• Korean Journal of Mathematics
• /
• 제28권3호
• /
• pp.421-438
• /
• 2020

In this paper we enumerate all commutative single power cyclic hypergroups of order 4 and period 2. Moreover, we prove some interesting properties regarding cyclic hypergroups.

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.775-780
• /
• 2006

Mechanical and electrical performance of anode-supported SOFC single cells were analyzed after thermal cyclic operation. The experiments of thermal cyclic cell-operation were carried out four times and performance of each cell was measured at different temperatures of 650, 700, and $750^{\circ}C$, respectively. As increasing the number of thermal cycle test, single cells showed poor I-V characteristics and lower 4-point bending strength. The anode polarization was also measured by AC-impedance analysis. The observation of the microstructure of the anodes in single cells proved that the average particle size of Ni decreased and the porosity of anode increased. It is thought that the thermal cycle caused the degradation of performance of single cells by reducing the density of three-phase boundary region.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1638-1653
• /
• 2014

A sequential optimization algorithm (SOA) for resource allocation in a cyclic-prefixed single-carrier cognitive relay system is proposed in this study. Both subcarrier pairing (SP) and power allocation are performed subject to a primary user interference constraint to minimize the mean squared error of frequency-domain equalization at the secondary destination receiver. Under uniform power allocation at the secondary source and optimal power allocation at the secondary relay, the ordered SP is proven to be asymptotically optimal in maximizing the matched filter bound on the signal-to-interference-plus-noise ratio. SOA implements the ordered SP before power allocation optimization by decoupling the ordered SP from the power allocation. Simulation results show that SOA can optimize resource allocation efficiently by significantly reducing complexity.

• 복합신소재구조학회 논문집
• /
• 제4권1호
• /
• pp.33-39
• /
• 2013

Structural insulated panels, structurally performed panels consisting of a plastic insulation bonded between two structural panel facings, are one of emerging products with a viewpoint of its energy and construction efficiencies. These components are applicable to fabricated wood structures. In Korea, there are few technical documents regulated structural performance and engineering criteria in domestic market. This study was conducted to identify fundamental performance of both monotonic load and quasi static cyclic load for SIPs in shear wall application. Static test results showed that maximum load was 44.3kN, allowable shear load was 6.1kN/m, shear stiffness was 1.23 M N/m, and ductility ratio was 3.6. Cyclic test was conducted by two kinds of specimens : single panel and double panels. Cyclic test results, which were equivalent to static test results, showed that maximum load was 45.42kN, allowable shear load was 6.3kN/m. Furthermore the accumulated energy dissipation capability for double panels was as 2.3 times as that for single panel. From performance of structural tests, it was recommended that the allowable shear load for panels was at least 6.1kN/m.

• Steel and Composite Structures
• /
• 제14권6호
• /
• pp.587-604
• /
• 2013

There are few technical documents regulated structural performance and engineering criteria in domestic market for Structural insulated panels in Korea. This paper was focused to identify fundamental performance under monotonic loading and cyclic loading for SIPs in shear wall application. Load-displacement responses of total twelve test specimens were recorded based on shear stiffness, strength, ultimate load and displacement. Finally energy dissipation of each specimen was analyzed respectively. Monotonic test results showed that ultimate load was 44.3 kN, allowable shear load was 6.1 kN/m, shear stiffness was 1.2 MN/m, and ductility ratio was 3.6. Cyclic test was conducted by two kinds of specimens: single panel and double panels. Cyclic loading results, which were equivalent to monotonic loading results, showed that ultimate load was 45.4 kN, allowable shear load was 6.3 kN/m. Furthermore the accumulated energy dissipation capability for double panels was as 2.3 times as that for single panel. Based on results of structural performance test, it was recommended that the allowable shear load for panels should be 6.1 kN/m at least.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제26권4호
• /
• pp.233-245
• /
• 2019

Cyclic hypergroups are of great importance due to their applications to many field in mathematics. In this paper, we classify all polygroups of order less than six where each of its non-identity elements is a generator.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.325-336
• /
• 2013

