• 무역학회지
• /
• 제45권1호
• /
• pp.259-277
• /
• 2020

The purpose of this study is to analyze the relationship between logistics safety climate, logistics safety behavior, and logistics safety performance and the mediating effects of safety knowledge and safety motivation, and to suggest its strategic implications for the improvement of the logistics safety performance. Based on previous researches related to logistics safety, safety climate, safety knowledge, safety motivation, safety behavior and safety performance, research models and hypotheses were set up and questionnaires were conducted. For the hypothesis test, reliability analysis and validity analysis, confirmatory factor analysis, structural equation model analysis, and bootstrapping were applied. As a result of the empirical analysis, the logistics safety climate had a significant positive effect on logistics safety knowledge, logistics safety motivation, and logistics safety behavior, whereas logistics safety knowledge and logistics safety motivation had a meaningful positive effect on logistics safety behavior. Further, logistics safety behavior was found to have a significant positive effect on logistics safety performance. Safety behavior had a significant mediating effect, but safety knowledge and safety motivation did not. However, logistics safety climate, logistics safety knowledge, and logistics safety motivation did not have a significant effect on logistics safety performance.

• 대한방사선치료학회지
• /
• 제35권
• /
• pp.7-13
• /
• 2023

목 적: 본 연구에서는 자궁경부암이 자궁과 함께 몸 밖으로 돌출되었을 때 맞춤형 Bolus를 사용하는 것이 치료계획에서 선량 전달에 미치는 영향을 평가하고 환자 set-up에서의 재현성을 평가하고자 한다. 대상 및 방법: 치료 계획은 Eclipse Treatment Planning System (Version 15.5.0, Varian, USA)을 사용했으며 치료기는 VitalBeam (Varian Medical Systems, USA)을 사용하였다. 방사선 치료 기법은 3D-CRT로 AP/PA 방향으로 6MV 에너지를 이용하였다. 처방 선량은 1.8 Gy/fx이고 총 선량은 50.4 Gy/28 fx이다. 이온챔버는 Semiflex TM31010 (PTW, Germany)을 사용하였으며, 각 위치 이동 및 종양 중심 선량에 따른 계획선량과 측정된 선량을 비교하여 선량 분포를 분석 및 평가하였다. 첫 번째 측정은 팬텀에 맞춤형 Bolus를 적용하여 중심에서 수행하였으며, 위치 오차를 가정하여 중심에서 X, Y, Z축 방향으로 -2 cm ~ +2 cm 범위에서 이동하면서 측정하였다. 0.5 cm 간격으로 측정하였으며, Y축 방향은 ±3 cm까지 측정하였고 Bolus가 잘못 set-up된 상황도 측정하였다. 측정된 선량은 팬텀의 air cavity 대신 실리콘의 CT Hounsfield Unit (HU) 240으로 보정된 선량을 기준으로 비교하였다. 결 과: 위치 오차는 모든 X, Y, Z축에서 최대 ±2 cm까지 약 -1%이다. Y축의 경우 +3 cm의 차이가 발생했을 때 -9.73%의 오차가 발생하였다. 그리고 Bolus가 피부에 올바르게 부착되지 않았을 때 -2.6%, 완전히 제거되었을 때 3.92%의 오차가 있었다. 결 론: 맞춤형 Bolus를 사용한 경우 치료 선량 분포가 균일했으며, 위치 오차가 발생한 경우에도 처방 선량과 실제 측정값 사이에 큰 차이가 없었다. 기존 시트형 Bolus는 몸 밖으로 튀어나온 불규칙한 모양의 종양을 보완하기는 어렵지만 맞춤형 Bolus는 치료 선량을 균일하게 전달하는데 유용한 것으로 확인된다.

