전원공급 안정화장치 시뮬레이션을 위한 PSCAD/EMTDC 컴포넌트 모델링 (Component Modeling of Micro SMES Based Design of Stabilizer Simulation for Power Supply using PSCAD/EMTDC)

  • 김봉태;박민원;성기철;유인근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.228-230
    • /
    • 2002
  • Recently, electric power reliability of our country has been improved. However, there are still remaining problems which are short-duration variations like instantaneous and momentary interruption and voltage sag by nature calamity ; typhoon, lightning, snow, etc. Besides, power quality ; harmonics, caused by using power electronics equipments, become a hot issue Malfunction of controller and stop machinery, and losing the important data are caused by poor power quality at a couple of second. Due to those, UPS, which is made up battery, has being used, but there are several disadvantages ; long charge and discharge time, environmental problem by acid and heavy metal, and short life time. As generally know, micro-SMES is a method to settle those mentioned. However, there need huge system apparatuses in order to verify the effect of system efficiency and stability considering the size of micro-SMES, the sort of converter type, and various conditions ; inner temperature, magnetic field, quench characteristic of micro-SMES, and etc. In this paper, in order to bring the mentioned above to a settlement, a micro-SMES is modeled with characteristics of micro-SMES is interfaced to EMTOC program using Fortran program interface method. We obtained hopeful answers and made the simulation model of micro SMES.

  • PDF