대표적인 D2D (Device-to-Device) 통신 시스템 중 하나인 Qualcomm사의 FlashLinQ 시스템에서는 링크 스케줄링 과정을 낮은 복잡도로 실현할 수 있도록 하기 위해 단일-톤 (single-tone) 신호를 이용한 우선순위 및 SIR (Signal-to-Interference power Ratio) 기반의 링크 스케줄링 기법을 수행한다. 하지만 다중 경로 채널 환경에서는 주파수 선택적 페이딩의 영향으로 단일-톤 위치에서와 실제 데이터가 전송되는 전체 대역에서의 수신 전력 간 오차가 발생할 수 있으며, 이는 공평성 측면에서 문제가 될 뿐만 아니라 셀 전체 전송률 상의 손실을 일으킬 수 있다. 따라서, 본 논문에서는 이러한 문제를 해결하기 위해 CAZAC (Constant Amplitude Zero Auto-Correlation) 시퀀스의 상관 특성을 이용해 전체 대역에 대한 SIR 에 가까운 값을 획득할 수 있는 링크 스케줄링 기법을 제안한다. 제안 기법은 전체 대역을 다수의 sub-block 으로 구분하고 각 sub-block 마다 링크의 우선순위에 해당하는 순환 오프셋 (cyclic offset) 을 적용한 CAZAC 시퀀스를 전 대역에 걸쳐 전송하여, 수신 신호와 참조 신호간의 순환 상호 상관 연산 (cyclic cross-correlation)을 통해 전체 대역에 대한 SIR 에 근접한 값을 획득할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.629-634
• /
• 2000

Comparing with single structure constructed with reinforced concrete or steel, composite structures have a great advantage. However, in case of nuclear power structure, the application of a conventional single structure (reinforced concrete or steel structure) inflicts a heavy loss on a economical and constructive efficiency. But, the application of composite slab to nuclear power structure could compensate these deficiency. Therefore, in this study, the structural behavior of composite slab in nuclear power structure is observed to assure economical and constructive efficiency.

• 전자공학회논문지C
• /
• 제36C권9호
• /
• pp.13-19
• /
• 1999

본 논문에서는 1mW의 낮은 전력소모를 갖는 8-bit 100KSPS CMOS A/D 변환기를 설계, 제작하였다. Cyclic 구조를 갖는 A/D 변환기에서 발생하는 연산증폭기의 시스템적인 offset 전압을 효과적으로 감소시키기 위해, 새로운 시스템적인 offset 전압 제거 기술을 제안하였다. 또한 기존 Gain 증폭기에서 발생하는 오차를 감소시키기 위해 완전 차동 구조의 Gain 증폭기를 설계하였다. 제안된 A/D 변환기는 $0.6{\mu}m$ single-poly triple-metal n-well CMOS 공정을 사용하여 제작되었으며, +3V 단일 공급전압에서 DNL과 INL은 ${\pm}1LSB$ 이내로 측정되었고, 100KHz의 샘플링 주파수에서 43dB의 SNR를 갖는다. 측정된 최대전력소모는 $980{\mu}W$로 나타났다.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.6-16
• /
• 2010

Since OFDM system suffers from high peak-to average power ratio(PAPR) drawbacks, more energy has been converted to seek for a new substitutable system which can maintain OFDM system's inherent virtues while avoid its defects. Consequently, a new multicarrier system called as CI/OFDM system has been proposed which applied carrier interferometry(CI) code to OFDM system. Due to its low PAPR advantage and orthogonal property, it has received more and more attention. Simultaneously, an old technique called single carrier(SC) system has retaken its attractions for the same purposes. This paper analyzes two cyclic prefixed transmission schemes variants of OFDM system: 1.carrier interferometry-Orthogonal Frequency-Division Multiplexing (CI/OFDM); 2. Cyclic prefixed single carrie(CP-SC) with frequency domain equalization. We compare the achievable bit rate transmission of the two systems in terms of signal to noise ratio(SNR) by mathematical derivation. We demonstrated that CI/OFDM achieves a bit higher transmission bit rate to that of the CP-SC with frequency domain equalizer.