Slope Stability Analysis and Suggestion of Stabilization Methods on Failed Cut-Slopes Interbedded with Weakness Layer

연약층이 협재된 절개면의 안정성 해석 및 대책

  • 구호본 (한국건설기술연구원 지반연구부) ;
  • 이대영 (한국건설기술연구원 지반연구부) ;
  • 김학준 (대전대학교 공과대학 지구시스템공학과)
  • Published : 2003.06.01

Abstract

This study is performed to investigate the cause of slope failure and to suggest suitable stabilization methods for the failed rock slopes. The slope which is located along the national highway between Maesan and Kakok in Dangjin-gun failed during the construction of roads. Site investigation, drilling program, field measurements, rainfall records, and stability analyses are used to investigate the cause of the slope failure. The problem determining the cut-slope angle based on the existing design manual for the construction of roads is reviewed based on the case history given in this paper. If weakness layer and geological structures such as folds and faults are developed in a slope, slope failure is possible even though the direction of slope and the direction of discontinuities depart more than $30^{\circ}$.

본 연구는 국도 건설을 위한 절개면 공사중 붕괴된 사면의 붕괴 원인을 분석하고 안정성 해석을 실시한 후 적절한 대책안을 제시하기 위해 수행되었다. 붕괴 절개면은 매산-가곡간의 국도 도로공사 구간의 일부로서 풍화암과 연암으로 구성되어 있으며 국내 시방서에 따라 시공이 완료된 상태에서 붕괴가 발생하였다. 풍화암과 연암의 지반상태에서 1:1.5의 경사를 가지는 절개면의 붕괴는 국내에서 흔히 발생하는 사례는 아니다. 본 연구에서는 절개면의 붕괴 원인을 분석하기 위하여 현장조사, 시추조사, 계측, 사면안정해석 등을 수행하였으며 이들 자료를 이용하여 조사대상 절개면의 장기적인 안정성 확보를 위한 대책 방안을 제안하였다. 또한, 사면내에 연약층 등이 협재 되어 있고 습곡이나 단층 등이 발달되어 있는 경우에는 불연속면의 방향이 절취면의 방향과 $^30{\circ}$이상 사교하고 있더라도 사면 붕괴가 발생할 가능성이 있으므로 절개면의 설계에는 이들 지질구조에 대한 고려가 반드시 포함되어야 한다.

Keywords

References

  1. 도로설계편람(Ⅱ) 제4편 토공 및 배수 건설교통부
  2. 사면안정 학술발표회 암반사면의 평면파괴조건 고찰 황영철;유병옥;김성환;이승호
  3. Report from University of California to U.S. B. Mines Functional Classification of Gouge Material from Seams and Faults as Related to Stability Problems in Undergroun Openings Brekke,T.L.;Howard,T.R.
  4. Rock Slope Engineering Hoek,E.;Bray,J.
  5. Fundamentals of Soil Behavior Mitchell,J.K.