• Steel and Composite Structures
• /
• v.46 no.1
• /
• pp.53-73
• /
• 2023

Man-made structure materials like concrete usually contain inclusions. These inclusions affect the mechanical properties of concrete. In this investigation, the influence of inclusion length and inclination angle on three-dimensional failure mechanism of concrete under uniaxial compression were performed using experimental test and numerical simulation. Approach of acoustic emission were jointly used to analyze the damage and fracture process. Besides, by combining the stress-strain behavior, quantitative determination of the thresholds of crack stress were done. concrete specimens with dimensions of 120 mm × 150 mm × 100 mm were provided. One and two holes filled by gypsum are incorporated in concrete samples. To build the inclusion, firstly cylinder steel tube was pre-inserting into the concrete and removing them after the initial hardening of the specimen. Secondly, the gypsum was poured into the holes. Tensile strengths of concrete and gypsum were 2.45 MPa and 1.5 MPa, respectively. The angle bertween inclusions and axial loadind ary from 0 to 90 with increases of 30. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Diameter of the hole was 20 mm. Entirely 20 various models were examined under uniaxial test. Simultaneous with experimental tests, numerical simulation (Particle flow code in two dimension) were carried out on the numerical models containing the inclusions. The numerical model were calibrated firstly by experimental outputs and then failure behavior of models containing inclusions have been investigated. The angle bertween inclusions and axial loadind vary from 0 to 90 with increases of 15. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Entirely 32 various models were examined under uniaxial test. Loading rate was 0.05 mm/sec. The results indicated that when inclusion has occupied 100% of sample thickness, two tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusion has occupied 75% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusions have occupied 50% and 25% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. Also the inclusion was failed by one tensile crack. The compressive strength of samples decease with the decreases of the inclusions length, and inclusion angle had some effects on that. Failure of concrete is mostly due to the tensile crack. The behavior of crack, was affected by the inclusion length and inclusion number.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.21-32
• /
• 2023

Interrill erosion dominates in forest areas, and the erosion rate in surface-disturbed areas is significantly increased by the development and expansion of rill. In this study, soil erosion experiments using simulated rainfall and inflow were performed to understand the development and the micromorphological changes of rill on steep slopes. The characteristic factors of the micromorphology, such as the rill cross section, rill volume, rill density, rill order, and rill sharpness, were analyzed according to steepness and location (upper or lower) of slope. The head-cut of the simultaneous incised rills by rainfall simulation moved rapidly upslope, and the randomly developed rills expanded deeply and widely with their connection. The rill cross section evolved to downslope gradually increased. The rill volume occupied about 78 % of the sediment volume, confirming that the contribution of the sediment from the rill erosion is greater than that of the interrill erosion. Although the rate of increase in rill order slowed as the slope increased, the total length and density of the rill generally increased. As the slope increased from 15° to 20°, the bed incision of rills became larger than the sidewall expansion, and the rill sharpness increased by 1.6 times. The runoff coefficient on the lower slope decreased by 12.3 % than that on the upper slope. It was evaluated that the subsoil exposures and formation changes by the rill expansion increased the infiltration rate. Although the sediment accompanying the rills generally increased with slope increase, it was directly influenced by the hydraulic velocity of enhanced rill with the local convergence and expansion in the process of the rill evolution.

• Analytical Science and Technology
• /
• v.21 no.5
• /
• pp.412-423
• /
• 2008

A procedure based on solid-phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry has been developed for the simultaneous analysis of 55 basic drugs in equine urine. The test scope covers diversified classes of drugs including some ${\beta}$-blockers, ${\beta}$-agonists, antihypotensives, CNS stimulants, sedatives, tranquilizers, antidepressants, antihypertensives and so on. LC-MS/MS separation and quantification was carried out in positive electrospray ionization and multiple reaction monitoring (MRM) mode. Four different brands of mixed mode cation exchange SPE sorbents; UCT XTRACT$^{(R)}$ XRDAH, Supelco DSC-MCAX$^{(R)}$, Varian Bond Elut Certify$^{(R)}$ and Waters Oasis$^{(R)}$ MCX were compared. The UCT XTRACT$^{(R)}$ XRDAH sorbent provided the best results in the preconcentration of samples, yielding relative recoveries higher than 80% except for terbutaline (41.3%), salbutamol (71.5%), heptaminol (70.7%), phenylpropanolamine (66.3%). Detection limits of the target drugs provided by the proposed analytical procedure were between 0.2~8.3 ng/mL.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.543-552
• /
• 2008

