• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.610-614
• /
• 2004

Recently, an active-clamp, full-bridge boost converter has been actively studied for high-power applications such as power factor correction and battery discharger. However, DC and AC modeling for this converter has not conquered. In this paper, a DC and small-signal AC modeling for the active-clamp, full-bridge boost converter is described. Based on the operation principle, the ac part of the converter can be replaced by a do counterpart. Then, a conceptual equivalent circuit is derived by rearranging the switches. The equivalent circuit for this converter consists of CCM (Continuous conduction mode) boost and DCM (Discontinuous conduction mode) buck converter. The analyses for the equivalent CCM boost and DCM buck converter are done using the model of PWM switch. The theoretical modeling results are confirmed through experiment or SIMPLIS simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.239-244
• /
• 2009

This paper suggests a precision positioning control technique of a precision positioning stage with coupling effects. The precision positioning stage is supported by four flexible spring hinges and driven by two piezoelectric actuators. The dynamic characteristics of the precision positioning stage is modeled and identified by the FEM analysis. The dynamic characteristics of the stage are also identified by the frequency domain modeling technique based on the experimental data. Reliability of two modeling methods is examined by comparing the numerically and experimentally produced responses of the stage. This paper proposes a sliding mode control technique with integrator to improve the tracking ability of the precision positioning stage to the complex input signal using. To demonstrate the effectiveness of the proposed modeling schemes and control algorithm, experiment validations are performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1957-1962
• /
• 2003

In order to design the phantom of heart, we have developed the multi-dipole current source system. Such a one be clue to the various motion of heart. The magnetocardiograph (MCG) system for diagnosing the disease of the heart due to an analysis of the heart signal. The multidipole current source system be built by microprocessor. We use the shield room to obtain a good experimental result. Then the signal acquired is mixed with a background noise, through a filtering extracts a pure signal. The pure signal such a heart phantom is analyzed by an electromagnetic map.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.99-105
• /
• 2009

This paper suggests novel signal processing methods for optimal beamforming of smart antenna system in CDMA2000 mobile communication environments. This method utilize characteristics of the reverse pilot channel of CDMA2000 mobile communication systems, and applies them to improve the performance of an adaptive algorithm, which is used to a smart antenna system for beamforming. To perform the best beamforming, it is important to get an exact beamforming algorithm. This paper proposed an algorithm based on Laglange multiplier which has such an adaptive process, and also proposed the method to demodulate the received signal through array antenna using pilot channel in CDMA2000 environment. This paper analysed the enhanced performance of proposed algorithm in various signal environment through signal modeling of physical layer in CDMA2000 reverse link.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.385-391
• /
• 2007

A class D digital audio amplifier with small size, low cost, and high quality is positively necessary in the multimedia era. Since the digital audio amplifier is based on the PWM signal processing, it is improper to analyze the principle of signal generation using linear system theories. In this paper, a class D digital audio amplifier based ADSM (Advanced Delta-Sigma Modulation) is considered. We first model the digital audio amplifier and then explain the operation principle using variable structure control algorithm. Moreover, the ripple signal generated by the hysteresis in the comparator has a significant effect on the system performance. Thus, we present a method to find the magnitude and the frequency of the ripple signal using describing function. Finally, simulations and experiments are provided to show the validity of the proposed methods.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.342-344
• /
• 2004

In conventional small signal stability analysis, system is assumed to be invariant and the state space equations are used to calculate the eigenvalues of state matrix. However, when a system contains switching elements such as FACTS devices, it becomes non-continuous system. In this case, a mathematically rigorous approach to system small signal stability analysis is by means of eigenvalue analysis of the system periodic transition matrix based on discrete system analysis method. In this research, RCF(Resistive Companion Form) method is used to analyse small signal stability of a non-continuous system including switching elements'. Applying the RCF method to the differential and integral equations of power system, generator, controllers and FACTS devices including switching elements should be modeled in the form of state transition matrix. From this state transition matrix eigenvalues which are mapped to unit circle can be calculated.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3E
• /
• pp.24-31
• /
• 1997

A mobile propagation characteristics for wideband DS-SS (Direct Sequence-Spectrum) signal is presented. Existing narrowband model is extended for the wideband pulse with an arbitrary shape. The received DS-SS signal in the frequency domain is the transfer function of the propagation channel weighted by the inverse Fourier transform. In this proposed method, received signal spectral density, instantaneous waveform, and Doppler spectrum of DS-SS signal via either Rayleigh of Rician channel can be obtained easily. Simulation results match well with both simulated theoretical fading statistics and classical theory. As expected, the extraction of chip timing in Rician fading shown to be more tractable than Rayleigh fading.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.11-19
• /
• 1998

A signal line potential variation due to the delta-I noise was physically investigated in CMOS integrated circuits. An equivalent circuit for the noise analysis was presented. The signal line was modeled as segmented RC-lumped circuits with the ground noise. Then the equivalent circuit was mathematically analyzed. Therebvy a new signal line potential variation model due to the switching mosie was developed. Th emodel was verified with 0.35.mu.m CMOS deivce model parameters. The model has an excellent agreement with HSPICE simulation. Thus the proposed model can be dirctly employed in the industry to design the high-performance integrted circuit design as well as integrated circuit package design.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.8
• /
• pp.1-7
• /
• 1997

In tis paper, w eproposed a modeling for direct-sequence spread communication base band modem in RT-level VHDL and implemented in a one-chip VLSI and tested. The transmitter modulates with DQPSK modulation method and spreads a modulated signal with 32-bit PN code into 1.152MHz. The receiver de-spreads a signal using 32-tap matched filter and recovers with DQPSK demodulation method. The digital frequency synthesizer generates the sine signal and the cosine signal of 2.304MHz with ROM tables in the size of 7$\^$*/256 and 6$\^$*/256, respectively. The implemented VLSI has been verified a BER with 10$\^$-4/ at E$\_$b//N$\_$o/ of 13dB with a SPW fixed design model and fabricated in the 0.8.mu.m KG6423 gate array with a VHDL model.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.400-407
• /
• 2011

Modeling and analysis of high-dimensional spectral data provide an opportunity to uncover inherent patterns in various information-rich data. Orthogonal signal correction (OSC) a preprocessing technique has been widely used to remove unwanted variations of spectral data that do not contribute to prediction or classification. In the present study we propose a novel OSC algorithm called adjusted direct OSC to improve visualization and the ability of classification. Experimental results with real mass spectral data from condom lubricants demonstrate the effectiveness of the proposed approach.