• Title/Summary/Keyword: sink capacity

Search Result 106, Processing Time 0.023 seconds

Interference and Sink Capacity of Wireless CDMA Sensor Networks with Layered Architecture

  • Kang, Hyun-Duk;Hong, Heon-Jin;Sung, Seok-Jin;Kim, Ki-Seon
    • ETRI Journal
    • /
    • v.30 no.1
    • /
    • pp.13-20
    • /
    • 2008
  • We evaluate the sink capacity of wireless code division multiple access (CDMA) sensor networks with layered architecture. We introduce a model of interference at a sink considering two kinds of interference: multiple access interference (MAI) and node interference (NI). We also investigate the activity of sensor nodes around the sink in relation to gathering data under a layered architecture. Based on the interference model and the activity of sensor nodes around the sink, we derive the failure probability of the transmission from a source node located one hop away from the sink using Gaussian approximation. Under the requirement of 1% failure probability of transmission, we determine the sink capacity, which is defined as the maximum number of concurrent sensor nodes located one hop away from the sink. We demonstrate that as the node activity of the MAI decreases, the variation of the sink capacity due to the node activity of the NI becomes more significant. The analysis results are verified through computer simulations.

  • PDF

Evaluation of Varietal Difference and Environmental Variation for Some Characters Related to Source and Sink in the Rice Plants (벼의 Source 및 Sink형질의 품종간차이와 환경변이의 평가)

  • Choi, Hae-Chun;Kwon, Yong-Woong
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.30 no.4
    • /
    • pp.460-470
    • /
    • 1985
  • Experiments were carried out to evaluate the standard gravity in determining potential kernel size and to determine the effective sampling way by analyzing intra - and inter - plant variations for some source and sink characters using eleven semi-dwarf indica and three japonica cultivars including four semi-dwarf indica nearisogenic lines. Also, additional experiments were conducted to understand yearly variation and variety x year interaction effects for ten characters related to source and sink and to characterize the varietal difference of pre- and post-heading self-competition employing three parental varieties and their F$\sub$5/ progenies in 1982 and 1983. It is desirable to determine the potential kernel size by average kernel wight of rice grains showing above 1.15 specific gravity. There was significant difference in leaf area per tiller, spikelets and sink capacity per panicle among vigorous, intermediate and inferior tillers classified by differentiated order and vigorousness. Although it was difficult to find out any significant difference in grain-fill ratio, ratio of perfectly ripened grain, potential kernel size and sink/source ratio between vigorous and intermediate tillers, there was big difference between them and inferior one. The coefficients of variation within each tiller-group for some characters related to source and sink were larger with the order of vigorous tillers < intermediate one '||'&'||'lt; inferior one, and the average heritability of all characters, evaluated by the ratio of varietal variance (equation omitted) to total variance (equation omitted), were higher with the order of inferior tillers '||'&'||'lt; intemediate one '||'&'||'lt; superior one. Therefore, it is desirable to sample the vigorous tillers to represent the varietal difference of these traits. '82-'83 year variations of three parental cultivars were significant for all traits except for leaf area/tiller, panicles/hill, leaf area index and rough rice yield. The characters showing highly significant variance of variety x year interaction were growth duration from transplanting to heading, leaf area/tiller, sink/source ratio, sink capacity/panicle and grain yield. Generalized yearly response of three parental varieties (Suweon 264, Raegyeong, IR1317-70-l) and their F$\sub$5/ progenies on the 1st and 2nd principal components extracted from ten source and sink characters generally exhibited reduction in both source and sink. However, there were diverse variety x year interactions such as progenies showing similar reaction with their parents and intermediate or recombinational yearly response with little or considerable yearly movement on the four-dimensional planes of the two upper principal components between 1982 and 1983. Sink characters revealing highly significant border effect were grain-fill ratio, spikelets and sink capacity per panicle. Among them the latter two especially showed significant variety x border effect interaction. Self-competition characterized by relative weakness of inside plant's sink characters compared to the border one was more severe during the reproductive stage before heading than maturing stage. Though the larger sink capacity per panicle generally disclosed the severer self-competition, some lines (like Suweon 264) revealed severe self-competition with small sink capacity while a few others showed tender self-competition in spite of big sink capacity per panicle.

