• Geomechanics and Engineering
• /
• v.21 no.5
• /
• pp.433-445
• /
• 2020

The weakening and softening behavior of soft clay subjected to cyclic loading due to the build-up of excess pore water pressure is well-known. During the design stage of the foundation of highways and coastal high-rise buildings, it is important to study the mechanical behavior of marine soils under cyclic loading as they undergo greater settlement during cyclic loading than under static loading. Therefore, this research evaluates the cyclic stress-strain and shear strength of untreated and treated marine clay under the effects of wind, earthquake, and traffic loadings. A series of laboratory stress-controlled cyclic triaxial tests have been conducted on both untreated and treated marine clay using different effective confining pressures and a frequency of 0.5 and 1.0 Hz. In addition, treated samples were cured for 28 and 90 days and tested under a frequency of 2.0 Hz. The results revealed significant differences in the performance of treated marine clay samples than that of untreated samples under cyclic loading. The treated marine clay samples were able to stand up to 2000 loading cycles before failure, while untreated marine clay samples could not stand few loading cycles. The untreated marine clay displayed a higher permanent axial strain rate under cyclic loading than the treated clay due to the existence of new cementing compounds after the treatment with recycled tiles and low amount (2%) of cement. The effect of the effective confining pressure was found to be significant on untreated marine clay while its effect was not crucial for the treated samples cured for 90 days. Treated samples cured for 90 days performed better under cyclic loading than the ones cured for 28 days and this is due to the higher amount of cementitious compounds formed with time. The highest deformation was found at 0.5 Hz, which cannot be considered as a critical frequency since smaller frequencies were not used. Therefore, it is recommended to consider testing the treated marine clay using smaller frequencies than 0.5 Hz.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2014

Expansion of a roadway on a soft ground can cause settlement of the existing road during embankment construction due to the consolidation characteristics of the soft soil. Many problems related to construction and maintenance, such as deterioration of the surface, decreased safety, and decreased structural stability, could affect the existing road. This scenario is especially true if the roadway foundation is a deep thick soft ground. Therefore, engineers should carefully select a proper design based on the characteristics of the soil layer. In this study, the expansion of the second branch of the Namhae Expressway was selected as the target site because this expressway has been constructing on a soft soil layer approximately 50 m thick. The original design was reviewed, problems were discussed and alternative was proposed through value engineering job plan phases: investigation, speculation, evaluation, development and presentation. In addition, the proposed alternative was evaluated on cost, function and value improvement. Compared to the original design, the proposed alternative saved cost and improved the function and overall value.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2018

We conducted research to develop a solidification agent for the ground surface reinforcement method in which activator is fused by recycling pig iron slag, which is a byproduct generated in the steel making process. The purpose of this research is to solve the problems of surface soil by improving the strength and durability of foundation soil such as soil loss, settlement, sinkhole, etc. by recycling pig iron slag from disused or landfilled steelworks. For this purpose, the possibility of using pig iron slag as a solidification soil was evaluated by the compressive strength, elution test of harmful materials, permeability coefficient test. As a result of the compressive strength test, the values of the strength of the curing 28 days of the solidified soil having the solidification agent mixing ratio of 12% were found to be 0.93, 0.96 and 1.3 MPa, respectively, satisfying the required strength value of 1 MPa, In the case of permeability coefficients, the minimum values were $4.1{\times}10^{-8}$, $7.0{\times}10^{-7}$, and $1.7{\times}10^{-7}cm/sec$, respectively, at the solidification agent mixing rate of 12%. In addition, as a result of the elution test of harmful materials, a small amount was detected in the item of hexavalent chromium but satisfied the inclusion criteria, and in the remaining items, heavy metals were not eluted.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.285-296
• /
• 1999

Preloading method is used to prevent the settling of a foundation and to increase the strength of ground by consolidation settlement in advance. But, the embankment used in preloading method brings large deformation and sliding failure in the soft ground. Recently, reinforcement method is often used in embankment in order to prevent sliding failure. But, until now, the research on the stability analysis considering both the rate of strength increase of clay by embankment load and increase of resistance force by the geosynthetics in the embankment body is not found. In this study, the stability analysis program(REAP) for embankment including these two points is developed. By this program(REAP), the stability analysis can be done about during the gradual increase of embankment and the stability counterplan can be established when the safety factor is lower than allowable safety factor of design. After calculating the position of sliding failure surface, the force of geosynthetics which is selected by either the effective tensile strength or tensile force caused by the displacement of soil mass in this position is applied to stability analysis. And the increase of resisting moment can be calculated by this force. Also, the construction period can be estimated and the time for the appropriate counterplan can be decided in order to maintain the stability of embankment. And then, safe and economical embankment design can be performed.

