• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2014

In this paper, we present our analysis of tribological failure examples for an anti-lock brake system(ABS) in a car. The study range of this paper is to improve the quality of ABS system by analyzing with sensor, computer, actuator and oil lines. In the first example, the brake leak from hydraulic supply line in a caliper on the rear left side of the ABS hydraulic modulator. This produces the sponge phenomenon, where the car does not brake even when the driver operates the brake pedal. The hydraulic unit operating ABS is actuator that play role regulating drive condition according with the oil pressure supplied with wheel of a car. In the second example, the service man does not completely tighten the fixed bolt after repairing the car. This causes the ABS warning lamp to light up as the ABS wheel speed sensor cannot detect whether the ABS has been activated. In the third example, the ABS electronic control unit is separated from the soldered part of the inner circuit board. Consequently, the ABS fails in control because the ABS motor pump receives no-signal for the hydraulic unit. The wheel speed sensor has to large durability because of giving signal of acting condition to computer by detected the acceleration and deceleration of wheel of a car. In the fourth example, the ABS warning lamp lights up of when cracks propagate in the circuit board soldering part. The circuit of this computer is very important part for input and output the operating signal of system. Such failures can aggravate the durability of the ABS. Thus, the ABS needs to be optimized to eliminate malfunction phenomenon.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1221-1234
• /
• 2010

MANET(Mobile Ad-hoc Network)s have been researched primary at routing protocols and at the guarantees of QoS(Quality of Service) for mobile environments. Otherwise the Ubiquitous Sensor Networks (USNs) have some limitations in power energies and in processing of sensing data, as well as their network topologies are frequently changed by fading off and node failures. Thus we should redesign network protocols with concerning to energy efficiency for the USNs above all. In this paper, we focus on the protocol interface for managing for USNs based on the surveys. And then we figure the topology of USNs out and design the network protocol interface to make power saved, with data gathering and processing more efficient using our designed packet structures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.379-389
• /
• 2010

It is very important to determine a target probability of failure in reliability based design such as an allowable factor of safety in working stress design because they are indices to judge the stability of structures. We have carried out reliability analyses of nationwide gravity type quay walls and found that sliding and foundation failures of quay walls were dominant failure modes for every case of loads. And a target probability of failure for bearing capacity of foundation of quay wall was also determined in this study. Of several approaches which have been suggested until now, a couple of reasonable approaches were used. Firstly, in order to consider the safety margin of structures which have been executed so far, the reliability levels of existing structures were assessed. And then a mean probability of failure for the quay walls was estimated. In addition, life cycle cost(LCC) analyses for representative structures were performed. Probabilities of failure for several quay walls were calculated with changing the width of each quay wall section. LCC of quay wall which is requiring case by case during the service life was evaluated, and also the optimum probability of failure of quay wall which minimizes LCC was found. Finally, reasonable target probabilities of failure were suggested by comparing with mean probability of failure of existing structures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.76-81
• /
• 2016

The Internet of Things (IoT) interconnects every device by allowing them to communicate directly and share information with each other and has been recently applied to various industrial fields. The integration of home appliances with IoT has led to the creation of new markets by providing quick and better experience to consumers. Although IoT has been integrated into most modern day appliances, there have been few developments for kitchen appliances. This paper presents the development of integrating IoT with the blender, one of the most widely used appliance in the kitchen. A custom application was made to interact with the blender that provides three main functions: digital controller, maintenance, and defrosting alarm. The function of digital controller provides wireless control to the conventional blender. The maintenance function detects and alerts the user on blender reliability with the intent of enabling the anticipation of hardware failures. The defrost alarm alerts the user when the ingredient has reached the appropriate and desired temperature when cooking frozen food.

• Information Systems Review
• /
• v.16 no.1
• /
• pp.17-35
• /
• 2014

Social collaboration and knowledge sharing among experts are the key characteristics of information system development projects. But the difficulty and complexity of communication may be the cause of the project failures. This study analyzes the influence of on-line social networking as communication system in information system development projects. A model has been developed to relate system, knowledge and social factors of on-line social networking to the performance of project members. Transactive Memory System (TMS), describing knowledge sharing process in human relationship, is used as a mediator. The analysis concludes that knowledge and social characteristics have positive effect on the members' performance, implying that the use of mobile devices and PCs as a social communication tool can be an effective way to enhance the possibility of project success.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.119-128
• /
• 2016