This paper described the relatively sensitive and simultaneous analytical method for 3-monochloropropane-1,2-diol (3-MCDP, $C_3H_7ClO_2$, MW. 110) as well as 1,3-dichloropropan-2-ol (1,3-DCP, $C_3H_6Cl_2O$, MW. 128) in various foods. Food samples were homogenized in 5M NaCl solution, mixed with aluminum oxide and eluted with dichloromethane. The extracted chloropropanols were concentrated by rotary evaporator and $N_2$ blow serially were derivatized with HFBA (Heptafluorobutyric anhydride, $C_8F_{14}O_3$, MW. 410) and were determined by GC/MS using isotope dilution method. The characteristic molecular ions at m/z 253, 275, 289, 291, and 453 for HFBA derivatives of 3-MCPD (MW. 502) and 110, 275, and 277 for HFBA derivatives of 1,3-DCP (MW. 325) were chosen in selected ion mode. The method validation data showed sufficiently good properties of LOD (0.003 mg/kg), LOQ (0.010 mg/kg), linearity ($R^2{\geq}0.999$ at 0.010~1.000 mg/kg), and recovery rate (${\approx}97%$). The levels of chloropropanols in soy sauce, sauces, processed meat products, fishery products, and seasonings (n=56/157) determined by the presented method were 0.0~0.3 mg/kg.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2A
• /
• pp.259-267
• /
• 2008

The ultimate strengths of reinforced concrete deep beams are governed by the capacity of the shear resistance mechanism composed of concrete and shear reinforcing bars, and the structural behaviors of the beams are mainly controlled by the mechanical relationships according to the shear span-to-effective depth ratio, flexural reinforcement ratio, load and support conditions, and material properties. In this study, a simple indeterminate strut-tie model reflecting all characteristics of the ultimate strengths and complicated structural behaviors is presented for the design of simply supported reinforced concrete deep beams. In addition, a load distribution ratio, defined as a magnitude of load transferred by a vertical truss mechanism, is proposed to help structural designers perform the design of simply supported reinforced concrete deep beams by using the strut-tie model approaches of current design codes. In the determination of a load distribution ratio, a concept of balanced shear reinforcement ratio requiring a simultaneous failure of inclined concrete strut and vertical steel tie is introduced to ensure the ductile shear failure of reinforced concrete deep beams, and the prime design variables including the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete influencing the ultimate strength and behavior are reflected upon based on various and numerous numerical analysis results. In the companion paper, the validity of presented model and load distribution ratio was examined by employing them to the evaluation of the ultimate strengths of various simply supported reinforced concrete deep beams tested to failure.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.2
• /
• pp.246-253
• /
• 2007

Mineral and volatile flavor compounds of Pimpinella brochycarpa N., a perennial Korean medicinal plant of the Umbelliferae family, were analyzed by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and simultaneous steam distillation extract (SDE)-gas chromatography mass spectrometry (GC/MS), head space solid phase micro-extraction (HS-SPME)-GC/MS. Mineral contents of the stalks and leaves were compared and the flavor patterns of the fresh and the shady air-dried samples were obtained by the electronic nose (EN) with 6 metal oxide sensors. Principal component analysis (PCA) was carried out using the data obtained from EN. The 1st principal values of the fresh samples have + values and the shady air-dried have - values. The essential oil extracted from the fresh and the shady air-dried by SDE method contain 58 and 31 flavor compounds. When HS-SPME method with CAR/PDMS fiber and PDMS fiber were used, 34 and 21 flavor compounds. The principal volatile components of Pimpinella brachycarpa N. were ${\alpha}$-selinene, germacrene D, and myrcene.

