• Korea journal of population studies
• /
• v.8 no.2
• /
• pp.79-92
• /
• 1985

Fertility has been declined since 1966 (see Table 1). This fertility reduction was duely caused by age at first marriage, induced abortion and contraceptive practice which has been largely increased in recent years. Although tbe proximate determinant such as induced abortion, age at marriage and breastfeeding can and do have an effect on fertility, the principal cause of the reduction in fertility in Korea during the fertility transition can be supported by correlation between level of fertility and contraceptive prevalence (See Fig. 4). Taking a regression equation between fertility (TER. Y) and prevalence level (X), the total fertility rate in 1984 was estimated as 1.9 and 2.1 based on lenear and expotential function shown as follow; $Y_1$=5.709-0.0549 X and $Y_2$_______80________ 1+e2.433+0.017X ($R^2$=O. 93) ($R^2$=0. 96) Where $Y_1$ and $Y_2$ denote total fertility rates obtained through two equations respectivelly. The peak of contraceptive prevalence was assumdd as 80 percent which is almost upper limit in human society. On the other hand, an observed value of 1984 fertility level obtained from five month period shows 2.1 which is coincident with logistic fitting after the adjustment of response error assumed around 10 to 20 percent, At any rate, fertility of Korean women will have been reached replacement level (2.1) by 1985.Thus policy for family planning program must be reviewed toward the direction of integrated approach particularly with MCH program inasmuch as fertility in Korea has already shown population replacement level that require more good quality of service in family planning and their There must be an advanced level of fertility in Korea because wide use of contraception and induced life abortion and age at marriage will effect modern fertility which shows up and down trend between 2.1 and 1.5 in general.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.549-555
• /
• 2023

Jacking force loss management inside the PSC Box girder of a common high-speed railway is a very important feature in girder performance, and requires detailed management during the maintenance of the girder. This study aimed to analyze the timing of re-tension prediction of PSC Box girder based on the reduction level of the packing force inside the girder and the results of the tension loss measured without the train load test. As a result of predicting the timing of re-tension according to the level of tension reduction of the PSC Box Girder, the Jacking Force Loss curve was gently analyzed before the structure reached 17 years after confirmed completion, and 17 years later, it was found that the jacking force loss curve progressed rapidly. The results confirmed that the tension of the structure decreases with the service life increase, but considerably decreases as the structure ages. Therefore, more data and research on tension loss of facilities over 20 years are much required.

• Korean Journal of Weed Science
• /
• v.30 no.2
• /
• pp.122-134
• /
• 2010

We investigated the levels of resistance and accumulation of terapyrroles, reactive oxygen species, lipid peroxidation, and antioxidative enzymes for reasons of growth reduction in herbicide-transgenic rice overexpressing Myxococcus xanthus, Arabidopsis thaliana, and human protoporphyrinogen oxidase (Protox) genes. The transgenic rice overexpressing M. xanthus (MX, MX1, PX), A. thaliana (AP31, AP36, AP37), and human (H45, H48, H49) Protox genes showed 43~65, 41~72 and 17~70-fold more resistance to oxyfluorfen, respectively, than the wild type. Among transgenic rice lines overexpressing Protox genes, several lines showed normal growth compared with the wild type, but several lines showed in reduction of plant height and shoot fresh weight under different light conditions. However, reduction of plant height of AP37 was much higher than other lines for the experimental period. On the other hand, the reduction of plant height and shoot fresh weight in the transgenic rice was higher in high light condition than in low light condition. Enhanced levels of Proto IX were observed in transgenic lines AP31, AP37, and H48 at 7 days after seeding (DAS) and transgenic lines PX, AP37, and H48 at 14 DAS relative to wild type. There were no differences in Mg-Proto IX of transgenic lines except for H41 and H48 and Mg-Proto IX monomethyl ester of transgenic lines except for MX, MX1, and PX. Although accumulation of tetrapyrrole intermediates was observed in transgenic lines, their tetrapyrrole accumulation levels were not enough to inhibit growth of transgenic rice. There were no differences in reactive oxygen species, MDA, ALA synthesizing capacity, and chlorophyll between transgenic lines and wild type indicating that accumulated tetrapyrrole intermediate were apparently not high enough to inhibit growth of transgenic rice. Therefore, the growth reduction in certain transgenic lines may not be caused by a single factor such as Proto IX, but by interaction of many other factors.

