• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 사면안정 학술발표회 논문집
• /
• pp.161-182
• /
• 1998

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.966-973
• /
• 2008

In recent, the collapses of cut-slope is gradually increased due to the heavy rains accompanied by typhoon. Specially, many cut-slope failures and landslides was happened to Goheung, Yeosu, Suncheon region, Jeonranamdo in the middle of September 2007. The slope of investigation is width 20 m, height 22 m, and the circular failure was occurred. The parent rocks of the slope are pyroclastic rock, namely andesite, andesitic tuff et al. and the weathering grade is completely weathered to residual soils owing to rapid weathering process and has the existence of fault zone and mafic dyke. Also, lots of extension cracks are presented and the hydrologic condition is very deteriorated. As a result of the limit equilibrium analysis, the safety factor is 1.09(in dry season) and 0.64(in wet season). For the stabilization of the cut-slope, we decided to use the retaining wall, anchors and drainage apparatus.

• 한국지반공학회지:지반
• /
• 제11권4호
• /
• pp.111-124
• /
• 1995

산지나 구릉지의 개발시 생성되는 절개사면의 안정문제는 반드시 확보되어야 할 중요한 사항이다. 산사태방지대책으로 억지말뚝공을 채택하는 경우, 억지말뚝공의 사면안정효과는 말뚝 및 사면 모두의 안정이 동시에 만족되어야 한다. 이러한 억지말뚝의 사면안정효과를 확신하기 위하여 억지말뚝이 설치된 사면의 거동을 면밀히 조사.분석하여 볼 필요가 있다. 본 논문에서는 우선 우리나라에서 적용되어 오고 있는 산사태방지대책을 체계적으로 정리하였다. 그리고 한 아파트 신축부지 절개사면을 억지말뚝공으로 복구한 현장사면을 대상으로 사면과 말뚝에 각종 계측기를 설치하고 계측치를 이용하여 억지말뚝과 사면지반의 거동을 조사.분석하여 보았다. 현장계측결과 일정간격의 줄 말뚝으로 설치된 억지말뚝의 사면안정효과는 상당히 양호한 것으로 판단되었다. 억지말뚝 및 지반의 변위는 억지말뚝 전면의 사면정지 작업시 영향을 많이 받았다. 여기서 사면안정공의 시공과정은 크게 4단계로 구분된다. 즉 초기의 사면정지 작업단계와 사면하부 옹벽설치위치 및 전면의 지하주차장용 지하굴착단계 그리고 옹벽완성단계이다. 결국, 본 연구를 통하여 제안된 억지 말뚝설계법의 합리성은 충분히 확일될 수 있었다.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.63-69
• /
• 1998

The slope revegetation methods in Korea are generally the hydroseeding mixed with perennial herbs, soil, fibers, and fertilizer in consideration of scenic landscape rather than ecological and engineering effect. But perennial herbs can't protect the slope from deep surface erosion and they are not tall enough to create the original naturalness at the boundary parts of existing woodlands. This study is about the slope revegetation method using nutritional propagation capacity of plants and the experimental construction was carried out on the cut-slope of Yongin Hoam C.C. We dug several trenches to a depth of 80cm and at intervals of 150cm from each other. After placing various kinds of live branches(Salix species) into the trench, we backfilled with the excavated soils and finally sprayed water mixed with soil-stabilizer, fertilizer. As six months passed, we made a vegetation research and check the slope surface erosion. Vegetation research was performed in examining the frequency of each block using transect method. 31 kinds of plant species appeared in total area($113.6m^2$) and the dominant species are Setaria viridis, Artemisia rubripes, Persicaria pubescens, Plantago asiatica, Cyperus amuricus, Commelina communis. Among the examined blocks, '아', the top part of the slope, showed the ratio of 1.4 as the highest Alpha-diversity. With regard to life form, therophytes were shown dominant distribution of 58% of total species and neophytes relatively low distribution of 16%. It can be estimated that there is no ecological stabilization of this slope, because of ruderal species' occupation of 74% in total area. Regarding the slope stabilization, the serious surface erosion didn't take place in spite of heavy rainfall this year, but a little surface erosion took place at the block where no other species coming from outside of the site were found.

• 한국의류산업학회지
• /
• 제7권2호
• /
• pp.225-230
• /
• 2005

This research was undertaken to compare basic bodice prototypes for Internet shopping customer, and to select a profitable fit vacant space quantity between clothing and body. A total one hundred of eighteen outfits (4 types of pattern ${\times}$ 9 subjects ${\times}$5 body areas) were constructed with basic bodice drafting method of Japan Bunka Women's University according to nine male body types. Fifty-two experts analysis of the different prototypes as five body area and evaluate the most appropriate ease amount and stabilization of the simulation images on the computer. The experiments with automated methods using simulation image are based on AZ program of TORAY, Japan. Data was analyzed using percentiles, frequency and $X^2$. Taken together, the present result of vacant space quantity and stability evaluation through images shows that there is a significant difference in the size variation of the chest circumference, shoulder slope and waist circumference. In case of ease amount, chest area, shoulder slope, waist area and armhole except neckline area were shown more appropriate on the basic bodice pattern without size change. In case of stabilization, the chest area, shoulder slope and armhole except waist area and neckline area was shown the best on the basic bodice pattern without size change. However the waist area was shown on the basic bodice pattern plus 2 cm, neckline was shown more appropriate on the basic bodice pattern plus 1cm.

