Browse > Article
http://dx.doi.org/10.3744/SNAK.2014.51.6.548

[Retracted] The Effect of Welding Conditions on Tensile Characteristics and Thermal Stress of Al 5083 Alloy Applied to Co-environmental Leisure Ships  

Moon, Byung Young (Department of Naval Architecture, Kunsan National University)
Lee, Ki Yeol (Shipbuilding & Ocean Technical Manpower Agency, Kunsan National University)
Kim, Kyu Sun (Sam Won Heavy Industry, Limited)
Publication Information
Journal of the Society of Naval Architects of Korea / v.51, no.6, 2014 , pp. 548-555 More about this Journal
Abstract
As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).
Keywords
Welding conditions; GMAW; Tensile characteristics; Thermal deformation; Welding Procedure Specification(WPS); Heat Affected Zone(HAZ); Al leisure ship;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Davies, G.J., 1973. Solidification and Casting. Wiley: New York.
2 Kou, S., 2003. Welding Metallurgy. John Willey & Sons, Inc.: New York.
3 Flemings, M.C., 1974. Solidification Processing. McGraw-Hill: New York.
4 Gurney, T., 2006. Cumulative Damage of Welded Joints. Woodhead Publishing Limited: Oxford.
5 Gurney, T.R., 1968. Fatigue of Welded Structures. Cambridge University Press: Cambridge.
6 Kweon, H.J. & Lim, J.H., 2003. General Welding Engineering. Seon Hak Press: Incheon.
7 Masubuchi, K., 1980. Analyasis of Welded Structures, Pergamon. Elmsford: New York.
8 Monodolfo, L.F., 1976. Aluminium Alloy : Structure and Properties. Butterworths: London.
9 Nutting, J. & Baker, R.G., 1965. The Microstructure of Metals. Institute of Metals: London.
10 Park, H.K., 2007. A study on the Mechanical characteristics for fillet Joints of Al 5083 alloy by using Hybrid welding. M.S. Dissertation. Chosun University.
11 Society of the Fusion Welding of Light Metals, 1971. Inert Gas Welding of Aluminium Alloys. Japan Light Welding Association. Tokyo.
12 Smith, W.F., 1981. Structure and Properties of Engineering Alloys. McGraw-Hill: New York.