  • PDF

Environmental Impact Assessment for Development Projects Considering Carbon Sink and Sequestration(I) - Focused on a Solar Power Plant Development Project - (탄소흡수원을 고려한 개발사업 환경영향평가 방안(I) - 태양광발전소 건설사업 사례를 중심으로 -)

  • Hwang, Sang-Il;Park, Sun-Hwan
    • Journal of Environmental Impact Assessment
    • /
    • v.19 no.6
    • /
    • pp.625-631
    • /
    • 2010
  • The objective of this work was to investigate how carbon sink and sequestration of vegetation and soil in the development project area can impact the land use plan, in addition to carbon emission capacity of the development project when we conduct environmental impact assessment. Especially, we did this work for a development project of solar power plant which would be constructed in forest area. Through this work, we found that 1) the amount of carbon sink and sequestration largely decreased due to reduction of the green area, 2) in terms of carbon sink and sequestration, conservation of natural green area is better than construction of newly vegetated area, 3) biochar application into soil can become an alternative for increase of carbon sink, and 4) even though a solar power production does hugely reduce carbon emissions and offset the carbon sink and sequestration capacity from the forest, it is necessary to consider the public value of the forest(reduction of heat island, habitat etc.) in siting for development area.

Heritability Estimates of Sink and Source Characters by $F_2$ and $F_5$ Correlation in Rice ($F_2$$F_5$ 상관에 의한 벼 Sink 및 Source 관련형질의 유전력 추정)

  • Ha, Woon-Goo;Kim, Ho-Yeong;Choi, Hae-Chune;Lim, Sang-Jong;Suh, Hak-Soo;Lim, Moo-Sang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.47 no.3
    • /
    • pp.151-156
    • /
    • 2002
  • The heritability of sink-source characters was estimated by regression coefficient between F$_2$ and F$_{5}$ in two crosses of IR 66738-118-1-2/Gayabyeo and the Ilpumbyeo/YR 15965 Acp 33. In order to get the some basic information for breeding of high yielding rice, genetic resources of new plant type with low tiller and heavy panicle were used. Most of the sink and source characters in Ilpumbyeo/YR 15965 Acp 33 cross showed high heritability over than 0.224. But the specific leaf area and sink-source ratio displayed low heritability being 0.009 and 0.013, respectively. Heritability of all sink and source characters in IR 66738-118-1-2/Gayabyeo cross ranged from 0.115 to 0.247. Correlation coefficient between yield and yield components in both combination were in the ranged between 0.001 and 0.247. But correlations among the yield components were not significant. Correlations between the yield and sink-source characters in both combinations were also highly significant. Particularly, correlation between the grain tiling ratio and most of the sink-source characters in IR 66738-118-1-2/Gayabyeo cross were not significant. In Ilpumbyeo/YR 15965 Acp 33 cross, correlations between grain filling ratio and source characters were positively significant. but sink characters (sink capacity and sink-source ratio, etc) were negatively significant.

The maximum power condition of the Brayton cycle with heat exchange processes (熱交換 過程 을 考慮한 브레이튼 사이클 의 最大出力條件)

  • 정평석;차진걸;노승탁
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.9 no.6
    • /
    • pp.795-800
    • /
    • 1985
  • The ideal Brayton cycle has been analyzed with the heat exchange processes between the working fluid and the heat source and the sink while their heat capacity rates are constant. The power fo the cycle can be expressed in terms of a temperature of the cycle and the heat capacity rate of the working fluid. There exists an optimum power condition where the heat capacity rate of the working fluid has a value between those of the heat source and the heat sink, and the cycle efficiency is determined by the inlet temperatures of the heat source and the sink.

The Maximum Power Condition of the Endo-reversible Cycles (내적가역 사이클의 최대출력 조건)

  • 정평석;김수연;김중엽;류제욱
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.17 no.1
    • /
    • pp.172-181
    • /
    • 1993
  • Pseudo-Brayton cycle is defined as an ideal Brayton cycle admitting the difference between heat capacities of working fluid during heating and cooling processes. The endo-pseudo-Brayton cycle which is a pseudo-Brayton cycle with heat transfer processes is analyzed with the consideration of maximum power conditions and the results were compared with those of the endo-Carnot cycle and endo-Brayton cycle. As results, the maximum power is an extremum with respect to the cycle temperature and the flow heat capacities of heating and cooling processes. At the maximum power condition, the heat capacity of the cold side is smaller than that of heat sink flow. And the heat capacity of endo-Brayton cycle is always between those of heat source and sink flows and those of the working fluids of pseudo-Brayton cycle. There is another optimization problem to decide the distribution of heat transfer capacity to the hot and cold side heat exchangers. The ratios of the capacies of the endo-Brayton and the endo-pseudo-Braton cycles at the maximum power condition are just unity. With the same heat source and sink flows and with the same total heat transfer caqpacities, the maximum power output of the Carnot cycle is the least as expected, but the differences among them were small if the heat transfer capacity is not so large. The thermal efficiencies of the endo-Brayton and endo-Carnot cycle were proved to be 1-.root.(T$_{7}$/T$_{1}$) but it is not applicable to the pseudo-Brayton case, instead it depends on comparative sizes of heat capacities of the heat source and sink flow.w.

