• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.164-173
• /
• 2012

Landing ship tank with well dock has the important mission transferring troops or landing equipments from sea to shore. Such transfers are usually carried out using landing crafts, which are loaded or unloaded in flooded well dock. In this situation, as relative motions are occur between well dock and landing craft, safety verifications are demanded. In this paper, seakeeping and safety performances are investigated through model test. First of all, well dock dimensions are reviewed and model tests are performed with sea state 3&4 in 180degree wave direction. Model tests are conducted for three relative positions and seakeeping performances are investigated each position.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.183-184
• /
• 2004

High capacity container carrier has been considered for many decades to transport the more containers at the same time. Therefore, it is required for high capacity container ship to be applied thicker plate to accomodate a number of containers compared to that of general container ship. To maintain the same productivity of this thicker plate, new welding process should be considered. One of the process for vertical-up position is 2 electrodes EGW(Electro Gas Welding). 2 ectrodes EGW was applied and evaluated whether it can be applicable or not. The heat input used for 72mm thick plate was 520k11cm. from the mechanical test, it is considered that this process can be applicable, showing satisfaction of mechanical properties such as tensile strength, elongation and impact property.

• 기술사
• /
• 제16권2호
• /
• pp.1-11
• /
• 1983

The resistance property of a high speed passenger craft (: "DOL-PIN HO" designed by the author in 1972) is investigated as follows; -. The Resistance property of the craft is determined by savitsky′s method and blount-Fox′s method. The theoretical results are also compared with the full scale data. The comparison reveals that the result when using blount/fox′s method are in much closer agreement with the full scale data than savitsky′s. -. The effects of ship speed on the positions of the center of pressure and of the longitudinal center of gravity (L.C.G.) are investigated. The investigation shows that the position of L.C.G. of the craft is almost constant although the ship speed is changed. -. The effect of transom flap on the Resistance property of the craft is studied using savitsky/brown′s method. From the study it is found that the resistance of the craft is decreased and hence speed gain (about 3% of the service speed) can be obtained, when using transom flap for the craft.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.150-153
• /
• 1995

In this paper the attitude control system is developed for longitudinal motion of Foil-Catamaran in regular waves with all-movable foils which attached to fore and after part of the ship and verified the system by theoretical calculation and model-tests. The linearized equations of motion of the ship is employed to apply the linear control theories, the PID control and the LQR. The strip method was used to calculate hydrodynamic coefficients and wave exciting forces of the demi hull, and unsteady hydrodynamic forces of foils are considered by using the result of Wu(1972). About 40-60% of motions is reduced in experiments. The control system described in this paper is able to extended to 6-DOF motions or control in irregular wave with trivial modification. And it is applicable to hull shape development for better seakeeping performance and to determine the size and the position of hydrofoils for the attitude control.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.512-517
• /
• 2008

The brake system is very important part of the machine working. If the machine can't be stopped, it would be serious accident. It is the same as the ship. The mooring winch brake hold the ship in harbor. But sometimes it appeared the excessive stress and brake lining would be broken. So it is necessary to change the shape of brake system with improve the braking power. This study carried out research on optimum design like as moved the position of link pin or modified the thickness of brake band and lining.

• 대한조선학회논문집
• /
• 제41권5호
• /
• pp.63-69
• /
• 2004

This study contains the CFD analysis to predict the flow in engine room and utilize the results as a reference for arranging smoke detectors. FLUENT, a commercial CFD code is adopted because of its good application experience in DSME(Daewoo Shipbuilding & Marine Engineering Co.. Ltd.). The target is the engine room of VLCC. which was delivered in 2002. The model for analysis includes main structure elements, ventilation ducts, main engine and other big size equipment. From the analysis results, the internal flow pattern can be observed and some guidelines for the position of smoke detectors cane be presented.

• 한국가시화정보학회지
• /
• 제5권2호
• /
• pp.26-32
• /
• 2007

Stereoscopic PTV and Stereoscopic-PIV measurements have been carried out for the studies of the wake of a ship's propeller. Stereoscopic photogrammetry based on a 3D-PTV principle was introduced using two high-definition cameras(1k x 1k, 30Hz). The arrangement of the two cameras was based on angular position. The pair-matching of the three-dimensional velocity vectors were based on Genetic Algorithm based 3D-PTV technique. The results obtained by both measurement systems have been compared at the advance ratio J=0.88(290 rpm, d=54 mm). Turbulent properties have also been compared each other at the same condition.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.217-225
• /
• 2016

Dynamic Positioning (DP) is used to automatically maintain the position and heading of a floating structure subjected to environmental disturbances. A DP control system is composed of a motion controller to compute the desired force and moment and a thrust allocator to distribute the computed force and moment to multiple thrusters considering mechanical and operational constraints. Among various thruster configurations, azimuth thrusters or propeller/rudder pairs tend to make the allocation problem difficult to solve, because these types of propulsion systems include nonlinear constraints. In this paper, a dynamic positioning strategy for a twin-thruster ship that is propelled by two azimuthing thrusters is addressed, and a thrust allocation method which does not require a numerical optimization solver is proposed. The applicability of the proposed method is demonstrated with an experiment using an autonomous boat.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.47-48
• /
• 2018

본 논문에서는 선박의 위치, 침로, 속력, 해도 정보, 수심 등의 수로 정보를 표시하는 장치인 전자해도 표시정보시스템의 기능을 활용하여 기존 선박 항해 중심의 전자해도 표시정보시스템과 달리 등부표와 같은 해양교통시설의 정보 수집, 설치, 운용 그리고 유지보수 중심 전자해도 뷰어시스템을 구현한다.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.850-855
• /
• 2006

This is concerned with the development and design of automatic maneuvering system using Differential Global Positioning System(DGPS). To achievement of autonomous maneuvering controller for giant ship, first, we investigated automatic maneuvering controller using DGPS in motor car. The sensors are configured with DGPS and digital compass. We calculated velocity and steering angle of motor car based on sensor signal. To design the controller, we derived the bicycle model and developed critically damped controller. The critically damped controller can be tracing previously appointed position in the fastest time. We are used a laptop computer to realize and the control algorithm is programmed by visual basic software. The obtained experimental results from developed system show unmanned motor car is good tracing planed positions. Hence, the system is looking forward to use the autonomous maneuvering control fur giant ship.