• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.593-598
• /
• 2014

To solve the labor shortage of skilled workers, the ship building industry needs the automation and mechanization. Especially, compared with other process, handrail manufacturing process of ship building falls behind the automation. In this paper, we designed and implemented a flat-iron automation system using computer convergence technology that can be used in the production of handrails in shipbuilding. The system's machine part was designed by considering the efficiency, productivity, and stability of the cutting process, and checked the stability of the structure using CATIA and ANSYS. The system's control part was used the PCNC controller to provide openness and scalability. And the part was made for system control and monitoring the system through screen manipulation with touch-screen form. A flat-iron automatic system was developed by converging the mechanics, electronics and computer technology and it will contribute to improve the productivity of the industrial system.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.411-422
• /
• 2014

A helideck is a very valuable offshore structure for the take-off and landing of a helicopter. In order to design a helideck, the design parameters and various loads defined by the regulations related to the design of a helideck should be applied. In this study, a risk analysis was performed based on the helicopter accidents for seven years, and the frequency and possible reasons for accidents involving helidecks were investigated. In addition, a finite element analysis of a steel helideck mounted on the upper deck of a ship (shuttle tanker) was performed with the load that should be considered when designing a helideck. Based on the results, a parametric study of helideck was carried out by applying a variety of design parameters, and an improved helideck design was presented. This improved helideck reduced the steel used by up to 24% compared to the initial helideck design, and the results of a finite element analysis were analyzed and compared with those of the initial analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.548-555
• /
• 2014

As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).

• Journal of Environmental Science International
• /
• v.22 no.4
• /
• pp.481-492
• /
• 2013

In this study, the use survey of domestic and international weather information on coastal regions and the demand survey (e.g. general and in-depth surveys) for customer needs with coastal industries were carried out to design customized coastal weather contents. The general demand survey showed that most of the customers working in the coastal industries were interested in a short-term forecast, such as a general weather outlook (approximately 29% of the total respondents) and typhoon information (19%), and they preferred to be given the forecast information from new media such as the internet web-pages (36%) and mobile utilities (23%) rather than old media such as TV (16%) and radio (11%). In addition, only 31% of the total respondents were found to be satisfied with the use of the current coastal weather service. This low percentage might mainly be a result of lack of information accuracy (about 64%) and diversity (28%). From in-depth survey with site visiting, the need of coastal weather contents, such as weather elements, data form, a tool of communication, and forecast interval, differed with the working stages in three coastal industries (e.g. shipbuilding, maritime trade, and passenger transport industries).

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1069-1075
• /
• 2012

Laser is high density heat source, so it can make high speed welding with minimum heat input possible. Especially the high power fiber laser is recently commercialized and has high beam quality and the smallest system size compared with conventional laser due to it's unique oscillating mechanism. Because of these advantages it's thought that the most suitable heat source for LNG cargo tank welding precess which has to be conducted inside of ships. In this study fiber laser was used for welding of stainless steel for LNG carrier to applicate laser welding technique for shipbuilding industry. 1.2mmt STS304L of austenite stainless steel which apply to cargo tank was used for fiber laser welding. Butt and lap welding was conducted changing laser power, welding speed, then penetration characteristic was analyzed and optimal parameters for each materials. Consequently, we found that same or better mechanical properties were obtained in weld compared to base metal.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.21-28
• /
• 2009

Most of domestic shipyards are located at coastal regions which are affected by typhoons nearly every year. For effectiveness of shipbuilding, shipyards contain many facilities which are light-weighted and affected dominantly by wind. In the present paper, we analyze various wind fields over a shipyard including surrounding topology and structures to evaluate the structural safety of the facilities posed in the strong wind. Extreme wind speed for a study region was estimated by typhoon Monte Carlo simulation and then used for inlet wind speed for CFD analysis for wind load on the facilities. Considering geometrical wind effects, we assess the surface pressure of the elements as the pressure factor, the ratio of surface pressure to dynamic pressure. The results show that the simulated wind speed is greater than the design wind speed for the some facilities because of the shipyard's geometry. It also shows that surrounding topography in coastal area is needed to be considered and adjustment for design wind speed at wind load standard application is necessary for mooring ship and industry facilities.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.157-164
• /
• 2011

This work is devoted to the technique application of lock-in infrared Thermography in the shipbuilding and ocean engineering industry. For this purpose, an exploratory study to find the optimized test conditions is carried out by the design of experiments. It has been confirmed to be useful method that the phase contrast images were quantified by a reference image and weighted by defect hole size. Illuminated optical intensity of lower or medium strength give a good result for getting a phase contrast image. In order to get a good phase contrast image, lock-in frequency factors should be high in proportion to the illuminated optical intensity. The integration time of infrared camera should have been inversely proportional to the optical intensity. The other hand, the difference of specimen materials gave a slightly biased results not being discriminative reasoning.

• The Journal of Society for e-Business Studies
• /
• v.16 no.3
• /
• pp.129-143
• /
• 2011

In modern industrial society, the importance of inter enterprise collaboration is more emphasizing for the survival of companies and strengthening its competitiveness. The studies using IT systems effect on inter-enterprise collaboration are already taken several times. However, there is not much systematic research to evaluate the informatization level of B2B collaboration. In this paper, we examined the level of B2B collaboration and the use of IT systems for each business area in small and medium-sized collaborative enterprise which are classified into shipbuilding, automobile, and electronic industry. We verified that the level of collaboration between companies are significant to the level of IT use for each business area by regression analysis. The conclusion of this study is that the level of B2B collaboration and the use of IT systems for each business area are different.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.5 no.4
• /
• pp.51-68
• /
• 2010

The article analyses economic effect of medium size aircraft development project. It is based on the measurement of induced production and increased productivity by the investment on the development project. The analysis shows around 5.2 trillion KRW induced production and 65 billion KRW productivity are expected, if 1.4 trillion KRW is invested as planned. The economic effects with the same size of investment across different manufacturing industries - shipbuilding, auto, general machinery and emiconductor - are also measured for comparison. The result reports ircraft anufacturing is positioned as middle in terms of induced production nd productivity nhancement. he results in this article support the investment, which has economic asibility as well as strategic and military importance as argued.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.294-301
• /
• 2012

Shipbuilding industry has used a lot of $CO_2$ gas as a shielding gas for arc welding and thus, development of welding equipment which can reduce the amount of $CO_2$ gas is requested widely. Therefore, this study is focused on the examination of optimum welding torch distance of Tandem welding system as a fundamental study for the optimum shape design of torch nozzle. $CO_2$ shielding gas distribution and welding bead shape formation by the torch distance are examined. Results show that according to the torch distance variation, most effective shielding gas layer can be formed and quantitative determination of the optimum torch distance can result in the reduction of $CO_2$ shielding gas consumption.