Browse > Article

Design of Passive Vibration Attenuation System for a Vehicle HDD  

Kim, Jin-Nam (Dept. Mech. Info. Eng., Univ. of Seoul)
Kim, Young-Chu (Dept. Mech. Info. Eng., Univ. of Seoul)
Kwon, Won-Tae (Dept. Mech. Info. Eng., Univ. of Seoul)
Publication Information
Abstract
The shock performance of hard disk drives has been a serious issue for Car PC. Since the vibration and disturbances from a car gives an adverse effect on a HDD of Car PC, it is necessary to protect a HDD from them. In this study, passive vibration attenuation system for a vehicle HDD was developed. Acceleration from the ground through the tire and suspension system was measured to figure out the frequency translated to Car PC. Critical frequency to Car PC was determined by exciting it with a shaker and measuring a data transmitting speed from HDD. A newly designed vibration attenuation system was fabricated to protect HDD from the acceleration. It was shown that the developed system had an excellent vibration attenuation ability.
Keywords
Car PC; Vibration Attenuation System; Data Throughput; Rubber Damper;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Jayson, E. M., Murphy, J. M., Smith, P. W. and Talk, F. E., "Shock and Head Slap Simulations of Operational and Nonoperational Hard Disk Drives," IEEE Trans. on Magnetics, Vol. 38, No. 5,pp. 2150-2152, 2002.   DOI   ScienceOn
2 Feliss, B., Murthy, A. N. and Talke, F. E., "Microdrive operational and non-operational shock and vibration testing," Microsyst. Technol., Vol. 13, No. 8-10, pp. 1015-1021, 2007.   DOI   ScienceOn
3 Heo, B., Lee, H. S. and Kim, W., "Optimization of 3.5-in. HDD spindle motors for OP-vibration performance: theoretical prediction and experimental and experimental verification," Microsyst. Technol., Vol. 13, No. 8-10, pp. 759-766, 2007.   DOI
4 Yap, F. F., Vahdati, N. and Harmoto, H., "Design and analysis of vibration isolation systems for hard disk drives," Journal of Magetism and Magnetic Materials, Vol. 303, No. 2, pp. e52-e56, 2006.   DOI   ScienceOn
5 Lee, T.-K. and Kim, B.-S., "The Transmissiblity fo Rubber Damper in the Compact Disc Player," Transaction of the KSMTE, Vol. 17, No. 4, pp. 126-132, 2008.
6 Park, Y.-P. and Yang, H.-S., "Technology Trends for High Recording Density in HDD," Journal of the KSPE, Vol. 18, No. 4, pp. 9-18, 2001.
7 Edwards, J. R., "Finite Element Analysis of the Shock Response and Head Slap Behavior of a Hard Disk Drive," IEEE Trans. on Magnetics, Vol. 35, No. 2, pp. 863-867, 1999.   DOI   ScienceOn
8 Heo, B. and Shen, I. Y., "A parametric study on rocking vibration of hard disk drive spindle motors with fluid-dynamic bearings and rotating-shaft design," Microsyst. Technol., Vol. 11, No. 11, pp. 1204-1213, 2005.   DOI   ScienceOn
9 Jang, G. H., Seo, C. H. and Lee, H. S., "Finite element modal analysis of an HDD considering the flexibility of spinning disk-spindle, head-suspensionactuator and supporting structure," Microsyst. Technol., Vol. 13, No. 8-10, pp. 837-847, 2007.   DOI
10 Lim, S., Chang, Y.-B., Park, N.-C. and Park, Y.-P., "Optimal Design of Rubber Mounts Supporting Notebook HDD for Shock and Vibration Isolation," Asia-Pacific Magnetic Recording Conference, 2006
11 Jintanawan, T., "Vibration of hard disk drive spindle systems with distributed journal bearing forces," Microsyst. Technol., Vol. 12, No. 3, pp. 208-218, 2006.   DOI   ScienceOn
12 Chua, K. T., Yudhanto, A., Ong, E. H. and Mou, J. Q., "Investigation of Soft Failure of Small Form Factor HDD under Forced Vibration," Asia-Pacific Magnetic Recording Conference, 2006.