• The Journal of Fisheries Business Administration
• /
• v.39 no.1
• /
• pp.87-114
• /
• 2008

The cultured tuna production which has suddenly expanded at the short time and the demand for it attract attention. Farming mode, distribution transactions, change of the market (domestic and international) and the price trend are reviewed from the Japan's position which is the biggest consuming country. This paper tries to describe the current status of the food system related to the cultured tuna. Japanese government began the development of the tuna culture technology in 1970. It was by the Fisheries Agency's project. Kinki University which is the large scale private university in Japan participated in the project. After that, 32 years have passed. Kinki University established the full farming of the bluefin tuna in August, 2002. On the other hand, in 1974, one Japanese private enterprise began its tuna farming business in Canada. Kinki University gave this company technical cooperation. Also, in the early stages of the 90s, as for the policy of the overseas fishery cooperation foundation, it supported the tuna farming business in Australia. It is very clear to understand that the long-term technological-development has supported the take-off scene of the tuna culture business not only in foreign countries but also in Japan. The total shipment scale of the cultured tuna expanded very much within about 10 recent years. However, the decrease of the wild tuna catch, the reinforcement of the fisheries regulation and the tuna body to dwarf are remarkable now. Under the condition as the mentioned above, Japan's tuna consumption, especially, in the market at the fatty meat of tuna of the cultured tuna is building up firm status. At present, the Mediterranean Sea coastal countries, Australia, Mexico and Japan have the tuna farming sites. Australia farms the southern bluefin tuna. The others do the bluefin tuna. About for 3 years, Japan farms the juvenile of the tuna. The global production areas are as follows. 8 coastal countries of the Mediterranean Sea; 18,000 tons (61 % of the cultured tuna quantity in foreign countries), Mexico; 4,500 ton (15%), Australia; 7,000 tons (24%). In 2003, Japan has 32 managements and 39 offices for tuna farming. In Japan, Kyushu and Okinawa district, the share shows itself as 80 % of the domestic production quantity. Especially, the share of Amami-oshima Island in Kagoshima Prefecture exceeds 60 %. Therefore, this island has the maximum production scale of Japan. The amount of supply of BT and SBT was 56,000 tons in 2004. In Abroad, the tuna farming business forms a fixed connection between the importer and the wholesaler which have their office in Japan. In the field of the capital composition, the payment in advance, transaction and the way of settlement, each maintains their fixed relation. The market conditions of the cultured tuna are supported by "the decline of price level" and "the expansion of the general public consumption segment". These lead a team merchandising, and it is supported by the fixed business connection of each. This makes the profit of each business which are on the cultured tuna distribution. However, they have competition on the power balance among them.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.211-221
• /
• 2009

With recent trends of super-tallness, atypical plan shapes and zoning constructions in high-rise buildings, a structural stability of the building under construction is arising as a key issue for design and construction plan. To ensure the structural stability under construction, the differential column shortening of vertical members, the lateral displacement of tower frames, and differential settlement of raft foundation by unbalanced distributions of a tower self-weight before the completion of a lateral load resisting system should be checked by construction sequence analysis, which should be performed by systematic combinations with structural health monitoring, construction compensation program, and construction panning. This paper presents the scheme of zone-based construction sequence analysis by using the existing commercial analysis program, to check the stability of high-rise building under construction. This scheme is applied to 3-dimensional structural analysis for a real high-rise building under construction. The analysis includes real construction zoning plans and schedules as well as creep and shrinkage effects and time-dependent properties of concrete. The simplified construction sequence and assumed material properties were continuously updated with the change on construction schedule and correlations with in-situ measurement data.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.59-72
• /
• 1985

This paper deals with the numerical analysis by the (mite element method introducing Biot's theory of consolidation and the modified Cambridge model proposed by Roscoe school of Cambridge University as constitutive equation and using Christian-Boehner's technique. Especially, time interval and division of elements are investigated in vies of stability and economics. In order to check the validity of author's program, the program was tested with one-dimensional consolidation case followed by Terzaghi's exact solution and with the results of the Magnan's analysis for existing banking carried out for study at Cubzac-les-ports in France. The main conclusions obtained are summarized as follows: 1. In the case of one-dimensional consolidation, the more divided the elements are near the surface of the foundation, the higher the accuracy of the numerical analysis is. 2. For the time interval, it is stable to divide 20 times per 1-lg cycle. 3. At the element which has long drain distance, the Mandel-fryer effect appears due to time lag. 4. Lateral displacement at an initial loading stage predicted by author's program, in which the load was assumed as not concentrative. but rather in grid form, is well consistent with the value of observation. 5. The pore water pressure predicted by author's program has a better accordance with the value of observation compared with Magnan's results. 6. Optimum construction control by Matsuo-Kawamura's method is possible with the predicted lateral displacement and settlement by the program.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.29-41
• /
• 2018