Use of ICT in Government has ability to improve service delivery to its citizens, and yet many developing countries have lagged behind in the implementation of e-Government. Many e-Government initiatives also failed to achieve their objectives in developing countries. This paper therefore aims to identify critical failure or success factors in Kenya, using Heeks' Factor Model. A survey questionnaire was developed and data were collected and analyzed from officials and interested citizens. The analysis results enabled to highlight seven specific success and failure factors, and their constituent elements in Kenya. The Kenyan overall e-Government implementation score belongs to the Zone of Improvement (3.52 of total 5.0), which means partial success or failure. The enablers of e-Government projects are good strategy formulation, and internal and external drive, whereas main failures of e-Government are weak ICT infrastructure. The areas for improvement are project management, design, competencies and funding. Data analysis highlights both strengths and weaknesses for each factor or variable. In particular, Kenyan government excels at the drive for change by top to bottom government officers as well as external stakeholders, while the government officers who are using e-Government are satisfied with the availability of vision, strategy and plan of e-Government implementation. Both technologies and e-transactions laws were the worst of all the variables in e-Government implementation. Two areas should be improved using immediate corrective action. In-depth study reveals that government officers and citizens can't fully use their laptop and mobile devices due to the lack of both ICT network and its operating technology, and legal system associated with the transaction of business information. Finally, the study ends up with recommendations for policy makers to shape the future of e-Government system in both developing and developed countries.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.155-159
• /
• 2002

Wire ropes are used in a myriad of various industrial applications such as elevator, mine hoist, construction machinery, lift, and suspension bridge. Especially, wire rope of crane is important component to container transfer. If it happens wire rope failures in operating, it may lead to safety accident, economic power loss by productivity decline, competitive power decline of container terminal and so on. To solve this problem, we developed wire rope fault detecting system as a portable instrument, and this system is consisted of 3 parts that fault detecting part using hall sensor, permanent magnets and analog unit, and digital signal processing part using data acquisition card, monitoring part using wavelet transform, denoising method. In this paper, a wire rope is scanned by this system after makes several broken parts on the surface of wire rope artificially. All detected signal has external noise or disturbance according to circumstances. So, we applied to discrete wavelet transform to extract a signal from noisy data that was used filter. In practical applications of denoising, it is shown that wavelet pursue it with little information loss and smooth signal display. It is verified that the detecting system by denoising has good efficiency for inspecting faults of wire ropes in service. As a result, by developing this system, container terminal could reduce expense because of extension of wire ropes exchange period and could competitive power. Also, this system is possible to apply in several fields like that elevator, lift and so on.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.247-272
• /
• 2011

Because of operating and ordering vessels over 10,000 TEU, the strategic alliance between liner shipping companies will be diversified and activated more briskly to secure cargo quantities, minimize costs, secure profits, improve service quality and manage stable business. Many of prior studies concerning strategic alliance are carried out to clarify success factors, motives or to explain how to select a good partner for success. But over 70% of strategic alliance has been resulted in failure. Because failures of strategic alliance occur much more frequently than success, negative effect factors in strategic alliance have to be measured and be adapted to changing conditions in the shipping market. To improve negative effect factors, shipping companies should make an effort to establish reliable relationships between partners and suppress claims by clearing off imprecise contract terms. And it is necessary to increase satisfaction of each individuals and minimize complexity occurred due to the exterior relationships for the successful strategic alliance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.65-70
• /
• 2005

For the base station or repeater which is in operation as part of a mobile communication system, any kind of degradation in antenna performance such as lowered gam or increased VSWR which maybe due to aging of antenna, connector corrosion or other environmental factors, is difficult to detect and react to immediately. In this paper, a VSWR measurement device which is capable of detecting the VSWR of a PCS forward path ($1,840\~1,870$MHz) antenna in operation in real time without any interruption in service is developed. Such regular measurement will allow the prediction of any serious failures and insure reliable operation of the antenna. All components of the antenna VSWR measurement device was researched so that the whole system could be produced and shown to be accurate in measuring the YSWR of an actual RF repeater in operation, proving it's effectiveness.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.66-77
• /
• 2014

UTIS(Urban Traffic Information System) directly collects link travel time in urban area by using probe vehicles. Therefore it can estimate more accurate link travel speed compared to other traffic detection systems. However, UTIS includes some missing data caused by the lack of probe vehicles and RSEs on road network, system failures, and other factors. In this study, we suggest a new model, based on k-NN algorithm, for imputing missing data to provide more accurate travel time information. New imputation model is an adaptive k-NN which can flexibly adjust the number of nearest neighbors(NN) depending on the distribution of candidate objects. The evaluation result indicates that the new model successfully imputed missing speed data and significantly reduced the imputation error as compared with other models(ARIMA and etc). We have a plan to use the new imputation model improving traffic information service by applying UTIS Central Traffic Information Center.