• Advances in materials Research
• /
• 제12권3호
• /
• pp.243-261
• /
• 2023

This study aims to analyze the mechanical buckling behavior of a single-walled carbon nanotube (SWCNT) integrated with a one-parameter elastic medium and modeled as a Kerr-type foundation under a longitudinal magnetic field. The structure is considered homogeneous and therefore modeled utilizing the nonlocal first shear deformation theory (NL-FSDT). This model targets thin and thick structures and considers the effect of the transverse shear deformation and small-scale effect. The Kerr model describes the elastic matrix, which takes into account the transverse shear strain and normal pressure. Using the nonlocal elastic theory and taking into account the Lorentz magnetic force acquired from Maxwell relations, the stability equation for buckling analysis of a simply supported SWCNT under a longitudinal magnetic field is obtained. Moreover, the mechanical buckling load behavior with respect to the impacts of the magnetic field and the elastic medium parameters considering the nonlocal parameter, the rotary inertia, and transverse shear deformation was examined and discussed. This study showed useful results that can be used for the design of nano-transistors that use the buckling properties of single-wall carbon nanotubes(CNTs) due to the creation of the magnetic field effect.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.117-120
• /
• 2005

The relationship between strain and applied potential was derived for composite actuators consisting single-wall carbon nanotubes (SWNTs) and conductive polymers (CPs). During deriving the relationship, an electrochemical ionic approach is utilized to formulate the electromechanical actuation of the composite film actuator. The results show that the well-aligned SWNTs composite actuator can give good actuation responses and high actuating forces available. The actuation is found to be affected by both SWNTs and CPs components and the actuation of SWNTs component has two kinds of influences on that of the CPs component: reinforcement at the positive voltage and abatement at the negative voltage. CNT/EAP was fabricated successfully using the chemical polymerization method.

• 센서학회지
• /
• 제16권4호
• /
• pp.313-318
• /
• 2007

Single-wall carbon nanotube field-effect transistors (SWCNT FETs) of top gate structure were fabricated in a conventional metal-oxide-semiconductor field effect transistor (MOSFET) with gate electrodes above the conduction channel separated from the channel by a thin $SiO_{2}$ layer. The carbon nanotubes (CNTs) directly grown using thin Fe film as catalyst by thermal chemical vapor deposition (CVD). These top gate devices exhibit good electrical characteristics, including steep subthreshold slope and high conductance at low gate voltages. Our experiments show that CNTFETs may be competitive with Si MOSFET for future nanoelectronic applications.

• 청정기술
• /
• 제17권3호
• /
• pp.273-279
• /
• 2011

제조나노물질은 원료물질이 동일하더라도 제조방법에 따라 최종생산물의 물리화학적 특성은 매우 상이해질 수 있고 더불어 독성 또한 크게 달라질 수 있을 것으로 추정되고 있다. 본 연구에서 우리는 2종의 탄소나노튜브(단층벽 탄소나노튜브 및 다층벽 탄소나노튜브)를 마우스에 경구와 경기관지로 처리한 후 체중당 상대무게 및 염증반응 지표를 조사함으로써 길이와 전기전도성에 따른 독성을 동정하였다. 실험 결과, 다층벽 탄소나노튜브의 경우 체중 감소는 길이가 짧은 그룹에서 더 강하게 관찰된 반면, 염증 반응은 비교적 길이가 긴 그룹에서 더 강하게 유도되었다. 경기관지로 처리된 단층벽 탄소나노튜브는 뇌와 신장의 상대무게를 의미있게 감소시켰고, 기관지 세척액과 혈액 내 면역세포의 의미있는 변화는 처리 후 1일과 7일에서 주로 관찰되었다. 이 결과를 통해 길이, 입경, 층벽의 수와 같은 탄소나노튜브의 물리화학적 특성이 물질에 의한 독성과 염증 반응에 매우 중요한 인자로 작용하고 있음을 확인할 수 있었다.

• Composites Research
• /
• 제18권5호
• /
• pp.34-39
• /
• 2005

단일벽 탄소나노튜브와 전기전도성 폴리머로 구성된 복합재 엑츄에이터의 변형율-전압간의 관계식이 유도되었으며, 얇은 복합재 필름 형태의 엑츄에이터의 전기기계적인 작동을 수식화하기 위해서 전기화학적 이온 접근법을 사용하였다. 이 방법은 엑츄에이터의 작동에 대한 이해를 쉽게 할 수 있다. 실험결과와 계산결과는 잘 일치한다. 이상적으로 잘 배열된 단일벽 탄소나노튜브 엑츄에이터는 좋은 반응특성과 작동력을 나타내었다. 작동변위는 나노튜브와 기지인 폴리머의 영향을 받으며, 단일벽 탄소나노튜브는 양의 전압에서는 기지를 보강하며 음의 전압에서는 기지를 수축하게 하는 영향을 미친다. 나노튜브의 배열을 곧게하고, 적절한 전해질과 전압을 선택하면 엑츄에이터의 성능을 최적화시킬 수 있다.

