• 제목/요약/키워드: single target

검색결과 1,417건 처리시간 0.028초

뇌졸중 환자를 대상으로 한 단일대상연구의 특성과 질적 수준에 관한 연구: 보건의료 분야를 대상으로 (Study on the Characteristics and Quality Level of Single Subject Researches in the Stroke Patients : The Field of health care ~)

  • 심경보
    • 대한지역사회작업치료학회지
    • /
    • 제8권2호
    • /
    • pp.15-28
    • /
    • 2018
  • 목적 : 본 연구는 뇌졸중 환자를 대상으로 한 단일대상연구의 특성을 파악하고 질적 수준을 알아보고자 하였다. 연구방법 : 국가과학기술정보센터(NDSL), 누리미디어(DBpia), 학술연구정보서비스(RISS), 한국학술정보(KISS), 국회도서관의 원문제공 서비스를 이용하여 2002년부터 2017년 까지 발간된 논문 중 뇌졸중', '편마비', '단일대상연구', '단일사례연구', '응용행동분석' 을 주요검색용어를 사용하여 검색하였다. 선별과정을 거쳐 총 24편의 단일대상연구 논문을 선별하여 연구방법과 연구 설계의 질적 수준을 분석하였다. 결과 : 연구 설계 방법으로는 ABA설계가 가장 많았다. 1명이 12(50.0%)으로 가장 많았고, 3명이 8(33.3%)으로 두 번째로 많은 것으로 나타났다. 독립변인으로는 상상훈련이 가장 많이 사용되었다. 종속변인은 상지기능과 편측무시가 가장 많았다. 또한 '기억력', '시각적 주의력', '연하 곤란', '시각-운동 협응', '균형능력', '일상생활활동', '부종' 등의 다양한 목표행동으로 연구가 이루어졌다. 또한 모든 종속 변인에서의 긍정적인 효과가 있는 것으로 나타났다. 질적 수준은 1개 연구를 제외한 연구들이 중간수준 이상인 것으로 나타났다. 결론 : 본 연구는 단일대상 연구 수행 시 갖추어야 할 항목들에 대한 분석하였다는 것에 학문적의의가 있고, 후속연구에서는 본 연구 결과를 바탕으로 지역사회나 임상현장에서 연구를 수행하고 있는 연구자들에게 미약하나마 근거중심설계를 확립하여 양질의 단일대상연구를 수행할 수 있기를 바란다.

소용량 Vancomycin 주사액 조제방법의 차이에 의한 정확성 비교: 단일희석방법과 이중희석방법 (The Comparison of the Accuracy in Preparing Small Vancomycin Dosage : Single vs. Double Dilution Method)

  • 신혜영;서옥경;이숙향;신현택
    • 한국임상약학회지
    • /
    • 제7권2호
    • /
    • pp.86-90
    • /
    • 1997
  • This study was to find a more accurate method fur measuring small vancomycin dosages which are commonly used in neonates by comparing single and double dilution method. For single dilution method, 500 mg of vancomycin powder was accurately measured and reconstituted with 5 ml of distilled water to make a concentration of 100 mg/ml. Volumes of 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, and 0.5 ml, which equal the target dosages of 5, 10, 15, 20, 30, 40, and 50 mg, were measured using syringes made by Shina and each sample was further diluted with 2 ml of $5\%$ dextrose. The solution of 100 mg/ml concentration was further diluted with $5\%$ dextrose to make a concentration of 20 mg/ml. Volumes of 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, and 2.5 ml, which correspond to 5, 10, 15, 20, 30, 40, and 50 mg, were sampled by the same Shina's syringe as in single dilution method and then each sample was further diluted to make a total volume of 10 ml. Each sample was analyzed by HPLC. The measured dosages of each sample in both single and double dilution methods were lower than the target dosages; however, e values in double dilution method were higher than those in single dilution method for seven target dosages. Percent target dosages in single dilution method were 65 to $90\%$, while in double dilution method 91 to $94\%$. Statistically significant difference between two groups was shown in 5, 10, 15, 20, and 40 mg dosages (p<0.05). In conclusion, when preparing small vancomycin dosages lower an 20 mg $(volume{\leq}0.2\;ml)$, using Shina's syringes, the double dilution method has a closer value to the target dosage than single dilution method.