• 벤처창업연구
• /
• 제18권3호
• /
• pp.211-226
• /
• 2023

포스트 코로나 시대에 접어들면서 그 동안 움츠렸던 경제활동들이 다시 활발해지고 있다. 특히 4차 산업혁명 시대 디지털 전환의 기회에 따른 기술창업이 증가되는 추세이지만 창업 교육 콘텐츠는 기술적인 변화의 속도를 따라가지 못하고 있다. 본 연구는 기술창업의 수요 증가로 변화와 발전이 요구되는 창업교육 콘텐츠 중에서 창업 멘토링의 중요성을 확인하고자 한다. 창업 멘토링은 예비창업자와 초기창업자들의 창업 성공을 위해 전문 역량을 보유한 멘토가 멘티들의 수준에 맞게 맞춤형으로 성취 동기, 경영 기술, 문제 해결에 도움을 주는 행동으로 이미 대부분의 창업교육 프로그램에 구성요소로 포함되어 있다. 이를 위해 멘토링 기능 중 멘티의 창업지식과 자기 효능감을 독립변수로 설정하고, 창업의지와 멘토링 만족도를 종속변수로 설정한 후 교육생의 창업 여부를 예비 창업가와 초기 창업가로 분류, 조절변수로 설정하여 연구모형을 설계하고 가설을 설정하였다. 그리고 ICCE 창업스쿨 및 오퍼스 창업스쿨에서 창업 멘토링 교육생들을 대상으로 설문조사를 실시하여 실증적 분석을 진행하였다. 실증 분석 결과를 요약해보자면 첫 번째, 창업 멘토링 기능 중 창업지식과 자기 효능감은 창업의지에 유의적인 정(+)의 영향을 주는 것으로 분석되었다. 두 번째, 창업 멘토링 기능 중 창업지식과 자기 효능감은 멘토링 만족도에 유의적인 정(+)의 영향을 주는 것으로 분석되었다. 세 번째, 창업 여부는 창업지식과 창업의지에 유의미한 조절효과가 없다고 분석되었다. 네 번째, 창업 여부는 멘토링 만족도에 유의미한 조절효과가 없다고 분석되었다. 다섯 번째, 창업 여부가 자기 효능감과 창업의지 사이에 유의미한 조절효과가 있는 것으로 나타났다. 연구 분석 결과를 통해 본 시사점은 첫 번째로 창업교육에서 멘토링기능은 초기 창업가와 예비 창업가 모두에게 창업의지와 만족도에 유의미한 성과를 내는 것으로 분석되어 앞으로도 모든 창업교육에서 멘토링을 적극적으로 활용해야 할 것으로 보인다. 두 번째로 창업 여부와 멘토링기능 및 효과는 대체로 별다른 관련이 없는 것으로 분석되었다. 하지만 멘토링을 통한 자기 효능감 향상을 통한 창업의지는 창업 여부와 유의미한 관련이 있는 것으로 분석되었고, 멘토들이 멘토링을 진행할 때 멘티의 창업 여부를 확인하고 맞춤형 멘토링을 하는 것이 더 큰 자기 효능감과 창업의지를 갖게 하는데 도움이 된다고 나타났다. 현재 국내에서 진행되는 많은 창업교육들은 편의성 등을 이유로 초기 창업가와 예비 창업가를 동시에 교육하고 있다. 하지만 본 연구결과를 통해 소규모로 진행되는 창업 멘토링에서라도 멘티의 창업 여부와 같은 세부적인 분류를 통해 맞춤형 멘토링을 진행하는 것이 멘티의 성공적인 창업과 높은 만족도를 위한 방법이 될 수 있다는 방안을 제시하였다.

• 한국콘텐츠학회논문지
• /
• 제9권7호
• /
• pp.379-389
• /
• 2009

본 연구에서는 그 동안 교과부에서 추진해 온 유러닝 시범학교들의 효과를 분석해 보고 그 성과를 일반화할 수 있는 방안을 제시하였다. 이에 따라 유러닝 효과성의 지표를 만족도, 효능감, 학업성취도, 일반화 가능성으로 정하고 유러닝 연구학교의 운영 결과와 선행연구의 결과를 재분석하고 시사점을 도출하고 그 시사점에 기초하여 유러닝의 효과를 일반화 시킬 수 있는 방안을 제시하였다. 유러닝의 일반화 방안은 도입단계, 확산단계, 정착단계로 나누어 점진적으로 진행할 수 있도록 제시하였으며, 각 단계는 정책, 교수 학습, 품질제고, 기술적용 등의 4개 요소로 세분해 구체적인 내용을 제시하였다. 유러닝의 일반화 방안은 유러닝의 효과를 좌우하는 유비쿼터스 기술의 발전 방향에 따라 달라질 수 있겠으나 본 연구에서 제시한 일반화 방안은 3단계를 통한 점진적인 방법을 취하고 있어 향후 유비쿼터스 기술의 변화에도 어느 정도 대응할 수 있을 것으로 사료된다.

• 설비공학논문집
• /
• 제15권8호
• /
• pp.630-640
• /
• 2003

As tunnel ventilation has recently been playing a major role in the tunnel construction and maintenance, longitudinal ventilation systems with jet fans have been utilized a great deal because they are economical and effective. However, due to the length of tunnels and heavy traffic, it is hard to take the field measurements. In this study, therefore, the computer simulation and the model experiment of producing a wind tunnel were carried out simultaneously and the results were compared. The ultimate objective of this research was to interpret the air flow pattern inside the tunnel with a jet-fan was set up, and to offer the useful data for jet-fan installation and operation. The experiment was carried out with varying the jet-fan diameters, location of installation, the discharge velocity. Result showed that as the initial static pressure came up with the negative pressure, the tunnel air flowed into the inside of tunnel from outside due to the entrainment-effect and the backflow-phenomenon by separation-effect was observed in the lower half part of the tunnel. As the jet-fan was getting closer to the tunnel wall, the entrainment-effect caused by the interaction with the wall was increased; however, the mixing distance and irregular flow section became longer, and also the air pressure loss generated by wall friction was large.

