• Journal of Microbiology and Biotechnology
• /
• 제22권11호
• /
• pp.1494-1500
• /
• 2012

Fermentation with filamentous fungi in a bioreactor is a complex dynamic process that is affected by flow conditions and the evolution of the rheological properties of the medium. These properties are mainly affected by the biomass concentration and the morphology of the fungus. In this work, the rheological properties of a fermentation with the fungus Beauveria bassiana under different hydrodynamic conditions were studied and the rheological behavior of this broth was simulated through a mixture of carboxymethyl cellulose sodium and cellulose fibers (CMCNa-SF). The bioreactor was a 10 L CSTR tank operated at different stir velocities. Rheological results were similar at 100 and 300 rpm for both systems. However, there was a significant increase in the viscosity accompanied by a change in the consistence index, calculated according to the power law model, for both systems at 800 rpm. The systems exhibited shear-thinning behavior at all stir velocities, which was determined with the power law model. The mixing time was observed to increase as the cellulose content in the system increased and, consequently, the efficiency of mixing diminished. These results are thought to be due to the rheological and morphological similarities of the two fungal systems. These results will help in the optimization of scale-up production of these fungi.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.757-762
• /
• 2002

Many reports have been shown that the buoyancy, electromagnetic force, surface tension, and gas shear stress are the driving forces of weld pool circulation in arc welding. Among them, the surface tension of molten metal plays an important role in the flow in weld pool, which are clarified by the specially designed experiments with small particles as well as the numerical simulations. The surface tension is also related to the penetration in arc welding. Therefore, a quantitative evaluation of surface tension is demanded for the development of materials and arc process control. However, there are few available data published on the surface tension of molten metals, since it depends on the temperature and the composition of materials. In this study, a new method was proposed for the evaluation of surface tension and its temperature dependence, in which it is evaluated by the equilibrium condition of acting forces under a given surface geometry, especially back surface. When this method was applied to the water pool and to the back surface of molten pool in the stationary gas tungsten arc welding of thin plate, following results were obtained. In the evaluation of surface tension of water, it was shown that the back surface geometry was very sensitive to the evaluation of surface tension and the evaluated value coincided with the surface tension of water. In the measurement of molten pool in the stationary gas tungsten arc welding, it was also shown that the comparison between the surface tension and temperature distribution across the back surface gave the temperature dependent surface tension. Applying this method to the mild steel and stainless steel plates, the surface tension with negative gradient for temperature is obtained. The evaluated values are well matched with ones in the published papers.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.377-381
• /
• 2006

본 논문에서는 노즐출구 단면에 설치된 메쉬 스크린을 이용하여 초음속 제트 소음 제어하기 위한 실험을 수행하였다. 메쉬 스크린은 미소 직경을 가진 스테인레스 철사들로 만들어졌으며 철망 형태이다. 노즐 압력비는 과팽창에서 부족팽창된 초음속 제트를 얻기 위해 다양하게 변화시켰다. 초기 제트 전단층을 교란하기 위해, 메쉬 스크린의 중앙 부분에 구멍을 만들었으며 그 구멍크기는 메쉬 스크린의 소음 저감효과를 조사하기 위해 변화시켰다. 유동장을 가시화하기 위해 쉴리렌 광학 장치를 사용하였고 OASPL과 소음 스펙트럼을 얻기 위해 음향을 측정하였다. 본 실험으로부터 얻어진 결과는 메쉬 스크린이 스크리치 톤을 상당히 억제하였으며, 메쉬 스크린의 구멍크기는 초음속 제트 소음을 저감하는 중요한 인자였다. 과팽창된 제트인 경우, 소음 저감효과는 적정팽창과 부족팽창된 제트에서의 저감효과보다 매우 크게 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.627-630
• /
• 2009

이젝터 시스템은 주유동 제트에 발생되는 전단 응력과 압력차에 의해 흡입 챔버 압력에 영향을 미치거나 이차 흡입 유동을 유도한다. 이젝터는 터빈 기반 복합사이클 추진기관 및 로켓엔진의 고고도 모사 설비, 압력회복장치, 담수화 시스템, 이젝터 램젯시스템과 같이 많은 분야에 적용되어 널리 사용된다. 본 연구에서는 아음속 및 음속 조건에서 작동하는 이젝터의 형상 및 운전 조건을 결정하는 설계 절차를 수립하고자 하였다. 또한, 이론적 방법과 시험적 연구를 통해 축소 확대 디퓨저가 장착된 이젝터의 작동 특성을 파악하였다. 결국, 수치해석을 통해 요구 성능을 만족하는 이젝터의 최적 형상을 결정하였으며 다양한 노즐 목 및 챔버 직경을 변화시킨 이젝터에 대한 성능 시험을 통해 계산 결과를 검증하였다.

