• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.540-548
• /
• 2002

The purpose of this study is to analyze the application of oyster shells (OS) as aggregates for concrete. For this purpose, five reference mixes with W/C ratios of 0.4 ∼0.6 at intervals of 0.05 were used. The replacement proportion of OS was varied with ratios of 0, 10, 30, 50 and 100％ by volume of fine or coarse aggregate in the reference mixes. OS was washed and crushed for using as aggregates. New chemical reaction between crushed OS aggregate and cement paste was tested through XRD and SEM analysis. Two strength properties (compressive and flexural) were considered. Strength tests were carried out at the ages of 1, 3, 7, 14 and 28 days. The variations of workability, air content and density, drying shrinkage of the specimens with different proportions of OS were also studied. Finally, the hollow concrete block using OS as a substitute material for fine aggregate was made for testing the application of OS. Experimental results showed that my new chemical reaction did not occur due to mixing OS in concrete. The workability and strengths decreased with increase in proportion of OS. The same trend was observed in density and unit weight, but air content increased due to the inherent pores in OS, which showed a possibility to produce light weight concrete with low strength by using OS as coarse aggregates for concrete. Tests on hollow concrete block showed that the compressive strength and absorption ratio were satisfied with quality requirements when the fine aggregate was substituted with OS up to 50％ in volume.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.97-104
• /
• 2007

Recently, the demand of the large span structures has been increasing. The large span structures include such a large scaled structures such as: the shell structure, the space frame structure, the membrane structure and the cable structure, etc. The large span structures are supposed to be confirmed and issued carefully at the initial process of the design besides the construction engineering aspects because of the structural specific cause that should solve and accomodate those large and wide space without columns. In the field of the large span structure construction, the erection construction method has been regarded as a major affected aspects on the construction cost, construction term, and stability. In the field of the large span structure construction, there are various construction method and system could be applied depends on the condition of the construction site and other circumstances such a major construction method as: the element method, the block method, the sliding method, the lift-up method and complexed method, etc. In this study, as the case study of the erection construction method of the large span structures, after survey and study that those existing large span structures construction cases which had applied and adopted the election construction method and analysis and classify into the Uoups by the size, span, ceiling height, structural system in odor to supply and suggest the data for the enhancement and development in the field of the erection construction method as a efficient structural solution of the large span structure construction.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.3
• /
• pp.125-133
• /
• 2017

Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.2
• /
• pp.136-144
• /
• 2003

This study was conducted to investigate the effect of 0.5% calcium lactate(CaL) on the fermentation of dough and quality and shelf-life of bread. Calcium lactates(CaL-A and CaL-P) were prepared from ash of black snail which contained shell and tissue together(ABS) and powder of the snail(PSB). pH of dough with the CaLs were higher than that of the control md, volume of the dough, loaf volume of bread were lower than those of the control products. But the volumes were almost the same when the pH of the dough were adjusted to pH 5.5. Mean calcium contents of treated bread (39.36~49.70 mg/100 g) were higher than that of control products(13.43 mg/100 g). There was no difference in Hunter $L^{*}$, $a^{*}$, $b^{*}$ values between the control and the treated group. Hardness and gumminess of CaL-A treated bread were the highest, but springiness and cohesiveness were the lowest. All the attributes showed no difference in case of pH adjustment(pH 5.5). The smaller pore and larger air cell with rough surface were observed in the CaL treated bread by SEM analysis. Sensory scores of CaL treated bread showed relatively lower values than those of the control products, but the scores increased by pH adjustment. The shelf-life of bread with CaL-P and CaL-A at 2$0^{\circ}C$ were 4 and 3 days, respectively, while that of the control group 1 day.day.y.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.308-312
• /
• 2013

Active carbons with high specific surface area and micro pore structure were prepared from the coconut shell char using the chemical activation method of NaOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to char ratio and the flow rate of gas during carbonization. The active carbons with the surface area (2,481 $m^2/g$) and mean pore size (2.32 nm) were obtained by chemical activation with NaOH. The electrochemical performances of hybrid capacitor were investigated using $LiMn_2O_4$, $LiCoO_2$ as the positive electrode and prepared active carbon as the negative electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes ($LiPF_6$, $TEABF_4$) were characterized by constant current charge/discharge, cyclic voltammetry, cycle and leakage tests. The hybrid capacitor using $LiMn_2O_4$/AC electrodes had better capacitance than other hybrid systems and was able to deliver a specific energy as high as 131 Wh/kg at a specific power of 1,448 W/kg.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.318-327
• /
• 2007

This study presents the molecular phylogenetic analysis of Korean Aurelia aurita Linnaeus collected from Yeosu in the southern waters of Korea using nuclear ITS1 region and mitochondrial COI gene sequences. The use of oligonucleotide primers F5 (forward) and R5 (reverse) targeted to ITS1 and LCO1490 (forward) and HCO2198 (reverse) targeted to COI amplified 267 bp and 643 bp fragments, respectively. The shortest genetic distance towards the ITS1 region is estimated at 0.023 when comparing Korean A. aurita to Aurelia sp. collected from California, USA. In particular, Korean and American/Swedish A. aurita were located far away in terms of genetic distance, ranging from 0.393 to 0.395. On the other hand, the genetic distance between Korean and English/Turkish/Swedish/American A. aurita regarding the mitochondrial DNA COI gene ranged from 0.201 to 0.205. However, a sister-ship with Korean and American A. aurita showed an extremely high bootstrap value (100%). The predicted secondary RNA structure of the mitochondrial DNA COI gene showed many different folding structures with a similar energy between Korean and American A. aurita. These results suggest that ITS1 and the mitochondrial DNA COI gene could be used as genetic markers for identification of the biogeographic populations.

