• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.519-526
• /
• 1995

Experiments have been performed to test the analytical tools developed concurrently for the motion-related unsteady pressure in annular passages. The outer cylindrical body was oscillated by a shaker in either rocking motion about a hinge-point or lateral translation motion. In the equilibrium configuration the two bodies are either concentric or eccentric, in the plane of oscillation or normal to it. The unsteady pressure generated by the oscillatory motion with low amplitudes (displacement/radius) was measured on wall of the fixed inner cylinder at various axial and azimuthal locations. The unsteady pressure were compared with theoretical predictions, and agreement was found to be within 10%. Experiments have been shown that the effect of flow velocity on the unsteady pressure is minimal and the pressure increases more or less with oscillatory motion, for low flow velocities (Re = 2 900).

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.2
• /
• pp.126-135
• /
• 2011

In this study, numerical analysis was carried out by using the finite element method to construct the first mode shape of damaged stiffened plates, and the damage locations were detected with two-dimensional discrete wavelet analysis. In the experimental analysis, four different damaged stiffened structures were observed. Firstly, each damaged structure was hit with a shaker, and then accelerometers were used to measure the vibration responses. Secondly, the first mode shape of each structure was obtained by using the wavelet packet, and the location of cracks were also determined by two-dimensional discrete wavelet analysis. The results of the numerical analysis and experimental investigation reveal that the proposed method is applicable to detect single crack or multi-cracks of a stiffened structure. The experimental results also show that fewer measurement points are required with the proposed technique in comparison to those presented in previous studies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.264-269
• /
• 1995

유연계의 제어기 설계를 위한 구동기의 최적 위치 선정법이 제시되었다. 위치 후보의 적합성을 파악하기 위해 초기 외란의 조정에 필요한 최소 입력 에너지와 관련된 모드 가제어도가 정의 되었는데 이는 구동기를 모든 후보 위치에 설치한 이상적 제어기의 성능에 대한 특정 후보 위치의 상대적 성능을 나타낸다. 모드 가제어도로 구성된 목적 함수를 이용해 구동기를 위한 최적 위치의 선정이 가능하였으며, 목적 함수의 절대적 크기를 통해 사용된 구동기의 수의 적절성 역시 파악할 수 있었다. 또한, 시스템 규명을 위한 가진기의 위치 선정 방법이 제시되었으며, 이를 위해 모드 가제어도에 상대되는 모드 가진도가 정의 되었다. 모드 가진도는 정상 상태에서의 특정 모드로의 입력 에너지의 통계적 분포를 나타낸다. 수학적 유도 과정을 통해 제어 시간이 충분히 큰 경우 모드 가제어도가 모드 가진도로 수렴해 감을 보였으며, 이로부터 제어시간이 충분한 경우, 최적의 구동기 위치는 최적의 가진기 위치로도 사용될 수 있음을 보였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.122-132
• /
• 2000

A simplified modeling approach of forced vibration for occupied car seats was demonstrated by using a mathematical model presented in 'Free Vibration of Car seat and Mannequin System' nonlinear and linear equations of motions were rederived for forced vibration and the transfer function was used to calculate the frequency response function. The experimental apparatus were set up and hydraulic shaker was used to obtain the system responses. Through the tests mannequin's head had a lot of problems and the responses with a head and without a head were measured. To explore the effects of linear dampings and friction moments at the joints linear analyses were performed. New sets of linear spring and damping coefficients and torsional dampings at the joints were calculated through parameter study to match up with experimental results. Good agreement between experimental and simulation frequency response estimates were obtained both in terms of locations of resonances and system deflection shapes at resonance indicating that this is a feasible method of modeling seated occupants.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.235-238
• /
• 2002

Microorganisms were isolated from military shooting site. Aerobic batch reactor and resting cell condition experiments were carried out using isolated microorganisms. Experiments were examined at room temperature on shaker and ten-roll mixer. During 10 days of reaction time, TNT was degraded 15.51 ~ 22.47 mg/L from initial concentration(31$\pm$1 mg/L) by aerobic batch reactor. Aerobic resting cell condition experiments were carried out ill phosphate buffer with 58($\pm$1) mg/L TNT at pH of 6.0($\pm$0.2). TNT was degraded 67.8% of initial concentration. The mai or component was found 4-ADNT(4-Aminodinitrotoluene).