• 지질공학
• /
• 제13권2호
• /
• pp.157-170
• /
• 2003

본 연구는 국도 건설을 위한 절개면 공사중 붕괴된 사면의 붕괴 원인을 분석하고 안정성 해석을 실시한 후 적절한 대책안을 제시하기 위해 수행되었다. 붕괴 절개면은 매산-가곡간의 국도 도로공사 구간의 일부로서 풍화암과 연암으로 구성되어 있으며 국내 시방서에 따라 시공이 완료된 상태에서 붕괴가 발생하였다. 풍화암과 연암의 지반상태에서 1:1.5의 경사를 가지는 절개면의 붕괴는 국내에서 흔히 발생하는 사례는 아니다. 본 연구에서는 절개면의 붕괴 원인을 분석하기 위하여 현장조사, 시추조사, 계측, 사면안정해석 등을 수행하였으며 이들 자료를 이용하여 조사대상 절개면의 장기적인 안정성 확보를 위한 대책 방안을 제안하였다. 또한, 사면내에 연약층 등이 협재 되어 있고 습곡이나 단층 등이 발달되어 있는 경우에는 불연속면의 방향이 절취면의 방향과 $^30{\circ}$이상 사교하고 있더라도 사면 붕괴가 발생할 가능성이 있으므로 절개면의 설계에는 이들 지질구조에 대한 고려가 반드시 포함되어야 한다.

• 한국환경복원기술학회지
• /
• 제9권6호
• /
• pp.38-51
• /
• 2006

This study was carried out to improve rehabilitation effect by hydro-seeding methods on denuded slopes. Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudinella hirta, Poa pratensis, and Lolium perenne were used in this study. The results of the germination and growth characteristics by seed coating, slope control and soil mulching treatments are summarized here. Seed coating of those plants had an effect on germination ratio, germination force, $LD_{50}$, and seedling growth of stem, leaf and root. The seed coating effect was highest for I. pseudotinctoria while the seedling growth was best for L. cyrtobotrya. Vermiculite+Talcum was the best coating material for germination and seedling growth of the plants. As the slopes were steeper, germination ratio was lower and seedling growth of stem and root decreased. Lots of seeds and soils were swept away when the slope was steep. Soil mulching was effective for germination, seedling growth of stem and root, and soil stabilization. It was more effective when the slope was steeper. Coir net was the most effective soil mulching material n this study.

• 한국농공학회지
• /
• 제9권2호
• /
• pp.1306-1310
• /
• 1967

• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.106-113
• /
• 2009

In this study, stability of the new gabion system with vegetation base materials was analysed. New gabion system with vegetation base materials is a new approach which has been developed to achieve lope stabilization and revegetation of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials. Results from stability analysis are as follows. For the soil density, the angle of internal friction and unit weight of the rock fill was assumed to be $1.90g/cm^3$, $30^{\circ}$ and $2.30t/m^3$, respectively, the slope stability analysis showed that the new gabion system couldn't require any poles to fix it up, and could keep stable during both rainy and dry seasons. As the results of checks against overturning and sliding, the retaining wall with. the new gabion system could produce suitable factors of safety for overturning and sliding. Vegetation established on the surface of the new gabion systems indirectly can help to increase slope stability by prevention of surface erosion. Consequently, the new gabion system with vegetation base materials could achieve the desired effect on slope stabilization as much as existing gab ion system could do, and could promote rapid establishment of vegetation on cut-slopes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 터널.암반역학위원회 박사학위 논문집
• /
• pp.3-34
• /
• 1998

The stability condition of rock slopes is greatly affected by the geometry and strength parameters of discontinuities in the rock masses. Rock slopes Involving movement of rock blocks on discontinuities are failed by one or combination of the three basic failure modes-plane, wedge, and toppling. In rock mechanics, practically all the parameters such as the joint set characteristics, the rock strength properties, and the loading conditions are always subject to a degree of uncertainty. Therefore, a reasonable assessment of the rock slope stability has to include the excavation of the multi-failure modes, the consideration of uncertainties of discontinuity characteristics, and the decision on stabilization measures with favorable cost conditions. This study was performed to provide a new numerical model of the deterministic analysis, reliability analysis, and reliability-based optimization for rock slope stability. The sensitivity analysis was carried out to verify proposed method and developed program; the parameters needed for sensitivity analysis are design variables, the variability of discontinuity properties (orientation and strength of discontinuities), the loading conditions, and rock slope geometry properties. The design variables to be optimized by the reliability-based optimization include the cutting angle, the support pressure, and the slope direction. The variability in orientations and friction angle of discontinuities, which can not be considered in the deterministic analysis, has a greatly influenced on the rock slope stability. The stability of rock slopes considering three basic failure modes is more influenced by the selection of slope direction than any other design variables. When either plane or wedge failure is dominant, the support system is more useful than the excavation as a stabilization method. However, the excavation method is more suitable when toppling failure is dominant. The case study shows that the developed reliability-based optimization model can reasonably assess the stability of rock slopes and reduce the construction cost.