• Korean Journal of Pharmacognosy
• /
• v.54 no.2
• /
• pp.72-79
• /
• 2023

MRSA is Staphylococcus aureus resistant to β-lactam antibiotics, and is a worldwide infectious disease. Even with the discovery of new antibiotics, resistance develops rapidly, so new alternatives are needed. Jakyakgamcho-tang (JGT) is a combination of Jakyak and Gamcho, and has been mainly used as an antispasmodic and analgesic in oriental medicine. This study was conducted to find out whether there is an effect on MRSA in relation to the anti-inflammatory effect of JGT and the antibacterial effect of Jakyak and Gamcho found in previous studies. In this study, in order to investigate the antibacterial activity of JGT and the combined effect of existing antibiotics, after extracting JGT with 70% EtoH, the disc diffusion method, minimum inhibitory concentration (MIC), drug combination effect (FICI), and time-kill analysis (Time-kill assay), metabolic inhibition, Western blot and qRT-PCR analysis were used to confirm the antibacterial activity mechanism of MRSA of JGT. As a result of the experiment, all of MRSA showed antibacterial activity in JGT's disc diffusion method, and the MIC was 250-1000 ㎍/mL. When existing antibiotics and JGT were combined with drugs, most had synergy or partial synergy. In addition, it was confirmed that the degree of bacterial growth was suppressed over time when simultaneous administration for 24 hours. JGT showed a synergistic effect when administered together with the ATPase-inhibitor DCCD, suggesting that it affected the inhibition of ATPase. As a result of observing the expression of PBP2a, and hla protein in the JGT-treated group and the untreated control group through wstern blot, it was confirmed that the protein expression of the JGT-treated group was significantly suppressed, and the expression levels of mecA, mecR1 and hla genes were also suppressed during JGT treatment. was observed by qRT-PCR. Combining the results of the experiment, it can be seen that JGT has antibacterial activity in MRSA, and when combined with existing antibiotics, the effect was increased compared to treatment with the drug alone. This suggests that JGT can be an alternative to treatment for antibiotic resistance of MRSA.

• 한국노년학
• /
• v.31 no.3
• /
• pp.607-621
• /
• 2011

Purpose The purpose of this study was to examine the relationship between physical activities, sleep disturbance, and health related quality of life (HRQOL) in patients with chronic obstructive pulmonary disease (COPD). Methods A descriptive survey design used pretest dataset of COPD symptom management intervention study (N=245). Measures included the international physical activity questionnaire, the COPD and asthma sleep impact scale, and the St. George's respiratory questionnaire of HRQOL. The data were analyzed using descriptive analysis, t-test, ANOVA, Pearson correlation coefficients, and simultaneous multiple regression by the SPSS WIN 18.0 program. Results The mean scores (SD) of HRQOL and sleep disturbance were 36.04 (19.43) and 14.33 (6.20), respectively. About 32% of participants were physically inactive. The multivariate approach showed the patients who have more sleep disturbance (β=.27), lower levels of FEV1 % predicted (β=-.23), lower physical activities (β=-.19), lower household income (β=-.16), and diagnosed longer than 5 years (β=.14) reported lower HRQOL (R²=.34). Conclusion The findings of this study suggest that improving the quality of sleep and physical activities can be efficient strategies for HRQOL in patients with COPD. Future research in enhancing HRQOL through improving sleep quality and physical activities is needed.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.2
• /
• pp.179-203
• /
• 2011

The purpose of the study is 1) to investigate the reciprocal relationship between cognitive functioning and depressive symptoms and 2) to examine whether there is gender difference in this mutual relationship. The uniqueness of the current study is in its investigation on the simultaneous reciprocal relationship between cognitive functioning and depressive symptoms, which is different from previous studies examining unidirectional relationship. Subjects were 3,511 individuals aged 65 and over who participated in the first and second wave of Korean Longitudinal Study of Ageing. Non-recursive structural equation modeling identified the reciprocal relationship between cognitive functioning and depressive symptoms, with poorer cognitive functioning leading to higher depressive symptoms and higher depressive symptoms resulting in poorer cognitive functioning. Multi-group analysis showed the gender difference in the relationship between cognitive functioning and depressive symptoms. Specifically, cognitive functioning was the significant predictor of depressive symptoms for females, whereas the depressive symptoms was the significant predictor of cognitive functioning for males. These findings indicate that the reciprocal relationship and gender difference should be considered when we development practice implications for prevention and treatment related to depression and cognitive functioning. Based on these findings, implications for theory and practice were discussed.

• Economic Analysis
• /
• v.25 no.2
• /
• pp.132-176
• /
• 2019

We use a time-varying parameter vector auto regression (TVP-VAR) model to understand the impact of U.S. monetary policy normalization on Korean financial markets and capital accounts. The U.S. monetary policy is represented by the federal funds rate, term premium and credit spread. During the U.S. monetary contraction period of 2004 to 2006, changes in the federal funds rate presented negative pressure on Korean financial markets. The changes in federal funds rate also led to a simultaneous contraction in inward and outward capital flows. However, the effects of a federal funds rate shock has been reduced since 2015. On the other hand, the effects of U.S. term premiums is getting stronger after the period of quantitative easing (QE). The influence of the U.S. credit spread also significantly increased after the global financial crisis. Simulation results show that a rise in the U.S. credit spread, which can be triggered by a contractionary monetary policy, can pose a larger adverse impact on the Korean economy than a rise in the federal funds rate itself. As for capital flows, a U.S. monetary policy contraction causes an outflow of foreign investment, but the repatriation of overseas investment by Korean residents can offset this outflow.