• Composites Research
• /
• 제37권1호
• /
• pp.32-39
• /
• 2024

고체수소저장은 수소 기반 경제 발전과 에너지 저장 기술 혁신의 핵심 주제로 부각되고 있다. 이러한 저장 방식은 압축 및 액화수소 저장 등 기존 방식에 비해 안전성과 저장 및 운용 효율성 측면에서 우수한 특성을 보여주고 있다. 본 연구에서는 다양한 구조적 설계 요소 별로 나노튜브 표면에서의 고체수소저장 성능을 평가하고자 한다. 본 연구는 나노튜브의 저장 메커니즘을 밝히고자 분자 역학 시뮬레이션(MD)을 도입하여 수행되었다. 본 연구의 시뮬레이션에는 다양한 직경, 다중벽 구조(MWNT), 단일벽 구조(SWNT)의 탄소나노튜브(CNT) 및 붕소-질소 나노튜브(BNNT)가 도입되어 진행되었다. 방사형 밀도 함수(RDF)를 통해 다양한 조건에서 수소의 저장 및 효과적인 방출을 분석한 결과, 반경 감소와 이중벽 구조가 고체 수소 저장을 높이는 데 기여하는 것으로 나타났다. 또한, 붕소-질소 나노튜브의 수소 저장 용량은 탄소 나노튜브에 비해 낮게 측정되었지만, 유효 수소 저장 측면에서는 탄소 나노튜브를 훨씬 능가하는 것으로 나타났다.

• Advances in aircraft and spacecraft science
• /
• 제5권1호
• /
• pp.21-49
• /
• 2018

In this paper, geometric nonlinear bending characteristics of single wall carbon nanotube reinforced composite (SWCNTRC) doubly curved shell panels subjected to uniform transversely loadings are investigated. The nonlinear mathematical model is developed for doubly curved SWCNTRC shell panel on the basis of higher-order shear deformation theory and Green- Lagrange nonlinearity. All nonlinear higher order terms are included in the mathematical model. The effective material properties of SWCNTRC are estimated by using Eshelby-Mori-Tanaka micromechanical approach. The governing equation of the shell panel is obtained using the total potential energy principle and a Newton-Raphson iterative method is employed to compute the nonlinear displacement and stresses. The present results are compared with published literature. The effect of SWCNT volume fraction, width-to-thickness ratio, radius-to-width ratio (R/a), boundary condition, linear and nonlinear deflection, stresses and different types of shell geometry on nonlinear bending response is investigated.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.537-548
• /
• 2017

In this paper presents bending characteristic of single wall carbon nanotube reinforced functionally graded composite (SWCNTRC-FG) plates. The finite element implementation of bending analysis of laminated composite plate via well-established higher order shear deformation theory (HSDT). A seven degree of freedom and $C^0$ continuity finite element model using eight noded isoperimetric elements is developed for precise computation of deflection and stresses of SWCNTRC plate subjected to sinusoidal transverse load. The finite element implementation is carried out through a finite element code developed in MATLAB. The results obtained by present approach are compared with the results available in the literatures. The effective material properties of the laminated SWCNTRC plate are used by Mori-Tanaka method. Numerical results have been obtained with different parameters, width-to-thickness ratio (a/h), stress distribution profile along thickness direction, different SWCNTRC-FG plate, boundary condition, through the thickness (z/h) ratio, volume fraction of SWCNT.

• Steel and Composite Structures
• /
• 제26권1호
• /
• pp.1-15
• /
• 2018

This study reported, the effect of random variation in system properties on bending response of single wall carbon nanotube reinforced composite (SWCNTRC) plates subjected to transverse uniform loading is examined. System parameters such as the SWCNT armchair, material properties, plate thickness and volume fraction of SWCNT are modelled as basic random variables. The basic formulation is based on higher order shear deformation theory to model the system behaviour of the SWCNTRC composite plate. A C0 finite element method in conjunction with the first order perturbation technique procedure developed earlier by the authors for the plate subjected to lateral loading is employed to obtain the mean and variance of the transverse deflection of the plate. The performance of the stochastic SWCNTRC composite model is demonstrated through a comparison of mean transverse central deflection with those results available in the literature and standard deviation of the deflection with an independent First Order perturbation Technique (FOPT), Second Order perturbation Technique (SOPT) and Monte Carlo simulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.76-79
• /
• 2003

The characteristic of single wall carbon nanotube (SW-CNT) and herringbone nano fiber (HB-CNF) emitters was described. SW-CNT synthesized by arc discharge and HB-CNF prepared by thermal CVD were mixed with binders and conductive materials, and then were formed by screen-printing process. In order to obtain efficient field emissions, the surface treatment of rubbing & peel-off was applied to the printed CNT and CNF emitters. The basic structure of FED was of a diode type through fully vacuum packaging. Also, we proposed a new triode type of field emitter using a mesh gate plate having tapered holes and could achieve the ideal triode properties with no gate leakage currents.