• The Korean Journal of Malacology
• /
• v.25 no.3
• /
• pp.223-230
• /
• 2009

Metallothioneins (MTs) play a key role in metallic homeostasis and detoxification in most living organisms. In an attempt to study the biological functions and significance of MT in a snail, we cloned and partially characterized the MT gene from the left-handed snail, Physa acutawhich has been regarded as a potential biomonitering species for fresh water. The complete cDNA sequence of PaMT cDNA was identified from the expressed sequence tag (EST) sequencing project of Physa acuta. The coding region of 180 bp gives 60 amino acid residues including the initiation methionine and termination codon. Clustering and phylogenic analysis of PaMT with other MT amino acid sequences show that it has some identities to Helix pomatia (60%), Arianta arbustorum (58%), Perna viridis (49%), Mytilus edulis (49%), Bathymodiolus azoricus (49%), Bathymodiolus azoricus (48%) and Bathymodiolus sp. FD-2002 (48%). Time dependent induction for PaMT from P. acuta exposed with cadmium (50 ppb) indicated that PaMT was induced at 4-8 hr after exposure. It remains to further develop PaMTas a potential biomarker for water contamination in fresh water.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.4
• /
• pp.344-348
• /
• 2019

This study assessed the microbiological hazards of gloves worn during the shell shucking process of the oyster Crassostrea gigas, and we suggest an in situ method for minimizing microbial contamination. The study consisted of two groups, one in which the working gloves were periodically replaced (PRG) with new gloves, and another in which the gloves were not replaced (NRG). In the PRG group, gloves were replaced every 2 h during 8 h of processing. Food pathogenic bacteria Escherichia coli, Salmonella species, and Listeria monocytogenes were not found in any samples, including gloves and shucked oysters. However, Staphylococcus aureus (SA) was detected in some samples, and the contamination levels were correlated with the working time and the regular replacement of gloves. SA was not detected on gloves or oysters of the PRG group. However, it was detected in the range of <$15CFU/15cm^2$ to $2.9{\times}10^2CFU/15cm^2$ on gloves after 6 h of continuous work, and from <$15CFU/15cm^2$ to $2.23{\times}10^2CFU/15cm^2$ on oysters after 8 h. These results indicate that the SA contamination in shucked oysters originated from the working gloves, and that replacement of working gloves every 2-4 h will minimize SA contamination in oyster products.

• Korean Journal of Poultry Science
• /
• v.46 no.2
• /
• pp.87-94
• /
• 2019

Huge amount of persimmon peels, which are byproducts usually arising after making dried persimmons from fresh persimmons, are generated in fall, every year. As the dry matter of persimmon peel contains carbohydrates over 80%, it could be a good candidate for feed. In this study, we evaluated the persimmon peel as a feed resource for a hen laying eggs. Persimmon peel has lower ratio of crude protein and fat composition while higher ratio of crude fiber composition compared to a basal laying hen feed. Feeding the persimmon peel by adding to the feed at the level of 2% or 5% did not affect the egg-laying rate from beginning to the peak of laying. In addition, feeding the persimmon peel did not affect the egg quality either, as the pH, Haugh unit, yolk color and shell thickness of the egg were not different from each other. The composition of amino acids and fatty acids were also almost same for each other, except for the linolenic acid which was slightly higher in the persimmon peel feeding groups. In conclusion, addition of persimmon peel to the feed up to 5% might be helpful to increase the income and reduce the waste produced from the agricultural byproduct.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2021

POGO is a dynamic axial instability phenomenon that occurs in liquid-propelled rockets. As the natural frequencies of the fuselage and those of the propellant supply system become closer, the entire system will become unstable. To predict POGO, the propellant (oxidant and fuel) tank in the first stage is modeled as a shell element, and the remaining components, the engine and the upper part, are modeled as mass-spring, and structural analysis is performed. The transmission line model is used to predict the pressure and flow perturbation of the propellant supply system. In this paper, the closed-loop transfer function is constructed by integrating the fuselage structure and fluid modeling as described above. The pogo suppressor consists of a branch pipe and an accumulator that absorbs pressure fluctuations in a passive manner and is located in the middle of the propellant supply system. The design parameters for its design optimization to suppress the decay phenomenon are set as the diameter, length of the branch pipe, and accumulator. Multiple-objective function optimization is performed by setting the energy minimization of the closed loop transfer function in terms of to the mass of the pogo suppressor and that of the propellant as the objective function.