  • PDF

단일 복합 타겟으로 스퍼터 코팅된 CIGS 박막의 형성과 열처리에 따른 미세구조 변화 (The Formation of CIGS Thin Films by Sputter Coating Using Single Composite Target and Change of Microstructure with Heat Treatment)

  • 송영식;김종렬
    • 한국표면공학회지
    • /
    • 제46권2호
    • /
    • pp.61-67
    • /
    • 2013
  • Thin film solar cells have attracted much attention due to their high cell efficiency, comparatively low process cost, and applicability to flexible substrates. In particular, CIGS solar cells have been widely studied and produced because they demonstrated the highest cell efficiency. However, the deposition process of CIGS films generally includes the selenization process conducted at elevated temperature using toxic $H_2Se$ gas. To avoid this selenization process, CIGS thin films were, in this study, deposited by RF sputtering using single composite CIGS target. In addition, the effects of sputtering bias voltage and heat treatment on the microstructural and morphological changes in deposited CIGS films were investigated and discussed.

Bayes Risk를 이용한 False Alarm이 존재하는 환경에서의 단일 표적-다중센서 추적 알고리즘 (On using Bayes Risk for Data Association to Improve Single-Target Multi-Sensor Tracking in Clutter)

  • 김경택;최대범;안병하;고한석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
    • /
    • pp.159-162
    • /
    • 2001
  • In this Paper, a new multi-sensor single-target tracking method in cluttered environment is proposed. Unlike the established methods such as probabilistic data association filter (PDAF), the proposed method intends to reflect the information in detection phase into parameters in tracking so as to reduce uncertainty due to clutter. This is achieved by first modifying the Bayes risk in Bayesian detection criterion to incorporate the likelihood of measurements from multiple sensors. The final estimate is then computed by taking a linear combination of the likelihood and the estimate of measurements. We develop the procedure and discuss the results from representative simulations.

  • PDF

능동소나에서 단일 핑에의한 표적상태분석 (Target State Analysis Based on a Single Ping in Active Sonar)

  • 김재수
    • 한국음향학회지
    • /
    • 제15권4호
    • /
    • pp.65-69
    • /
    • 1996
  • 능동소나운용의 목적은 표적의 탐지 뿐만 아니라, 필요한 경우에는 표적의 분류 및 상태분석을 하는 데에 있다. 본 연구에서는, 3차원 해양환경에서 움직이는 표적의 표적상태를 분석하는 알고리듬에 관하여 2가지 방법을 알고리듬의 적용 가능한 조건의 분석과 시뮬레이션을 통해 장단점을 비교하여 표적상태 분석방법론의 방향을 제시하였다. 표적상태 분석방법은 거리에 따른 표적의 방위에 의한 방법, Range-Doppler Map을 이용하는 방법, 그리고 표적의 궤적을 사용하는 방법으로 구분될 수 있다. R-D Map은 소나 또는 표적이 움직이는 경우에만 적용할 수 있으며, 거리에 대한 표적의 방위각은 정지한 표적 또는 움직이는 표적에 모두 적용할 수 있다. 움직이는 표적의 궤적에 의한 표적상태 추정은 소나의 자체운동에 의한 궤적의 정보가 필수적이다. 시뮬레이션 결과와 장단점의 비교에 의하면 2가지의 방법은 독립적인 것이 아니라 서로 보완적으로 사용되어야 할 것으로 결론지어 진다.

  • PDF

MCNP6 코드를 이용한 컨테이너 보안 검색용 전자 선형가속기 표적에서 발생한 광자 평가에 관한 연구 (A Study on Photon Characteristics Generated from Target of Electron Linear Accelerator for Container Security Inspection using MCNP6 Code)

  • 이창호;김장오;이윤지;전찬희;이지은;민병인
    • 한국방사선학회논문지
    • /
    • 제14권3호
    • /
    • pp.193-201
    • /
    • 2020
  • 본 연구 목적은 선형가속기를 통해 입사된 전자가 표적(target)을 구성하는 물질과 두께에 따른 광자 특성을 평가하는 것이다. 전산모사 설계는 2 mm 두께의 텅스텐 단일물질과 1.8 mm 와 2.3 mm 두께의 텅스텐과 구리 복합물질로 구성된 선형가속기 표적(Target)이다. 연구 방법은 첫째, 표적 내 일차 입자의 거동은 전자플루언스와 전자 에너지 축적으로 평가하였다. 둘째, 표적 내에서 발생하는 광자는 광자 플루언스로 평가하였다. 셋째, 표적으로부터 1 m 거리에서의 광자 각-에너지 분포는 광자 플루언스로 평가하였다. 그 결과 첫째, 단일물질과 복합물질 표적에서의 전자 플루언스와 에너지 축적을 통해 일차 입자인 전자가 표적 밖으로 방출되지 않았으며, 표적 두께에 따라 전자가 음의 선형적으로 감쇄하였다. 둘째, 복합물질 표적이 단일물질 표적보다 광자 생성이 더 높은 것으로 나타났다. 이는 물질 구성 성분과 두께가 광자 생성에 영향을 준다는 사실을 확인하였다. 셋째, 차폐 해석에 필요한 각 분포에 따른 광자 플루언스를 계산하였다. 이러한 결과는 선형가속기 표적을 구성하는 물질과 두께에 따라 광자 생성률이 차이 나는 것을 확인할 수 있었다. 따라서, 본 연구는 국가에서 도입 중인 컨테이너 보안 검색용 선형가속기 사용시설의 설계 및 운영 시 필요한 자료이며, 방사선 방호에 기초 자료로 활용될 수 있을 것으로 생각된다.

