Browse > Article
http://dx.doi.org/10.5916/jkosme.2012.36.8.1069

Characteristics of Fiber Laser Welding on STS304L for GTT MARK III Membrane  

Kim, Jong-Do (한국대학교 기관공학부)
Lee, Chang-Je (STX 조선해양(주) 기술연구소)
Song, Moo-Keun (한국해양대학교 대학원)
Abstract
Laser is high density heat source, so it can make high speed welding with minimum heat input possible. Especially the high power fiber laser is recently commercialized and has high beam quality and the smallest system size compared with conventional laser due to it's unique oscillating mechanism. Because of these advantages it's thought that the most suitable heat source for LNG cargo tank welding precess which has to be conducted inside of ships. In this study fiber laser was used for welding of stainless steel for LNG carrier to applicate laser welding technique for shipbuilding industry. 1.2mmt STS304L of austenite stainless steel which apply to cargo tank was used for fiber laser welding. Butt and lap welding was conducted changing laser power, welding speed, then penetration characteristic was analyzed and optimal parameters for each materials. Consequently, we found that same or better mechanical properties were obtained in weld compared to base metal.
Keywords
Fiber laser welding; LNG cargo tank; Austenite stainless steel; Mechanical property;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 K. S. Kim, S. H. Boo, C. Y. Park, Y. G. Cho and J. S. Lee, "An experimental study on the tensile and fatigue strength of SUS304L lap weld at the cryogenic temperature", Journal of Ocean Engineering and Technology, vol. 22 no. 3, pp. 96-102, 2008.   과학기술학회마을
2 J. H. Kim, Understanding of LNG Ship, Dasom Pub., 2006 (in Korean).
3 J. D. Yoon, "What is LNG", Journal of Korea Petroleum Association, no. 64, pp. 56-62, 1986 (in Korean).   과학기술학회마을
4 D. S. Lee, "A developing tendency of liquefied natural gas carriers", Journal of The Korean Society of Marine Environment & Safety, vol. 15 no. 3, pp. 269-274, 2009 (in Korean).   과학기술학회마을
5 Y. J. Kim, S. D. Yeo and S. I. Kim, "Construction of GAZ transport & techniga membrane(Mark-III) Type LNG ship", Bulletin of The Society of Naval Architects of Korea, vol. 33 no. 6, pp. 42-49, 1996 (in Korean).   과학기술학회마을
6 J. H. Moom, D. R. Yoon, D. C. Kim, D. W. Lee and T. W. Jang, "Influence of lap weld shapes on shear strength by plasma arc welding of SUS 304L", Proceedings of the 2004 Spring Annual Meeting of The Korean Welding and Joining Society, pp. 129-130, 2004 (in Korean).   과학기술학회마을
7 E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero, L. E. Murr, W. W. Fisher and A. H. Advani, "Combined effects of deformation (strain and strain state), grain size, and carbon content on carbide precipitation and corrosion sensitization in 304 stainless steel", Materials Characterization, vol. 35, no. 2, pp. 99-112, 1995.   DOI   ScienceOn
8 H. S. Kwon, H. S. Kim, C. J. Park and H. J. Jang, Understanding of Stainless Steel, Korea Metal Journal, 2007 (in Korean).
9 L. Quintino, A. Costa, R. Miranda, D. Yapp, V. Kumar and C. J. Kong, "Welding with High Power Fiber Lasers - A Preliminary Study", Materials and Design, vol. 28, pp. 1231-1237, 2007.   DOI   ScienceOn
10 M. Y. Lee, "A multi killowatts CW fiber laser welding", Journal of Korean Welding and Joining Society, vol. 26, no. 4, pp. 318-323, 2008 (in Korean).   과학기술학회마을   DOI   ScienceOn