• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.161-170
• /
• 2006

Bender elements, composed of thin piezo-ceramics and elastic shims, have been used to measure shear wave velocities of specimens in laboratories. In a preliminary stage of their field applications, an in-house research of optimizing suitable bender elements and geometrical arrangement has been carried out in a barrel of kaolinite-water mixture. Two types of measurement configuration, similar to cross-hole and in-hole seismic testing, has been implemented. A pair of prototype instrumented rods was penetrated into a soft clay layer in the west coast and excellent shear waves were recorded. Development of penetration device(mandrel) and associated instrumented rods are in progress for deeper investigation.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.746-754
• /
• 1987

본 연구에서는 X형 프로우브에 Mojolla의 방법을 적용하였으며, 경사프로우브 에는 프로우브의 경사각도와 회전각도에 따른 속도성분과 출력전압과의 관계를 유도하 여 적용하였으며, 이들 방법에 의한 3차원 유동계측의 정확성과 적용법위를 조사하였 다.

• 토지주택연구
• /
• 제3권4호
• /
• pp.389-397
• /
• 2012

In this study, crosshole seismic test, donwhole seismic test, SPT uphole test, and suspension PS logging (SPS logging) were conducted and the shear wave velocities of these tests were compared. The test demonstrated the following result: Downhole tests showed similar results compared to those of crosshole tests, which is known to be relatively accurate. SPS logging showed reliable results in the case of no casing, i.e. in the rock mass, while, in the case of soil ground, its values were lower or higher than those of other tests. SPT-uphole tests showed similar results in the soil ground and upper area of rock mass compared to other methods. However, reliable results could not be obtained from these tests because SPT sampler could not penetrate into the rock mass for the tests.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.606-611
• /
• 2009

MiStrut is a new method to establish structural stability in designing braced excavations by making a rigid connection between top-level steel beams and soldier beams. MiStrut has a function of working as a strut as well as supporting cover plates of top-level steel beams. The structural mechanism of MiStrut is supposed to reduce flexural deformation of soldier beams, which may lead to reduced lateral earth pressures behind excavation. In this research, for verification of the performance of MiStrut, shear-wave velocities of subsurface soil before and after excavation was compared. The rigid connection of main girder beams with soldir beams reduced shear-wave velocity by 67% and lateral earth pressures by 90%, which indicates that MiStrut is effective development in reducing lateral earth pressures on braced excavation.

• 한국분무공학회지
• /
• 제4권4호
• /
• pp.38-45
• /
• 1999

The near field structure of round turbulent jets with initially asymmetric velocity distribution is investigated experimentally. Experiments were carried out using a constant temperature hot-wire anemometry system to measure streamwise velocity in the jets. The measurements were undertaken across the jet at various streamwise stations in a range starting from the jet exit plane and up to a downstream location of twelve diameters. The experimental results include the distribution of mean and instantaneous velocities, vorticity field, turbulence intensity, and the Reynolds shear stress. The asymmetry of the jet exit plane was obtained by using circular cross-section pipes with a bend at the upstream of the exit. Three pipes were used for this study: A straight pipe, 90 and 160 degree-bended pipes. Therefore, at the upstream of the pipe exit, the secondary flow through the bend and the mean streamwise velocity distribution could be controlled by changing the curvature of pipes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1365-1371
• /
• 2009

A new s-wave probe, called "MudFork", has been recently developed and is used in accurate measurements of shear wave velocities of soft soils. In previous researches, some instrumental defects of the probe have been reported. Bending deformation of probe is caused by small section modulus of blades, and open-ended bender elements are vulnerable to damage during penetration. Herein, we improved the MudFork to solve these problems. Field tests at Sinan, Jeollanamdo using the improved MudFork were conducted. Results from MPT are compared with the results from CPT.