Varietal Difference in Changing Aspect of Daily Sink Filling During the Grain Filling Period in the Rice Plants (수도증열기간중 Sink충전의 경시적 변화와 그 품종간 차이)

  • 최해춘
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.31 no.1
    • /
    • pp.43-48
    • /
    • 1986
  • The experiment was conducted to know the varietal difference in changing aspect of daily filling sink during of rice using three cultivars; ‘Suweon 295’ (japonica), ‘Suwoen 264’ and ‘IR 1317-70-1’ (semi-dwarf indica) cultivated in the field and green house of the Crop Experiment Station in 1983. There was not significant varietal difference in flowering habit and duration of flowering period each panicle. Semi-dwarf indica cultivars showed shorter days to physiological maturity of rice kernel than the japonica one. The former also displayed earlier decrease in water content of rice grain during ripening than the latter. Japonica variety revealed larger difference in ripening advancement between vigorous florets and inferior one than semi-dwarf indica varieties. The semi-dwarf indica rice cultivars expressed significantly shrewder parabola of daily filling of sink per panicle during ripening than the japonica one. The time showing maximum capacity of daily filling of sink per panicle during ripening was 10-12 days after anthesis. The filling capacity of daily sink filling per panicle for 'IR 1317-70-1', 'Suweon 264' and 'Suweon 265' at this time were about 240 mg, 165 mg and 145 mg, respectively. Pattern of sink filling per panicle during ripening was slightly changed by the cultural environment. ‘Suweon 295’ showed slightly sharper parabola and 2-3 days earlier time showing maximum capcity of daily sink demand per panicle during ripening in the field than those in the green house.

  • PDF

Parameters for Evaluating the Sink Capacity of Broad Leaves Trees for the Gas Phase Air Pollutants (가스상 대기오염물질에 대한 활엽수의 정화능력 평가인자)

  • Kim, Jeong-Gyu;Koh, Kang-Suk
    • Korean Journal of Environmental Agriculture
    • /
    • v.15 no.4
    • /
    • pp.472-478
    • /
    • 1996
  • It was conducted to compare the availabilities of parameters for evaluating the sink capacity of the broad leaves trees such as Acer saccharium, Ailanthus altissima, Ginkgo biloba, Platanus occidentalis and Salix pseudolasiogyne. These trees, repoted as resistant species to air pollutants, were exposed to $SO_2$, $NO_2$ and CO within a phytotron at $25^{\circ}C$ with 70% of relative humidity. Since the amount of ad- or absorbed gas does not always agree with the amount of accumlated pollutants in leaves and with the stomatal density, it is assumed that the amount of ad- or absorbed gas is the most basal index to evaluate the sink capacity of trees. The stomatal diffusive resistance, which has a good agreement with the amount of ad- or absorbed gas, is also available for evaluating the sink capacity of broad leaves trees.

  • PDF

Heat Pipe Heat Sink Development for Electronics Cooling (전자냉각용 히트파이프 히트싱크 개발)

  • 이기우;박기호;이석호;유성연
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.14 no.8
    • /
    • pp.664-670
    • /
    • 2002
  • A heat sink (HS) system using heat pipes for electronics systems was studied. The experimental results indicate that a cooling capacity of up to 150w at an overall temperature difference of $50^{\circ}C$ can be attainable. The heat sink design program also showed that a computer simulation can predict the most of the parameters involved. To do so, however, the interior temperature distribution had to be verified by experimental results. The current simulation results were close to the experimental results in acceptable range. The simulation study showed that the design program can be a good tool to predict the effects of various parameters involved in the optimum design of the heat sink.

Source and Sink Relationship in Diallell Grafting among Sweet potato Cultivars (고구마 품종 간 이면접목에 의한 생산능력과 저장능력)

  • 남상영;정승근;김인재;김민자;이철희;김태수
    • Korean Journal of Plant Resources
    • /
    • v.14 no.2
    • /
    • pp.89-93
    • /
    • 2001
  • To obtain the basic information for varietal improvement and cultural practice, source and sink relationship in the diallel grafting was analyzed among five sweet potato cultivars, Yulmi, Shinyulmi, Gunmi, Hongmi and Seonmi, whose source and sink capacities are different one another. General grafting effect(GGE), specific grafting effect(SGE) and reciprocal grafting effect(RGE) of top weight, tuberous root weight and total weight showed considerable differences. Grafting decreased total dry weight but its effect was different among grafting combinations. Growth and dry matter production of top were affected more by scion, while those of underground were influenced more by stock. Shinyulmi which has great potential source and sink capacities resulted the highest total dry weight, while Hongmi and Yulmi which have low potential source capacity resulted the lowest total dry weight.

  • PDF