In the case of the enlargement levee on the soft foundation, the existing levee and the enlargement levee connection can be damaged due to heterogeneous subsidence such as differential settlement at the joint of the box culvert passing through the levee. This study selected the downstream region of the Geum River and then confirmed the influence of the piping possibility on the levee by performing a 2D seepage analysis and analyzing the seepage tendency according to the position of the box culvert's gate. As a result, the flow velocity and the hydraulic gradient are larger in the upper breakage than the lower breakage, and the upper leak was more vulnerable to the piping than the lower leak. If leaks occur in the gate located on the riverside land, the risk of piping is increased when the water level rises and is maintained highly. In the case of the gate located on the inland, it could be predicted that the leakage could damage the stability of levee by increasing the water pressure inside the levee. As a result, if leakage occurs at any position in the box culvert, the pore water pressure is increased or decreased compared with the case when no leakage occurs. Therefore, if the pore water pressure is drastically reduced or increased compared with the normal case, leakage may occur. However, the result of this study is based on a 2D seepage analysis, and it is likely to be different from actual cases. Therefore, more detailed analysis by 3D analysis is recommended.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.6
• /
• pp.651-659
• /
• 2014

With the popularization of big data environment, big data have been highlighted as a key information strategy to establish national spatial data infrastructure for a scientific land policy and the extension of the creative economy. Especially interesting from our point of view is the cadastral information is a core national information source that forms the basis of spatial information that leads to people's daily life including the production and consumption of information related to real estate. The purpose of our paper is to suggest the scheme of big data analytics with respect to the articles of cadastral resurvey project in order to approach cadastral information in terms of spatial data integration. As specific research method, the TM (Text Mining) package from R was used to read various formats of news reports as texts, and nouns were extracted by using the KoNLP package. That is, we searched the main keywords regarding cadastral resurvey, performing extraction of compound noun and data mining analysis. And visualization of the results was presented. In addition, new reports related to cadastral resurvey between 2012 and 2014 were searched in newspapers, and nouns were extracted from the searched data for the data mining analysis of cadastral information. Furthermore, the approval rating, reliability, and improvement of rules were presented through correlation analyses among the extracted compound nouns. As a result of the correlation analysis among the most frequently used ones of the extracted nouns, five groups of data consisting of 133 keywords were generated. The most frequently appeared words were "cadastral resurvey," "civil complaint," "dispute," "cadastral survey," "lawsuit," "settlement," "mediation," "discrepant land," and "parcel." In Conclusions, the cadastral resurvey performed in some local governments has been proceeding smoothly as positive results. On the other hands, disputes from owner of land have been provoking a stream of complaints from parcel surveying for the cadastral resurvey. Through such keyword analysis, various public opinion and the types of civil complaints related to the cadastral resurvey project can be identified to prevent them through pre-emptive responses for direct call centre on the cadastral surveying, Electronic civil service and customer counseling, and high quality services about cadastral information can be provided. This study, therefore, provides a stepping stones for developing an account of big data analytics which is able to comprehensively examine and visualize a variety of news report and opinions in cadastral resurvey project promotion. Henceforth, this will contribute to establish the foundation for a framework of the information utilization, enabling scientific decision making with speediness and correctness.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2010

Recently, the effective use of closed waste landfill nearby urban areas has been demanded, because of the lack of the usable land. However, the reuse of closed landfill is needed an adequate stabilization of liner system. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetics liners in there. Liner system of waste landfills is an important facility which prevents leachate outgoing from the landfills and also groundwater infiltrating from surroundings into the landfills. During the waste disposal stage, differential settlement and tensile stress of the geosynthetic materials could occur due to impact load of trucks and dozers, waste loads and weak foundation soils. In this study, the tensile strength and tracer test were performed to evaluate the stability of geomembrane liner systems. Based on the tensile strength test result of in-situ geomembrane sample, the yield tensile strength maintain the suitable strength by specification and current law. However, according to the tracer test, the damage of geomembrane liner was detected on sanitary landfill section.