• Preventive Nutrition and Food Science
• /
• 제18권1호
• /
• pp.45-49
• /
• 2013

This study was carried out to determine a possibility of adding Corni fructus extract (CFE) into yogurt for improving the neutraceutical properties of yogurt and the effects of adding CFE (2~6%, v/v) on the physicochemical and sensory properties of the products during a 15-day storage period at $4^{\circ}C$. Incorporation of CFE into the yogurt samples resulted in a significant pH reduction and a significant increase in titratable acidity. When evaluating the color of the yogurt, the $L^*$-values were not significantly influenced by CFE supplementation; however, the $a^*$- and $b^*$-values significantly increased with the addition of CFE during storage. The power law and Casson models were applied to assess the flow behavior of CFE-added yogurt samples. The magnitudes of apparent viscosity (${\eta}_{a,100}$), consistency index (K), and yield stress (${\sigma}_{oc}$) for 4~6% CFE yogurt samples were significantly greater than those for the control, indicating that CFE can be used as a thickening agent for yogurt. The sensory test revealed that addition of CFE (2~4%) to yogurt did not significantly affect the overall scores, but the overall preference score for 6% CFE yogurt was significantly decreased. Based on the data obtained from the present study, we concluded that the concentrations (2~4%) of CFE could be used to produce a CFE-added yogurt without the significantly adverse effects on the physicochemical and sensory properties.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권5호
• /
• pp.405-413
• /
• 2004

The rheological properties of an exopolysaccharide, EPS-R, produced by the marine bacterium Hahella chejuensis strain 96CJ 10356 were investigated. The $E_{24}$ of $0.5\%$ EPS-R was $89.2\%$, which was higher than that observed in commercial polysaccharides such as xanthan gum ($67.8\%$), gellan gum ($2.01\%$) or sodium alginate ($1.02\%$). Glucose and galactose are the main Sugars in EPS-R, with a molar ratio of ${\~}1:6.8$, xylose and ribose are minor sugar components. The average molecular mass, as determined by gel filtration chromatography, was $2.2{\times}10^3$ KDa, The intrinsic viscosities of EPS-R were calculated to be 16.5 and 15.9 dL/g using the Huggins and Kraemer equations, respectively, with a 2.3 dL/g overlap. In terms of rigidity, the conformation of EPS-R was similar to that of caboxymethyl cellulose ($5.0{\times}10^{-2}$). The rheological behavior of EPS-R dispersion indicated that the formation of a structure intermediate between that of a random-coil polysaccharide and a weak gel. The aqueous dispersion of EPS-R at concentrations ranging from 0.25 to $1.0\%$ (w/w) showed a marked shear-thinning property in accordance with Power-law behavior. In aqueous dispersions of $1.0\%$ EPS-R, the consistency index (K) and flow behavior index (n) were 1,410 and 0.73, respectively. EPS-R was Stable to pH and salts.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.414-423
• /
• 2006

Many construction projects adopt grouting technology to prevent the leakage of groundwater or to improve the shear strength of the ground. Recognition as a feasible field procedure dates back to 1925, Since then, developments and field use have increased rapidly. According to improvement of grout materials, theoretical study on grout penetration characteristics is demanded. Fluid of grout always tends to flow from higher hydraulic potential to lower and the motion of grout is also a function of formation permeability. Viscosity of grout is changed by chemical action while grout moves through pores. Due to the increment of viscosity, permeability is decreased. Permeability is also reduced by grout particle deposits to the soil aggregates. In this thesis, characteristics of new cement grout material that is developed recently is studied: injectable volume of new grout material is tested in two different sizes of sands, and the method to calculate injectable volume of grout is suggested with consideration of change in viscosity and clogging phenomena. The calculated values are compared with injection test results. Viscosity of new grout material is found to be an exponential function of time. And lumped parameter $\theta$ of new grout material to be used for assessing deposition characteristics is estimated by comparing deposit theory with injection test results considering different soil types and different injection pressure.

