• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.947-949
• /
• 1987

This paper describes the design of echo cancslling method(ECM) for transmission with full-duplex which ie transmitted on "2B+D"(144kbps)data through two-wire loop plants. The design objective is 40dB attenuation with a signal-to-noise ratio of $10{\sim}20dB$. Since the transhybrid loos can be as low as $6{\sim}10dB$, the required attenuation of the echo signal is on the order of $50{\sim}55dB$. The used algorithms based on the sign algorithm, and have been improved by using adoptive reference voltage level algorithm.

• Structural Engineering and Mechanics
• /
• v.21 no.2
• /
• pp.121-136
• /
• 2005

This paper presents the implementation of the Blatz-Ko hyperelastic compressible model in a finite element program to deal with large deformation problems. We show analytically and numerically that the minimum number of increment steps in the Newton-Raphson algorithm depends on material properties and applied loads. We also show that this dependence is related to the orientation preservation principle. So we propose a convergence criteria based on the sign of eigenvalues of the deformation gradient matrix.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.84-86
• /
• 2006

An informed watermarking algorithm is proposed in this work that aids in concealing packet loss errors in video communications. This watermark-based error concealment(WEC) method embeds a low resolution version of the video frame inside itself as watermark data. At the receiver, the extracted watermark is used as a reference for error concealment. The proposed DCT-based algorithm has features of informed watermarking in order to minimize the distortion of the host frame. At the encoder, a predictive feedback loop Is employed which helps to adjusts the strength of the scale factor Furthermore, some of the modified coefficients of the DCT signal are virtually free from distortion by employing bit- sign adaptivity. The performance of the detector is Qualitatively analyzed for error concealment applications where full-frame DCT embedding proved to be more advantageous.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.7
• /
• pp.871-880
• /
• 2002

In this paper, I proposed the adaptive watermarking based on the discrete wavelet transform for the very robust watermarking against intentional distortion which attacks on image. A watermark is an binary image such as document(sign), and such watermark image is embedded in the LH and HL band of wavelet transformed domain for copyright protection of image data. To evaluate robustness of the proposed method, we applied some basic algorithm of image processing such as brightening, darkening, sharpening, blurring, cropping, histogram equalizing and lossy compression(JPEG, gif). As a result of experiment, the proposed method has the good image quality and the high perceptibility of watermark. It was demonstrated by experiments that the proposed algorithm can provide an excellent protection under various attacks.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.47-55
• /
• 2003

This paper Presents active control algorithm using probability density function of structural energy. It is assumed that the structural energy under excitation has Rayleigh probability distribution. This assumption is based on the fact that Rayleigh distribution satisfies the condition that the structural energy is always positive and the occurrence probability of minimum energy is zero. The magnitude of control force is determined by the probability that the structural energy exceeds the specified target critical energy, and the sign of control force is determined by Lyapunov controller design method. Proposed control algorithm shows much reduction of peak responses under seismic excitation compared to LQR controller, and it can consider control force limit in the controller design. Also, chattering problem which sometimes occurs in Lyapunov controller can be avoided.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.559-567
• /
• 2020

Vibration at the tip of various flexible manipulators may affect their operation accuracy and work efficiency. To suppress such vibrations, the feasibility of using MFC actuators and sensors is investigated in this paper. Considering the convergence of the famous filtered-x least mean square (FXLMS) algorithm could not be guaranteed while it is employed for vibration suppression of plants with varying secondary path, this paper proposes a new multiple model switching adaptive control algorithm to implement the real time active vibration suppression tests with a new multiple switching strategy. The new switching strategy is based on a cost function with reconstructed error signal and disturbance signal instead of the error signal from the error sensor. And from a robustness perspective, a new variable step-size sign algorithm (VSSA) based FXLMS algorithm is proposed to improve the convergence rate. A cantilever beam with varying tip mass is employed as flexible manipulator model. MFC layers are attached on both sides of it as sensors and actuators. A co-simulation platform was built using ADAMS and MATLAB to test the feasibility of the proposed algorithms. And an experimental platform was constructed to verify the effectiveness of MFC actuators and sensors and the real-time vibration control performance. Simulation and experiment results show that the proposed FXLMS algorithm based multiple model adaptive control approach has good convergence performance under varying load conditions for the flexible cantilever beam, and the proposed FX-VSSA-LMS algorithm based multiple model adaptive control algorithm has the best vibration suppression performance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.66-73
• /
• 2006

Safety is the most important for all traffic management and control technology. This paper focuses on developing a flexible, reliable and real-time processing algorithm which is able to generate signal for the entering vehicle at the joining road through a camera and image processing technique. The images obtained from the camera located beside and upon the road can be used for traffic surveillance, the vehicle's travel speed measurement, predicted arriving time in joining area between main road and joining road. And the proposed algorithm displays the confluence safety signal with red, blue and yellow color sign. The three methods are used to detect the vehicle which is driving in setted detecting area. The first method is the gray scale normalized correlation algorithm, and the second is the edge magnitude ratio changing algorithm, and the third is the average intensity changing algorithm The real-time prototype confluence safety signal generation algorithm is implemented on stored digital image sequences of real traffic state and a program with good experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.876-884
• /
• 2014

A hardware design of LDPC decoder which is based on the improved normalized min-sum(INMS) decoding algorithm is described in this paper. The designed LDPC decoder supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard and 3 block lengths(648, 1296, 1944) and 4 code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. The decoding function unit(DFU) which is a main arithmetic block is implemented using sign-magnitude(SM) arithmetic and INMS decoding algorithm to optimize hardware complexity and decoding performance. The LDPC decoder synthesized using a 0.18-${\mu}m$ CMOS cell library with 100 MHz clock has 284,409 gates and RAM of 62,976 bits, and it is verified by FPGA implementation. The estimated performance depending on code rate and block length is about 82~218 Mbps at 100 MHz@1.8V.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.695-703
• /
• 2011

The number of adders and critical paths in a multiplier block of a multiple constant multiplication based implementation of a finite impulse response (FIR) filter can be minimized through common subexpression elimination (CSE) techniques. A two-bit common subexpression (CS) can be located recursively in a noncanonic sign digit (CSD) representation of the filter coefficients. An efficient algorithm is presented in this paper to improve the elimination of a CS from the multiplier block of an FIR filter so that it can be realized with fewer adders and low logical depth as compared to the existing CSE methods in the literature. Vinod and others claimed the highest reduction in the number of logical operators (LOs) without increasing the logic depth (LD) requirement. Using the design examples given by Vinod and others, we compare the average reduction in LOs and LDs achieved by our algorithm. Our algorithm shows average LO improvements of 30.8%, 5.5%, and 22.5% with a comparative LD requirement over that of Vinod and others for three design examples. Improvement increases as the filter order increases, and for the highest filter order and lowest coefficient width, the LO improvements are 70.3%, 75.3%, and 72.2% for the three design examples.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.20-28
• /
• 2000

The error diffusion algorithm is good for reproducing continuous image to binary image. However the reproduction of edge characteristic is weak in power spectrum analysts of display error. In this paper, an error diffusion method which include pre-filter algorithm for edge characteristic enhancement is proposed Pre-filter algorithm is organized horizontal and vertical directional differential value and weighting function of pre-filter First, it is obtained the horizontal and vertical differential value from the peripheral pixels in original image using $3{\times}3$ Sobel operator Secondly weighting function of pre-filter is composed by function including absolute value and sign of differential value The improved Error diffusion algorithm using pre-filter, present a good result visually which edge characteristic is enhanced. The difference between orignal image and halftoning image is compared with edge-enhanced error diffusion algorithm by measuring the radially averaged power spectrum density.