• Child Health Nursing Research
• /
• 제10권1호
• /
• pp.108-116
• /
• 2004

Purpose: There has been a number of reports on elution of bisphenol-A, an endocrine disrupting chemical, from milk bottles, all concerning the potential health effect of the substance. In this study, we measured the elution of bisphenol-A from milk bottles during boiling-water sterilization, to suggest a safe sterilization method. Method: Through the survey of 200 mothers, 78.5％ of them expressed their concern on the possible harmful effect of bisphenol-A, which might be eluted from the bottles. And it was found that most mothers use boiling-water to sterilize bottles; duration of boiling bottles could be divided into three groups of 3, 5, and 10 minutes. We measured the elution of bisphenol- A from three different brands of bottles, subject to various mode of sterilization found in the survey. Result: In all the measurements, the concentration of the eluted bisphenol-A was in the range of 0.3 - 0.7 ppb, far below 2.5ppm, the level set up by Korea Food ％amp; Drug Administration(KFDA) for a potential harmful effect. Conclusion: Although trace amount of bisphenol -A can be eluted from polycarbonate milk bottles during sterilization, and bottle feeding, the amount is found to be too small to cause any health related impact for infants.

• 한국조리학회지
• /
• 제14권4호
• /
• pp.188-202
• /
• 2008

The purpose of this research was to investigate the effects of various restaurant choice attributes on customer satisfaction that has positive influence on repatronage and word of mouth intent. This study examined relevant literatures, set up some hypotheses to solve main questionable considerations and made a corresponding empirical analysis. For the empirical analysis, a questionnaire survey was applied to total 478 customers who had visited restaurants around the northern part of Gyeong-gi province. The model was tested using SPSS 12.0 and AMOS 5.0 with 472 samples which received a 99% usable response rate. The results of empirical analysis were as follows: 1) menu quality has a significant effect on customer satisfaction and word of mouth intent. 2) service quality and convenience have a significant effect on customer satisfaction. 3) customer satisfaction has a significant effect on repatronage and word of mouth intent. 4) word of mouth intent has a significant effect on repatronage intent.

• 복식
• /
• 제22권
• /
• pp.333-344
• /
• 1994

In this study an experiment was made using the function of computer simulation os to whether the phenomenon of optical illusion takes place also in clothing on the human body three-dimensional space through the case study of the Gestalt illusion of planar con-traction and expension by amodal completion in perceptual organization. One woman of latter 30s was selected as the experimental subject. She was made to wear the experimental clothing and then the frontal picture was projected of in the experimental clothing which was scanned into the com-puter. For the sake of the contractive experiment 5 stages were divided by 5-15cm the thick-nes of the black vertical line in the center of the upper garmet as the variable and for the sake of the expansive experiment the skirt length was set as the variable. It length measured 50-90cm which was divided by 10cm into 5 stages and simulated using the CAD. The basic design and the experimental de-sign were made one pair and the pictures totalled 20 pictures such as ten pictures save the human body for the estimation of the up-per garmet alone and ten pictures for the ob-servation of the effect on the human body. The extimating panel consisting of 20 panellers estimated contraction/expansion in the estimation of the upper garmet and the tall effect/the slim effect in the estimation of optical illusion as the estimating factors on the 9-point scale. All the date from experiment were analyzed by ANOVA(analysis of variance) and DUNCAN'S multiple range. As a result the experimental designs all showed a significant optical illusion in comparision with the basic design.

• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.60-67
• /
• 2006

In modem days when architectural materials have grave impacts on overall design expression, materials for architecture, especially finishing materials have become the most essential elements for the design expression, as architectural space and form have been. When it comes to the architectural materials, they can be conceived by visual and tactile sensory system and perceptional system which based on memory and experience. This study confirms how materials bring into effect on architecture in the sense of its design. The main subject of this analysis is expression method of architectural finishing materials. Also, this study finds out the relationship between finishing materials and the images of materials by analyzing the effect factor of architectural material expression with the perspectives of materials, formal and environments and by examining roles of the architectural materials in design. The material factor, in the expression of materiality, is how to make tectonic space and to vary the surface of building as finishing material design. The formal factor is related to set up the new direction in the architectural form and to create the dynamic and informal space. And the social and cultural environment as the effect factor gives new situation and context to architectural material expression. This principle enables us to use architectural materials as one of the important elements which express the whole characteristics of the area.

• 토지주택연구
• /
• 제8권3호
• /
• pp.123-130
• /
• 2017

This study aims to empirically verify the impacts of career learning on employability and the mediating effect of job expertise in a public corporation. For the empirical analysis, I surveyed 958 employees(valid respondents) working in a public corporation. And the structural equation modeling(SEM) was used to statistically analize and test the research hypotheses. The independent variable is 'career learning', the dependent variable is 'employability' and the mediating variable is 'job expertise'. The results are as follows. The empirical analysis shows that the positive effects of 'career learning ${\rightarrow}$ job expertise', 'job expertise ${\rightarrow}$ employability' and 'career learning ${\rightarrow}$ employability' are all verified. And the mediating effect of job expertise between career learning and employability is also partially verified. So, all the proposed hypotheses are accepted. From this result, I can clearly suggest that the employees can be growing to professionals with high employability when they retire if they are voluntarily and self-motivated to set up their career plan and to enhance their job expertise. In this context, it is expected that the company should support the employees to continue to strengthen their own expertise in their job place through their mid-long term career learning plan.