• 콘크리트학회논문집
• /
• 제14권2호
• /
• pp.239-248
• /
• 2002

철근 콘크리트 면부재의 주기거동을 나타내기 위하여 소성모델과 손상모델의 통합구성모델을 개발하였다. 인장-압축을 받는 콘크리트의 응력은 개념적으로 콘크리트의 스트럿 작용에 의한 압축응력과 인장균열에 의한 인장응력의 합으로 정의하였다. 인장균열의 비등방손상에 의하여 영향을 받는 압축파괴의 등방손상을 나타내기 위하여 다중파괴기준을 갖는 소성모델을 사용하였으며, 다중균열 방향에서 인장응력-변형률 관계를 나타내기 위하여 다중고정균열손상모델과 인장균열의 소성유동모델의 개념을 사용하였다. 이러한 통합모델은 주기 인장-압축 상태의 철근 콘크리트의 거동측성, 즉 다중 인장균열 방향, 점진적으로 회전하는 균열 손상, 콘크리트의 압축파괴를 나타낼 수 있다. 제안된 구성모델은 유한요소해석에 적용되었으며, 주기하중을 받는 철근 콘크리트 전단패널 및 전단벽에 대한 기존의 실험결과들과의 비교를 통해 검증되었다.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1145-1158
• /
• 1994

물의 유동(流動)에 관한 계산상 효율성(效率性)을 갖는 자유수면(自由水面)을 고려한 3차원(次元) 유한차분(有限差分) 수직모형(數値模型)을 개발하였다. 수직모형(數値模型)은 연직방향(鉛直方向)에 대해 정규화(正規化)한 좌표(座標)(${\sigma}$-coordinate)를 사용하며, 시간(時間) 적분방법(積分方法)으로는 반음해법(半陰解法)(semi-implicit)을 사용하여 계산시간(計算時間)의 효율성(效率性)을 도모하였다. 모드분리(mode-splitting)개념을 도입하여 내부모드(internal mode)에 대해서는 양해법(陽解法)을 사용하였으며, 외부모드(external mode)는 수평방향(水平方向) 운동량방정식(運動量方程式)들과 연속방정식(連續方程式)의 차분식(差分式)으로부터 구한 타원형(楕圓型) 차분방정식(差分方程式)을 SOR방법에 의하여 해석하였다. 이와 같은 방법은 계산(計算) 시간간격(詩間間隔)이 표면(表面) 중력파(重力波)에 대한 CFL(Courant-Fredrich-Lewy)조건에 의해 제약을 받지 않아 계산시간(計算時間)의 효율성을 도모할 수 있다. 개발된 모형은 1차원(次元) 수로(水路)에서 취송유(吹送流)의 연직분포(鉛直分布)에 대한 해석해(解析解)와 비교(比較) 및 연직(鉛直) 가변격자(可變格子)의 도입에 따른 오차분석(誤差分析) 정사각형(正四角形) 호수(湖水)에서 취송유(吹送流) 계산(計算) 및 차분화(差分化) 상수(常數)들의 민감도(敏感度) 분석(分析)을 수행하였다.

• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.1020-1029
• /
• 2015

This paper investigated the wearing performance of knitted fabrics made of air vortex yarns using PTT/tencel/cotton fibres in comparison with ring and compact yarns for emotional garment. Wicking property of knitted fabric made of MVS yarns was worse than those by ring and compact yarns, however, drying property of knitted fabric made of MVS yarns was better than those by ring and compact yarns, which was explained as more water vapor transport due to larger openness between fibres in the MVS yarns than those in the ring and compact yarns. Thermal conductivity of knitted fabric made of MVS was lower than those of ring and compact yarns and maximum heat flow(Q_max) at the transient state of MVS knitted fabric was lower than those of ring and compact yarns, which may be attributed to MVS yarn structure that has parallel fibres in the core part of the yarn and fasciated fibre bundles on the sheath part with roughness on the yarn surface. However, pilling of MVS knitted fabric was better than those by ring and compact yarns, which was caused by less and shorter hairy fibres protruded from MVS yarn surface than those of ring and compact yarns. It was observed that tactile hand of MVS yarn knitted fabrics was stiffer than those of ring and compact yarns knitted fabrics. It was explained by low extensibility and compressibility and high bending and shear rigidities of the MVS yarn knitted fabrics, which resulted in bad wearing performance of MVS knitted fabric.