프랙탈 나무 모델을 이용한 숲 속에 숨어 있는 타겟의 산란모델 (Scattering Model for Hard Target Embedded inside Forest Using Physics-based Channel Model Based on Fractal Trees)

  • 고일석
    • 한국전자파학회논문지
    • /
    • 제16권2호
    • /
    • pp.174-181
    • /
    • 2005
  • 이 논문에서는 숲 속에 숨어있는 타겟의 산란 특성을 계산할 수 있는 효율적인 모델을 계발한다. 이 산란모델은 숲의 산란 특성을 계산하기 위해 프랙탈 기하학과 single scattering 이론을 사용하는 channel model과 타겟 자체의 산란 특성을 계산하기 위해 physical optic(PO) 근사법을 사용하는 hybrid 모델이다. 그리고 전체 모델의 계산량을 줄이기 위해 가역정리를 사용하여 간단하게 타겟과 숲 사이의 상호 작용을 계산한다.

An integrated DNA barcode assay microdevice for rapid, highly sensitive and multiplex pathogen detection at the single-cell level

  • Jung, Jae Hwan;Cho, Min Kyung;Chung, So Yi;Seo, Tae Seok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.276-276
    • /
    • 2013
  • Here we report an integrated microdevice consisting of an efficient passive mixer, a magnetic separation chamber, and a capillary electrophoretic microchannel in which DNA barcode assay, target pathogen separation, and barcode DNA capillary electrophoretic analysis were performed sequentially within 30 min for multiplex pathogen detection at the single-cell level. The intestine-shaped serpentine 3D micromixer provides a high mixing rate to generate magnetic particle-pathogenic bacteria-DNA barcode labelled AuNP complexes quantitatively. After magnetic separation and purification of those complexes, the barcode DNA strands were released and analyzed by the microfluidic capillary electrophoresis within 5 min. The size of the barcode DNA strand was controlled depending on the target bacteria (Staphylococcus aureus, Escherichia coli O157:H7, and Salmonella typhimurium), and the different elution time of the barcode DNA peak in the electropherogram allows us to recognize the target pathogen with ease in the monoplex as well as in the multiplex analysis. In addition, the quantity of the DNA barcode strand (~104) per AuNP is enough to be observed in the laser-induced confocal fluorescence detector, thereby making single-cell analysis possible. This novel integrated microdevice enables us to perform rapid, sensitive, and multiplex pathogen detection with sample-in-answer-out capability to be applied for biosafety testing, environmental screening, and clinical trials.

  • PDF

표적이 일시적으로 가려지는 환경에서 ITS 기법을 이용한 영상 표적 추적 알고리듬 연구 (A Study of Image Target Tracking Using ITS in an Occluding Environment)

  • 김용;송택렬
    • 제어로봇시스템학회논문지
    • /
    • 제19권4호
    • /
    • pp.306-314
    • /
    • 2013
  • Automatic tracking in cluttered environment requires the initiation and maintenance of tracks, and track existence probability of true track is kept by Markov Chain Two model of target existence propagation. Unlike Markov Chain One model for target existence propagation, Markov Chain Two model is made up three hypotheses about target existence event which are that the target exist and is detectable, the target exists and is non-detectable through occlusion, and the target does not exist and is non-detectable according to non-existing target. In this paper we present multi-scan single target tracking algorithm based on the target existence, which call the Integrated Track Splitting algorithm with Markov Chain Two model in imaging sensor.

탐지시스템의 SNR에 의한 물체인식능력산출 (The Calculation of Target Recognition rate by SNR of a Detection System)

  • 김도현;신재호;배정이
    • 대한전자공학회논문지
    • /
    • 제27권5호
    • /
    • pp.690-698
    • /
    • 1990
  • Among the target identification algorithms presented up to now, the NNR algorithm utilize multifrequency and single observation method. But it is generally known that its implementation is extremely difficult. In this paper a new identification algorithm using the single frequency and cumulative observation method was proposed. The simulation result shows that the proposed algorithm with 31 observation and accumulation is more effective and realizable than the NNR with 3 freqnencies when the noise level n is below 0.3.

  • PDF