Lifetime Prediction of Geogrids for Reinforcement of Embankments and Slopes through Time-Temperature Superposition

  • Koo, Hyun-Jin (Reliability Assessment Center, FITI Testing & Research Institute) ;
  • Kim, You-Kyum (Reliability Assessment Center, FITI Testing & Research Institute) ;
  • Kim, Dong-Whan (Reliability Assessment Center, FITI Testing & Research Institute)
  • Published : 2005.08.01

Abstract

The creep resistance of geogrids is one of the most significant long-term safety characteristics used as the reinforcement in slopes and embankments. The failure of geogrids is defined as creep strain greater than 10%. In this study, the accelerated creep tests were applied to polyester geogrids at various loading levels of 30, 50% of the yield strengths and temperatures using newly designed test equipment. Also, the new test equipment permitted the creep testing at or above glass transition temperature($T_g$) of 75, 80, $85^{\circ}C$. The time-dependent creep behaviors were observed at various temperatures and loading levels. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. The shifting factors(AFs) were obtained using WLF equation. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results confirmed that the failure distribution of geogrids followed Weibull distribution with increasing failure rate and the lifetimes of geogrids were close to 100 years which was required service life in the field with 1.75 of reduction factor of safety. Using the newly designed equipment, the creep test of geogrids was found to be highly accelerated. Furthermore, the time-temperature superposition with the newly designed test equipment was shown to be effective in predicting the lifetimes of geogrids with shorter test times and can be applied to the other geosynthetics.

Keywords

Acknowledgement

Supported by : Korea Ministry of Commerce, Industry and Energy

References

  1. T. S. Ingold, The geotextiles and geomembranes manual, Elsevier Advanced Technology, pp.71-246 (1981)
  2. R. M. Koerner, Designing with geosynthetics, Prentice Hall Co., pp.328-393 (1994)
  3. J. A. Finnigan, The creep behavior of high tenacity yams and fabrics used in civil engineering applications, Proceedings of the International Conference on the Use of Fabrics in Geotechnics, Paris, France, pp.645- 650 ( 1977)
  4. J. D. Ferry, Viscoelastic properties of polymers, 3rd Edition, John Wiley and Sons, NY, USA, (1980)
  5. ZK.C. Yeo, The behavior of polymeric grids used for reinforcement, Ph. D. thesis, University of Stathelyde, Glasgow, U. K. (1985)
  6. J. Muller-Rochholz and R. Kirschner, Creep of geotextiles at different temperatures, Proceedings of 4th International Conference on Geotextiles, Geomembranes and Related Products, The Haque, pp.657-659 (1990)
  7. D. I. Bush, Variation of long term design strength of geostnthetics in temperature up to 40${\circ}C$, Proceedings of 4th International Conference on Geotextiles, Geomembranes and Related Products, The Haque, pp.673-676 (1990)
  8. H. Y. Jeon, Seong Hun Kim, and Han Kyu Yoo, Assessment of long-term performances of polyester geogrids by accelerated creep test, Polymer Testing, 21, 489 (2002)
  9. Wayne Nelson, Accelerated Testing: Statistical Models, Test Plans, and Data Analyses, John Wiley and Sons, NY, USA, (1990)
  10. RSK 0009, Geogrids for Reinforcement of embankments and slopes, (2003)
  11. ASTM D4595, Test method for Tensile Properties of Geotextiles by the Wide Strip Method, (1986)
  12. ASTM D5262, Standard Test method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics, (1997)