• Journal of Internet Computing and Services
• /
• v.9 no.6
• /
• pp.179-188
• /
• 2008

Even though a lot of researches to improve the performance of TCP over wireless networks have been performed, the performance of TCP cannot satisfy users under high packet loss rate of wireless networks. This paper addresses the problem of TCP Westwood under high packet loss rate and reveals the reasons through the extensive simulation analysis. The ABE(Available Bandwidth Estimation) of TCP westwood becomes incorrect due to TCP dynamics of loss recovery. Based on this observation, we propose two algorithms for enhancing the correctness of ABE. We have evaluated the effects of the proposed algorithms through simulation. The proposed algorithms have achieved more correct ABE under the packet loss rate less than 1%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.65-69
• /
• 2001

Network Management become more and more important issue in the network environment in which many applications such as Mail, teleconferencing, WWW and database software are operated. It can be possible for The Bridge and flouter forwarding data to select next hop device which results in routing incorrect path from the viewpoint of network design. In this paper we address the problem of finding the detour routing path due to incorrect setting on routing devices. We propose the new algorithm for finding detour routing path based on hierarchical network structure analysis using information from SNMP MIB. To prove the correctness of the proposed algorithm we have done simulation with predefined data. Simulation results show that the algorithm finds detour path correctly

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1442-1448
• /
• 2003

Network Management become more and more important issue in the network environment in which many applications such as Mail, teleconferencing, WWW and database software are operated. It can be possible for The Bridge and Router forwarding data to select next hop device which results in routing incorrect path from the viewpoint of network design. In this paper we address the problem of finding the detour routing path due to incorrect setting on routing devices. We propose the new algorithm for finding detour muting path based on hierarchical network structure analysis using information from SNMP MIB. To prove the correctness of the unposed algorithm we have done simulation with predefined data. Simulation results show that the algorithm finds detour path correctly.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.469-478
• /
• 2015

In order to promote the application of switched reluctance machines (SRM) in electric vehicles (EVs), the braking torque closed-loop control of a SRM is proposed. A hysteresis current regulator with the soft chopping mode is employed to reduce the switching frequency and switching loss. A torque estimator is designed to estimate the braking torque online and to achieve braking torque feedback. A feed-forward plus saturation compensation torque regulator is designed to decrease the dynamic response time and to improve the steady-state accuracy of the braking torque. The turn-on and turn-off angles are optimized by a genetic algorithm (GA) to reduce the braking torque ripple and to improve the braking energy feedback efficiency. Finally, a simulation model and an experimental platform are built. The simulation and experimental results demonstrate the correctness of the proposed control strategy.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.433-444
• /
• 2005

In video-on-demand(VOD) systems, a broadcast-based scheduling mechanism is known to be a very efficient technique for disseminating popular videos to very large client populations. The main motivations of broadcasting scheduling mechanisms are that they scale up extremely well and they have very modest bandwidth requirements. This paper proposes a new dynamic broadcasting scheduling mechanism, named FDBS (fast dynamic broadcasting scheme), and proves its correctness. This paper also evaluates the performance of FDBS on the basis of a simulation approach. The simulation results indicate that FDBS shows a superior performance over UD, CBHD, and NPB in terms of the average response time with very reasonable bandwidth requirements.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.655-664
• /
• 2019

In order to analyze the nonlinear phenomena of the bifurcation and chaos caused by the switching of nonlinear switching devices in inductively coupled power transfer (ICPT) systems, a Jacobian matrix model, based on discrete mapping numerical modeling, is established to judge the system stability of the periodic closed orbit and to study the nonlinear behavior of Hopf bifurcation in a system under full resonance. The general flow of the parameter design, based on the stability principle for ICPT systems, is proposed to avoid the chaos and bifurcation phenomena caused by unreasonable parameter selection. Firstly, based on the state equation of SS-type compensation, a three-dimensional bifurcation diagram with the coupling coefficient as the bifurcation parameter is established with a numerical simulation to observe the nonlinear phenomena in the system. Then Filippov's method based on a Jacobian matrix model is adopted to deduce the boundary of stable operation and to judge the type of the bifurcation in the system. Then the general flow of the parameter design based on the stability principle for ICPT systems is proposed through the above analysis to realize stable operation under the conditions of weak coupling. Finally, an experimental platform is built to confirm the correctness of the numerical simulation and modeling.

• Geomechanics and Engineering
• /
• v.30 no.2
• /
• pp.153-167
• /
• 2022

This study proposes a method to analyze the distribution of coal porosity disturbances after the excavation of ultra-large-diameter water jet boreholes using a coal wetting and softening model. The high-pressure jet is regarded as a short-term high-pressure water injection process. The water injection range is the coal softening range. The time when the reference point of the borehole wall is shocked by the high-pressure water column is equivalent to the time of high-pressure water injection of the coal wall. The influence of roadway excavation with support and borehole diameter on the ultra-large-diameter jet drilling excavation is also studied. The coal core around the borehole is used to measure the gas permeability for determining the porosity disturbance distribution of the coal in the sampling plane to verify the correctness of the simulation results. Results show that the excavation borehole is beneficial to the expansion of the roadway excavation disturbance, and the expansion distance of the roadway excavation disturbance has a quadratic relationship with the borehole diameter. Wetting and softening of the coal around the borehole wall will promote the uniform distribution of the overall porosity disturbance and reduce the amplitude of disturbance fluctuations.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.140-143
• /
• 2003

In this paper, we present a probabilistic approach to determining whether extracted facial features from a video sequence are appropriate for creating a 3D face model. In our approach, the distance between two feature points selected from the MPEG-4 facial object is defined as a random variable for each node of a probability network. To avoid generating an unnatural or non-realistic 3D face model, automatically extracted 2D facial features from a video sequence are fed into the proposed probabilistic network before a corresponding 3D face model is built. Simulation results show that the proposed probabilistic network can be used as a quality control agent to verify the correctness of extracted facial features.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.2
• /
• pp.40-49
• /
• 1998

In this paper, we propose an efficient per-Trunk interworking mechanism between PSTN and ATM network assuming the situation ATM network interworks with PSTN during the evolution period. The proposed mechanism improves the cell payload utilization by mapping only the active charnnels of PSTN frame into ATM cell payload. Also, we propose the frame recovery mechanism to guarantee the frame sequence integrity. The proposed mechanism is compared with other possible ones in terms of cell payload utilization, cell packetization delay. We present the implementation structure of the interworking unit. the correctness of the mechanism and the feasibility of the implementation are verifid through the CAD simulation.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1499-1507
• /
• 2015

High voltage direct current transmission based on modular multilevel converter (MMC-HVDC) is one of the most promising power transmission technologies. In this study, the mathematical characteristics of MMC-HVDC are analyzed in a synchronous rotational reference frame. A hybrid current vector controller based on proportional integer plus resonant is used to uniformly control the DC and double-base frequency AC currents under unbalanced grid voltage conditions. A corresponding voltage dependent current order limiter is then designed to solve the overcurrent problems that may occur. Moreover, the circulating current sequence components are thoroughly examined and controlled using a developed circulating current suppressor. Simulation results verify the correctness and effectiveness of the proposed control schemes.