• The Journal of Information Technology
• /
• v.6 no.3
• /
• pp.1-10
• /
• 2003

This paper is concerned with a power line channel modeling for the more fast and efficiently power line communication experiment. A capacitor load channel simulator is a essential equipment in the power line modem development for in-house network. We accomplished a channel modelling by the frequency response method about the total 298 capacitor load channels. This channel data is acquired by the capacitor load simulator modeling a real power line channel environment. When the experiment results acquired from the capacitor load simulator were compared with the result from a channel filter, we confirmed to substitute capacitor load experiments on the actual power line communication without big error.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.325-330
• /
• 2018

In this paper, we investigated the impedance method for searching fault detection point in case of an accident in the AC electric railway AT feeding system. For this purpose, simulation circuit modeling and prototype hardware are made based on the known numerical analysis. As a result of simulation modeling of the feeding system based on the numerical analysis of the impedance method confirmed that the modeling was properly implemented with an average error rate of 0.07%. Also, as a result of fault event by hardware simulator, it was confirmed that the breaker operation time is shortened and the fault current is decreased while the voltage is close to the supply voltage in the transient state as the point of the fault accident moves away from the substation(SS).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.291-304
• /
• 1999

In this work, a mathematical modeling of SAW coupled mode in SAW resonator filter, which is very useful in analyzing the characteristics of periodic electrode structure such as SAW reflective array and inter-digital transducers. was considered by mathematical analytic approach. The design and simulation method for resonator filter was also proposed by equivalent transduction matrix using this mathematical modeling. In order for a designer to simulate, and to design the coupled mode SAW resonator filters effectively that could be applied to mobile communication system, a design simulator for coupled mode filter was implemented by graphic user interface, and it was investigated by designing and analyzing practical SAW coupled mode resonator filter from a view point of application of this simulator.

• Membrane Journal
• /
• v.7 no.1
• /
• pp.31-38
• /
• 1997

A simulator has been developed in order to simulate and to be used to design the pervaporation system for separating organic/water mixtures. This simulator is composed of simulation engine, which includes a modeling of pervaporation system and the numerical analysis, and Graphical User Interface(GUI), which enables us to operate the simulator more easily in the Windows environment. The structure and operation of simulator were clearly presented by demonstrating the full-scale ethanol dehydration process. The performance of simulator turned out to be fairly good through comparing the simulation results with the experimental data of ethanol dehydration pilot tests.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.540-549
• /
• 2001

An implementation method for chip-mounter simulator is proposed to improve the productivity and utility of electronic assembly lines. The simulator emulates the assembly sequence graphically to verify the chip mounter program in offline. It also presents functions of time estimation and productivity analysis considering the error probability. To increase the flexibility of simulator, stochastic petri nets are applied to modeling of the assembly sequence. The sequence model is then implemented as extendable classes by an object oriented language. The simulator is applied to a commercial chip mounter to verify the usefulness of the method proposed.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.284-289
• /
• 2014

In this paper, modeling of a gate/body-tied (GBT) PMOSFET photodetector with built-in transfer gate is performed. It can control the photocurrent with a high-sensitivity. The GBT photodetector is a hybrid device consisted of a MOSFET, a lateral BJT, and a vertical BJT. This device allows for amplifying the photocurrent gain by $10^3$ due to the GBT structure. However, the operating parameters of this photodetector, including its photocurrent and transfer characteristics, were not known because modeling has not yet been performed. The sophisticated model of GBT photodetector using a process simulator is not compatible with circuit simulator. For this reason, we have performed SPICE modeling of the photodetector with reduced complexity using Cadence's Spectre program. The proposed modeling has been demonstrated by measuring fabricated chip by using 0.35 im 2-poly 4-metal standard CMOS technology.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.142-152
• /
• 2001

The roles and importance of the application of simulator in harbor and waterway design are emphasized. Different methods of simulation and their application are described. A large-scale simulation concept, group simulation, is proposed. Requirements of the simulator for accomplishing the tasks properly and effectively are suggested. Some points on modeling of ship hydrodynamics and environmental factors, welch are critical especially in waterway design simulation are discussed and algorisms presented.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1161-1164
• /
• 1998

We designed a DSP core simulator with C language, that is able to simulate 5-stage pipelined DSP core, named YS-DSP. It can emulate all 5 stage pipelines in the DSP core. It can also emulate memory access, exception processing, and DSP parallel processing. Each pipeline stage is implemented by combination of one or more functions to process parts of each stage. After modeling and validating the simulator, we can use it to verify and to complement the DSP core HDL model and to enhance its performance.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.227-232
• /
• 1998

We developed a Off-Line Graphic Simulator which can simulate a robot model in 3D graphics space in Windows 95 version. 4 axes SCARA robot was adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed program. The interface between users and the off-line program system in the Windows 95's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D graphics.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2002

The electronic ballast have much more shaking of arc than magnetic ballast because of acoustic resonance phenomenon. but it has used mare than before. In this paper, we made metal halide lamp modeling by modifying modeling of mercury lamp. To avoid acoustic resonance phenomenon, We calculated acoustic resonance frequency band. We proposed design of LCC circuit. Also, electronic ballast simulator for metal halide lamp was developed by simulink LCC parameters of inverter was decided on the basis of simulation results. After development of prototype ballast, it was verified the characteristics of simulator.