• Corrosion Science and Technology
• /
• v.4 no.4
• /
• pp.147-154
• /
• 2005

The creep resistance of geogrids is one of the most significant long-term safety characteristics used as the reinforcement in slopes and embankments. The failure of geogrids is defined as creep strain greater than 10%. In this study, the accelerated creep tests were applied to polyester geogrids at various loading levels of 30, 50% of the yield strengths and temperatures using newly designed test equipment. Also, the new test equipment permitted the creep testing at or above glass transition temperature($T_g$) of 75, 80, $85^{\circ}C$. The time-dependent creep behaviors were observed at various temperatures and loading levels. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. The shifting factors(AFs) were obtained using WLF equation. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results confirmed that the failure distribution of geogrids followed Weibull distribution with increasing failure rate and the lifetimes of geogrids were close to 100 years which was required service life in the field with 1.75 of reduction factor of safety. Using the newly designed equipment, the creep test of geogrids was found to be highly accelerated. Furthermore, the time-temperature superposition with the newly designed test equipment was shown to be effective in predicting the lifetimes of geogrids with shorter test times and can be applied to the other geosynthetics.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.233-238
• /
• 2013

In the case of casting materials or ductile materials for marine equipment, it is common to employ a surface modification for achieving cost reduction and improvement in strength. In particular, aluminium bronze ALBC3 exhibits excellent corrosion resistance, and thus widely used for marine application. However, application of the material under high-velocity seawater flow may induce electrochemical corrosion damage and physical damage such as cavitation erosion, leading to shorter service life of equipment. In this study, surface modification was carried out on ALBC3 alloy for different shot peening stand-off distances, and the physical hardness and electrochemical characteristics before and after modification were investigated. The results in each case showed the hardness increase in comparison with non-peened specimen, and the maximum hardness improvement(50 %) was found in 10 cm of shot-peening stand-off distance. It is observed that the electrochemical characteristics were irrelevant to application of shot peening.

• Architectural research
• /
• v.12 no.2
• /
• pp.73-83
• /
• 2010

Aging is accompanied with numerous transitions in life, and residential environment becomes a pivotal part of the elderly's lives. Physically supportive housing linked with services emerges in midst of the reality that retrofitting housing with special features has been seriously underfunded. The purpose of this study was to examine the residential satisfaction of the elderly in two types of independent living arrangements specially designed for the elderly. The indices of residential supportiveness were developed, and the questionnaire survey was adopted for data collection. Two hundred eighty residents living in two different kinds of senior housing participated in the survey, and all the collected responses were used for data analysis. The finding showed that almost all of the elderly positively assessed their senior living. That is, the statistical analysis illustrated that satisfaction indices of senior living significantly and positively contributed the satisfaction with overall residential environment. Satisfaction with physical environment was the only strong predictor in explaining current residential satisfaction of the elderly in senior rental housing, and accounted for a small proportion of the variance in the dependent variable. Since affordability was the biggest concern among residents in senior housing, it was of significance that long-term housing affordability was ensured and reduction in service cost by utilizing economies of scale was pursued.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.142-150
• /
• 2016

This study examined the general housing awareness and awareness on house sharing of college students who are present residents as well as potential residents of shared houses. To achieve this purpose, structured questionnaires were used as a survey tool to understand students' awareness on housing and opinions on house sharing including a range of space sharing, preferences on house mates, and demands on services and facilities. The survey was conducted of college students in Busan, and the data were analyzed by the PASW Statistics 18.0 program. The findings of this study are as follows: 1) The housing awareness was categorized into seven factors by factor analysis. The subjects valued 'personality factor' in the housing awareness. 2) Regarding preference of house mate type, participants preferred a person who has similar lifestyle and in the same gender. 3) As for the space sharing, the subjects didn't want to share a bathroom and shower. Also, they preferred medium or large scale dormitory layout type to small sized apartment type. 4) The most positive aspect of house sharing was 'Reduction of rental and maintenance cost'. On the other hand, 'Difference of daily life pattern' was the most negative aspect of house sharing. 5) In case of services and community spaces, they preferred 'delivery storage service' and 'coin-operated laundry facility'.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.9
• /
• pp.273-302
• /
• 1998