• Earthquakes and Structures
• /
• 제13권1호
• /
• pp.17-27
• /
• 2017

In this study, the characteristics of site amplification at seismic observation stations in Japan were estimated using the attenuation relationship of each station's response spectrum. Ground motion records observed after 32 earthquakes were employed to construct the attenuation relationship. The station correction factor at each KiK-net station was compared to the transfer functions between the base rock and the surface. For each station, the plot of the station correction factor versus the period was similar in shape to the graphs of the transfer function (amplitude ratio versus period). Therefore, the station correction factors are effective for evaluating site amplifications considering the period of ground shaking. In addition, the station correction factors were evaluated with respect to the average shear wave velocities using a geographic information system (GIS) dataset. Lastly, the site amplifications for specific periods were estimated throughout Japan.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.256-265
• /
• 2023

Many numerical methods have been developed since 1961, but unresolved issues remain. This study developed a numerical method to address these issues and determine the coefficients and properties of rotational waves with a shear current in a finite water depth. The number of unknown constants was reduced significantly by introducing a wavelength-independent coordinate system. The reference depth was calculated independently using the shooting method. Therefore, there was no need for partial derivatives with respect to the wavelength and the reference depth, which simplified the numerical formulation. This method had less than half of the unknown constants of the other method because Newton's method only determines the coefficients. The breaking limit was calculated for verification, and the result agreed with the Miche formula. The water particle velocities were calculated, and the results were consistent with the experimental data. Dispersion relations were calculated, and the results are consistent with other numerical findings. The convergence of this method was examined. Although the required series order was reduced significantly, the total error was smaller, with a faster convergence speed.

• 한국지반환경공학회 논문집
• /
• 제9권7호
• /
• pp.53-60
• /
• 2008

본 연구의 목적은 MASW를 이용하여 산정한 사력댐 코어죤의 전단파속도 산정결과를 사례 분석하고, 그 결과를 기존 경험적 제안식과 비교하여 차이점을 파악하는데 있다. 또한, MASW 결과로부터 산정될 수 있는 코어죤의 깊이별 전단파속도 분포 범위를 제시하여 동적해석에 필요한 코어죤의 최대전단탄성계수 산정을 위한 기초자료를 제공하는데 있다. 사례분석 및 기존제안식과의 비교 결과, 댐 동적해석을 위해 MASW를 이용하여 코어죤의 전단파속도를 산정하는 경우, 심도 10m 이상에서는 거의 Sawada와 Takahashi의 제안식에 비해 작은 값을 산정하게 됨을 확인하였고, 현장여건에 의하거나 예비해석단계에서 MASW에 의한 탐사가 불가한 경우에는 Sawada와 Takahashi의 제안식 중 하한값에 대한 제안식을 사용하는 것이 보다 합리적임을 제안한다.

• 해양환경안전학회지
• /
• 제12권1호
• /
• pp.9-14
• /
• 2006

유기도막의 방식성능은 도막의 수지성분과 안료의 화학적 특성에 의존한다 전자는 부식인자의 침투를 차단 및 지연시키는 역할을 하며, 후자는 침투된 부식인자들에 의해 일어나는 부식반응을 억제하는 기능을 갖고 있다. 또한 도막 자체의 영향 외에, 외부 환경에 의해서 다르게 나타난다. 본 연구에서는 교류 임피던스 법을 이용하여 유속과 그에 따른 유동 전단응력에 의한 도막의 열화거동을 조사하였다. 실험기 사용된 도막의 두께는 $70{\mu}m$에서 $140{\mu}m$까지 변화시켰다. 두꺼운 도막($140{\mu}m$) 에서는 유속이 증가함에 따라 물 흡수량의 감소와 높은 임피던스 특성을 나타내었다. 그러나 얇은 도막($90{\mu}m$) 에서는 유속이 증가함에 따라 도막의 파괴가 진행되고 있음을 확인할 수 있었다. 도막에 가해지는 전단응력이 증가할수록, 즉 선박의 운항속도가 증대될수록 도막의 열화에 의하여 방식성능이 떨어짐을 확인할 수 있었다.