• Journal of Microbiology
• /
• v.43 no.3
• /
• pp.272-276
• /
• 2005

Bacillus subtilis ATCC 6633 was grown in BHIB medium supplemented with $Mn^{2+}$ for 96 h at $37^{\circ}C$ in a shaker incubator. After removing the microbial biomass, a lipopeptide biosurfactant was extracted from the supernatant. Its structure was established by chemical and spectroscopy methods. The structure was confirmed by physical properties, such as Hydrophile-Lipophile Balance (HLB), surface activity and erythrocyte hemolytic capacity. The critical micelle concentration (cmc) and erythrocyte hemolytic capacity of the biosurfactant were compared to those of surfactants such as SDS, BC (benzalkonium chloride), TTAB (tetradecyltrimethylammonium bromide) and HTAB (hexadecyltrimethylammonium bromide). The maximum hemolytic effect for all surfactants mentioned was observed at concentrations above cmc. The maximum hemolytic effect of synthetic surfactants was more than that of the biosurfactant produced by B. subtilis ATCC 6633. Therefore, biosurfactant would be considered a suitable surface-active agent due to low toxicity to the membrane.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.375-379
• /
• 2000

In this paper higher order spectral techniques are applied to some simple mechanical systems. The system studied is the nonlinear magnetic beam. This is a simply supported beam, driven by an electromagnetic shaker. At the free end, pairs of repelling magnets are placed. By varying the position and number of magnets, the nature of the nonlinearity can be changed, be it skewed or symmetric, and by varying the distance between the magnets the strength of the nonlinearity can also be altered. Using this controllable system, auto higher order spectral methods are applied, assuming only a knowledge of an output signal.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1195-1201
• /
• 2002

Researches on the FRF-based substructuring method have been mainly focused on vibratory response analysis. Present study Is concerned about the application of the method to the dynamic stress analysis of a air-conditioner compressor mounting bracket in a passenger car. This is performed by using reaction forces that can be obtained by the FRF-based substructuring method. The air-conditioner system, composed of a compressor and bracket, Is analyzed by using the FRF-based substructuring method. The experimental and numerical FRFs are combined to calculate the system responses and reaction forces at the connection point. The dynamic reaction forces plugged into the bracket FE model to compute the stresses of the bracket Dynamic strains by the present method are compared with those from strain-gage test for bracket system on shaker. The comparison shows possibility of practical usage of the method for the real problem

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.117-122
• /
• 2010

The shock performance of hard disk drives has been a serious issue for Car PC. Since the vibration and disturbances from a car gives an adverse effect on a HDD of Car PC, it is necessary to protect a HDD from them. In this study, passive vibration attenuation system for a vehicle HDD was developed. Acceleration from the ground through the tire and suspension system was measured to figure out the frequency translated to Car PC. Critical frequency to Car PC was determined by exciting it with a shaker and measuring a data transmitting speed from HDD. A newly designed vibration attenuation system was fabricated to protect HDD from the acceleration. It was shown that the developed system had an excellent vibration attenuation ability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.978-983
• /
• 2014

This research proposes a method to estimate the fatigue life of solid-state drive(SSD) due to the effect of dummy solder ball under forced vibration. Mechanical jig is developed to describe the SSD in laptop computer. The jig with SSD is mounted on a shaker, and excited by a sinusoidal sweep vibration within the narrow frequency band around the first resonant frequency until the SSD fails. A finite element model of SSD is also developed to simulate the forced vibration. It shows that the solder joints at the corners of controller package are most vulnerable components and that placing dummy solder balls at those area is effective method to increase fatigue life of SSD.