INTERNATIONAL MONITORY FUNDS wave swept the Economic structural insolvency lies one upon another with low growth, low trust, low prices, low interest and low employment as[2 down 3 up] phenomenons have been distinguished and low enterprise a control of structures due to forecasting 200 million unemployment, including 600 million unemployed the head of a family population have a difficulty in their life. Only way to give them hope is through the commencement of an enterprises to have 2nd career development. But end of 1995, 467,00 dining out companies have been established and recently business are in depression. There are many business conditions of change of business or reduce operations, if unemployment populations of 5%, 100,000 peoples doing the commencement of an enterprises, enormous number of dining out companies will be increased and the competition will be fierce, especially those who have short knowledge and experience doing the commencement of an enterprises have high failure than success which will give a problems to society. Our study is to make the commencement of an enterprise to reducing the faiure and to be successful for main point to successful commencement of an enterprise, the established can self capability and mental condition, the main important factor is types of industry selection, successful and those established who takes this conditions will very carefully inspect various matters by scientifically and rationally mind industrys propulsion graphs and open official fixture graphs will framing detail factors. One by inspect the reduction of failure, and successful commencement of an enterproses mind industry have been studied.

• Architectural research
• /
• v.7 no.1
• /
• pp.49-54
• /
• 2005

Conventional studies have focused on the reduction in the water-cement ratio, the use of various admixtures, etc., to ensure the durability of reinforced concrete structures against such deterioration factors as carbonation and chloride attack. However, improvement in the concrete quality alone is not considered sufficient or realistic for meeting the recent demand for a service life of over 100 years. This study intends to improve the durability of reinforced concrete structures by improvement in the reinforcing steel, which has remained untouched due to cost problems, through subtle adjustment of the steel components to keep the cost low. As a fundamental study on the performance of Cr-bearing rebars in steel reinforced concrete structures exposed to corrosive environments, The test specimens were made by installing 8 types of rebars in concretes with a chloride ion content of 0.3, 0.6, 1.2, 2.4 and $24kg/m^3$. Corrosion accelerated curing were then conducted with them. The corrosion resistance of Cr-bearing rebars was examined by measuring crack widths, half-cell potential, corrosion area and weight loss after 155 cycles of corrosion-accelerating curing. The results of the study showed that the corrosion resistance increased as the Cr content increased regardless of the content of chloride ions, and that the Cr-bearing rebars with a Cr content of 5% and 9% showed high corrosion resistance in concretes with a chloride ion content of 1.2 and $2.4kg/m^3$, respectively.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.1
• /
• pp.39-46
• /
• 2016

In this study, different proportions of glass beads used for road marking were added into the concrete samples to reduce the temperature gradient through the concrete pavement thickness. It is well known that decreasing the temperature gradient reduces the risk of thermal cracking and increases the service life of concrete pavement. The extent of alkali-silica reaction (ASR) produced with partial replacement of fine aggregate by glass bead was investigated and compressive strength of concrete samples with different proportion of glass bead in their mix designs were measured in this study. Ideal results were obtained with less than 0.850 mm diameter size glass beads were used (19 % by total weight of aggregate) for C30/37 class concrete. Top and bottom surface temperatures of two different C30/37 strength class concrete slabs with and without glass beads were measured. It was identified that, using glass bead in concrete mix design, reduces the temperature differences between top and bottom surfaces of concrete pavement. The study presented herein provides important results on the necessity of regulating concrete road mix design specifications according to regions and climates to reduce the temperature gradient values which are very important in concrete road design.